Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 13351 | 3 Axis Fully Automatic Surface Grinder |
2005 |
Aba Z & B |
Starline 500E |
Good |
sold |
Photo /
More Info. |
20 Hp Profile: Aba Z & B
Starline 500E
Siemens Control 840 D
Coolent
Wheel Dresser
|
|
Ad # 13352 | 3 Axis Fully Automatic Surface Grinder |
2005 |
ABA Z & B |
Starline 600F |
Good |
sold |
Photo /
More Info. |
30 Hp Profile Grinder: ABA Z & B Starline 600F Profile grinder
30Hp
Wheel Dresser
Siemens control
Voltage 480/ 3 Phase
Please verify std. specs below
Technical details: maximum table load 600 kg,
adjustment X-axis 940 mm, Y-axis 500 mm, Z-axis
410 mm. With C axis 100 - 3000 rpm, peripheral
speed 35 m/s, AC motor power up to 22 kW,
dressing with a roller or diamond, tracking of
the coolant nozzle, standard software without
grinding or dressing programs, no filtering
system. The machine is characterized in
particular by: Preloaded precision guideways in
the X-, Y-and Z-axis. This control system is
characterized by: high accuracy, smooth running
and durability. Minimum feed values and high
feed rates can be achieved due to minimal
friction. Low heat generation guarantees a
constant accuracy. AC servo drives are
available in the Y-and Z-axis. Ballscrew is
preloaded without clearance. Hydrostatic lead
screw is installed in the X-axis. Absolute
measurement systems: In the Y-and Z-axis
grinding spindle - Spindle bearings with grease
lubrication - Ultra-precision bearings with
defined prestressing - Fixed bearings in front
for a precise axial position - Labyrinth seal
Technical details
grinding length 600 mm
grinding width 400 mm
grinding height 500 mm
control Fanuc 320i
magnetic plate size 500 x 300 mm
grinding wheel width x diameter 400 x 50 x
127 mm
weight approx. 4500 kg
dimensions approx. 3600 x 3400 x 2570 mm
|
|
Ad # 2728 | 3 Axis Fully Automatic Surface Grinder |
1993 |
Acer |
AGS 2060 AHD |
Very Good |
sold |
Photo /
More Info. |
Acer Fully Automatic - Surface Grinder 20 x 60" W/auto downfeed: Extra wheels
Wheel Dresser
Auto down feed cycle-fully automatic
chuck-electro mag.
Model:AGS-2060AHD w/ Standard Specs-please verify
STD. Accessories comes with std.
Features: (3-Axis Auto Movement)
·Precision “Turcite-B” Ways
·Hydraulic Table & Electronic Crossfeed
·Crossfeed Column Movement
·Auto Incremental Downfeed
·Auto Lubricator, Rapid Elevation
·Maximum Working Capacity: 20” x 60”
Coolant System w/ Magnetic Separator & Paper Filter
Parallel Dresser
“ACER” 20” x 60” Electro-Magnetic Chuck
Variable Chuck Control Master
Specifications:
Longitudinal Travel:64”Grinding Wheel:16” x 2” x 5”
Cross Feed Travel:22”Vertical Graduation:0.0001”
Spindle Center to Table:23-5/8”Vertical Revolution:0.02”
Table Size:20” x 60”T-Slot:3” x 9/16”
Wheel Speed:1,750 RPMTable Speed:16 - 80 ft./min.
Spindle Motor:10 HP (V3)Net Weight:12,100 lbs.
Auto. Increment Downfeed:Variable 10 Step (0.0002” - 0.002”)
Standard Accessories:
1 pc. Wheel Balancing Base1 pc. Wheel Balancing Arbor
1 pc. Grinding Wheel1 pc. Wheel Flange
1 pc. Manual Diamond Dresser1 pc. Halogen Work Light
1 set Toolbox w/ Tools1 set Splash Guard
|
|
Ad # 12881 | 3 Axis Fully Automatic Surface Grinder |
1982 |
Blohm |
12444 |
Good |
sold |
Photo /
More Info. |
8" x 18": Blohm Korber
Surface Grinder
10" Wheel Max
Power X, Y, Z
Year 1982
8" x 18" walker electro Magnetic Chuck
|
|
Ad # 14900 | 3 Axis Fully Automatic Surface Grinder |
|
Blohm |
12 x 24 |
|
sold |
Photo /
More Info. |
12 x 24: Blohm 12 x 24 surface fully Automatic grinder
electro mag chuck 12 x 25"
more specs to come!
|
|
Ad # 9175 | 3 Axis Fully Automatic Surface Grinder |
80's |
Blohm |
Hannseat-11 |
Good |
sold |
Photo /
More Info. |
12 x 42 chuck-3 axis fully Automatic: 3 axis fully Automatic surface grinder
42 x 12 Electro mag chuck
stroke 48" max
14" x 2 wheel size
over the wheel dresser
coolant system
spark out cycle
Std> specs below-verify
TABLE CAPACITY...................: 12" x
42"
HEIGHT UNDER WHEEL...............: 14"
WHEEL............................: 12" x 2"
MAX
WHEEL MOTOR......................: 7.5 HP
EQUIPPED WITH:
CONTROL PANEL AND TRANSFORMER
ELECTRICS:
220/440 /3/60
Rigging / loading fee: $1000.00
|
|
Ad # 10019 | 3 Axis Fully Automatic Surface Grinder |
80's ? |
Boyar Schultz |
FSG1020AD |
Good |
sold |
Photo /
More Info. |
10 x 20:Boyar Schultz :auto downfeed: Boyar Shultz # FSG1020AD surface grinder w/ auto downfeed
20" x 10" chuck surface.
auto down feed
wheel size: 12" x 1" x 3"
electro mag chuck
books & schematics
|
|
Ad # 12232 | 3 Axis Fully Automatic Surface Grinder |
1984 ? |
Brown & Sharp |
6 x 18 |
Good |
sold |
Photo /
More Info. |
6" x 18": Brown & Sharpe
3 axis w/ auto downfeed
6" x 18"
hyd table feed
Electro mag Power Magnetic Chuck
220/3 Phase
2 HP motor
coolant tank
stepper motor type downfeed
very low hrs -less than 200hrs |
|
Ad # 6677 | 3 Axis Fully Automatic Surface Grinder |
1991 |
BROWN & SHARPE |
16" x 36" |
Excellent |
sold |
Photo /
More Info. |
16" x 36" Brown & Sharpe 3-axes CNC Surface Grinder: 16” x 36” BROWN & SHARPE Hi-tech 3-axes CNC
controlled Surface, profile and creep feed grinder
cnc grinder
Minimum table stroke .4”
Maximum grinding stoke 40”
Nominal grinding length 36”
Maximum grinding width 17”
Nominal grinding width 16”
Table size 16” x 36”
Max. work height Under 14” Dia. wheel 18”
Max. work height Under 16” Dia. wheel 16”
Wheel size 16” Dia. x 3” Width
Infinitely variable table speed range .4 to 100
IPM
Infinitely variable wheel speeds 100 to 3000 RPM
Max. reciprocation rate of table 200 S.P.M.
Continuous feed rate 0 to 225 IPM
Incremental feed, minimum .000010”
Incremental feed, maximum 1”
Vertical feed of wheel head 19 ¼”
Rapid traverse rate of wheel head 0 to 40 IPM
EQUIPPED WITH:
Ball screw drives for cross and wheel slides
14”x32” electromagnetic chuck w/ control
Dresser
Coolant filtration System
Coolant Splash enclosure
Wheel mount
Automatic lubrication
Integral cartridge type Spindle drive
15 H.P. DC Variable speed Spindle drive
Allen Bradley Series 9 CNC control with CRT, port
Note: machine has an x axis table movement needs
adjusting or work |
|
Ad # 6686 | 3 Axis Fully Automatic Surface Grinder |
1968 |
CAMUT |
TR3000M |
Good |
sold |
Photo /
More Info. |
31.5"x39.4"x144" CAMUT Hi-column hyd surface grinder, Model TR-2-3000M: 31.5" x 39.4" x 144" CAMUT Hi-column hydraulic
surface grinder with automatic downfeed, Model TR-
2-3000M
Table working surface 27.56" x 148"
Maximum table travel 145.7"
Maximum height table to new 22" dia. wheel 39.37"
Maximum height table to new 15" dia. wheel 42.91"
Wheel cross travel 31.5"
Maximum wheel size 22" dia. x 6"W x 8" hole
Variable table speeds 3.94-98 FPM
Automatic cross feed rates .12" to 3"
Automatic downfeed rates (10 steps) .0002"-.002"
Wheel speed 1152 RPM
EQUIPPED WITH:
Automatic downfeed of wheel (10 steps)
Full hydraulic operation
Automatic vertical downfeed may be programmed
with wheel cross reversal or table reversal
(single or double)
(3) 27 1/2" x 39 5/8" EMC electromagnetic chucks
in series with variable control
Head mounted hydraulic wheel dressing with 12"
stroke and variable control
Wheel arbor balancing stand
Rapid traverse to wheelhead
Marposs electronic sizing (vertical movement)
Auto. central lubrication system
Hardened Vee-type bed ways
(4) wheel mounts with grinding wheels
Way covers
EXL200 Casven coolant separator (1200 liter cap.)
15 H.P. Vichers dual delivery pump system
50 H.P. wheel drive motor |
|
Ad # 11457 | 3 Axis Fully Automatic Surface Grinder |
2008 |
Chevalier |
1640ADII |
Excellent |
sold |
Photo /
More Info. |
40" x 16" chuck: Chevalier FSG 1640ADII
TABLE SIZE.......................... 15- 3/4" X 39- 3/8"
MAX. GRINDING CAPACITY .................. 16" X 40"
MAX. LONGITUDINAL TABLE TRAVEL, HYDRAULIC .... 41- 5/16"
MAX. LONGITUDINAL TABLE TRAVEL, MANUAL ........ 43 -1/4"
MAX. CROSSFEED TRAVEL, AUTOMATIC ................... 16"
MAX. CROSSFEED TRAVEL, MANUAL ...................... 18"
DIST. FROM SPINDLE CENTER TO TABLE ............ 24-7/16"
VARIABLE TABLE SPEED, HYDRAULIC ......... 16' TO 82' FPM
AUTOMATIC CROSSFEED INCREMENT ........... 1/8" TO 1-1/4"
RAPID CROSSFEED SPEED ...................... 12" IPM
CROSSFEED HANDWHEEL, PER GRADUATION ............ 0.0025"
PER REVOLUTION ................................... 0.25"
MICROFEED, PER REVOLUTION .................0.0005"
PER GRADUATION ................................ 0.00005"
AUTOMATIC INCREMENTAL DOWNFEED ....... 0.00005" TO .002"
RAPID TRAVERSE RATE ....................... 25" IPM
SPINDLE MOTOR ..................................... 5 HP
STANDARD GRINDING WHEEL ............ 14"DIA. X 2"W X 5"B
APPROX. WEIGHT ............................... 7,710 LBS
APPROX. DIMENSIONS ................... 120" X 76" X 88"H
EQUIPPED WITH:
15.7" X 39.4" ELECTRO-MAGNETIC CHUCK
COOLANT SYSTEM WITH PAPER FILTRATION-auto feed,single filter
no magnetic seperator
manual balancer
manuals
tools
3/60/208-230-460 VOLT ELECTRICS
Very low hours 8-20 hrs on it |
|
Ad # 11513 | 3 Axis Fully Automatic Surface Grinder |
1997 |
Chevalier |
FSG1224AD |
Very Good |
sold |
Photo /
More Info. |
12 x 24 w/ incremental downfeed: Chevalier FSG1224 surface grinder
wheel dresser-over the wheel type included
inc down feed on wheel
coolant tank /paper filter sys
electro mag chuck 12 x 24
wheel size 14 x 2
all manuals
rigging/loading fee $1000.00
note can skate to door and load onto rollback at N/C
Std factory specs below-please verify
CHEVALIER AUTOMATIC SURFACE GRINDER MODEL # FSG-1224AD
TECHNICAL SPECIFICATIONS:
CURRENTLY WIRED FOR 220VAC , 3 PHASE , 60HZ
SPINDLE DRIVE RATING: 5 HP (3.7kW), 1750 RPM(60hz), 1450RPM(50hz)
TOTAL POWER RATING: APPROX. 7.4kW
STANDARD GRINDING WHEEL:WHEEL DIAMETER - 14" WIDTH - 2" BORE - 5"
TABLE SIZE - 11-3/4" x 23-5/8" (300mm x 600mm)
MAX. DISTANCE FROM TABLE SURFACE TO SPINDLE CENTERLINE - 24-3/4" (630mm)
STANDARD MAGNETIC CHUCK SIZE - 11-3/4" x 23-5/8" (300mm x 600mm)
AUTOMATIC LONGITUDINAL MOVEMENT- VARIABLE SPEED HYDRAULIC CYLINDER DRIVE
AUTOMATIC CROSS TRANSVERSE - VARIABLE SPEED DC MOTOR DRIVE
AUTOMATIC WHEELHEAD VERTICAL INFEED - SOLENOID DRIVEN
|
|
Ad # 10769 | 3 Axis Fully Automatic Surface Grinder |
|
Chevalier |
FSG-1223AD |
Excellent |
sold |
Photo /
More Info. |
12" x 24": Chevalier 12" x 24" Fully Auto Surface Grinder
Model FSG-1224AD, S# F178A006, 12" x 24" Capacity, 11 13/16" x 23 5/8" Kinetsu Electro Magnetic chuck model KET-3060A, 10" x 1.5" Grinding wheel, 19 3/4" Max distance from table to spindle center line, 0 - 24 Dial-in truing, Dial-in Hyd. parallel wheel dresser, Table rapid adj. in-out & head up-down, Auto & manual cross feed 0 to 4"/0.005" to 0.00005", Drive motor 5hp 208-220/460/575v 3ph, Hydraulic pump & tank overall dim. 31"W x 19"FB x 26"H, Coolant tank with filtering system & quick disconnect overall dim. 2' 2"W x 4' 8"FB x 30"H, Machine overall dim. 6' 5"W x 5'FB x 7'H, Est. Wt. 5,000 lbs
|
|
Ad # 12280 | 3 Axis Fully Automatic Surface Grinder |
|
Chevalier |
FSG-1224AD |
Good |
sold |
Photo /
More Info. |
12" x 24": Chevalier FSG 1224 AD
Table Size 300x600mm
(11 3/4"x23 5/8")
Max. Grinding Length (Longitudinal) 610mm (24") Max. Grinding width (Crosswise) 305mm (12") Max. Distance from Table Surface to Spindle Centerline 620mm (24 7/16 ")
Standard Magnetic Chuck Size 300x600mm (11 3/4"x23 5/8")
Longitudinal Movement of Table Longitudinal Travel, Hydraulic 650mm (25 5/8")
Max Travel (Manual) 700mm (27 1/2") Table speed, variable 5~25m/min (16~82fpm)
Cross Transverse Travel Rapid travel (Approx.) 60Hz/3.5m/min (12fpm), 50Hz/2.9m/min (10fpm)
Auto transverse increment 3~32mm (1/8-1 1/4")
Max.automatic travel 12" (305mm) 405mm (16")
Max. manual travel 350mm (13 3/4") 460mm (18")
Handwheel per revolution 6mm (0.25")
Handwheel per graduation 0.1mm (0.0025")
Micro feed per revolution 0.1mm (0.005")
per graduation 0.001mm (0.00005")
Wheelhead vertical infeed Auto infeed 0.001~0.04mm (0.00005" ~0.002")
Rapid travel (Approx.) 500mm/min (25 ipm)
Standard Grinding Drive Speed 60Hz/1750rpm,50Hz/1450rpm
Power Rating 5HP/4P
Standard Grinding Wheel Diameter 355mm (14")
Width 50mm (2")
Bore 127mm (5")
Weight Net Weight (Approx.) 2200kgs (4849lbs)
Rated power approx. 5.6kw (7.5HP)
|
|
Ad # 14709 | 3 Axis Fully Automatic Surface Grinder |
1997 |
Clausing |
CSG-1020ASD |
Excellent |
sold |
Photo /
More Info. |
10x20 Automatic surface grinder: CLAUSING Model CSG-1020ASD Precision Automatic
Surface Grinder with Stepping Motor for down feed,
and AC Motor for rapid up/down. Automatic down
feed function standard.
Specifications:
Table size..........................10" x 20"
Maximum grinding length.............20"
Maximum grinding width..............11"
Maximum distance from table surface to spindle
centerline
Standard column...................19 5/8"
Optional high column..............23 5/8"
Standard magnetic chuck size........10" x 20"
Longitudinal movement of table
Maximum travel, hydraulic.........22 3/4"
Maximum travel, manual............24 3/8"
Table speed, infinitely variable...........
60HZ,5-25M/Min.
50HZ,5-20M/Min.
Cross transverse travel
Auto transverse increment..........0.02"-0.5"
Maximum auto transverse travel.....10 5/8"
Maximum manual transverse travel...11 3/4"
Handwheel per revolution...........0.2"
Handwheel per graduation...........0.01"
Wheelhead vertical infeed
Automatic infeed...................0.00005"-
0.002"
Step feed (JOG)....................0.00005"
Rapid travel approximate...........5 7/8"/min
Slow travel approximate............1/8"/min
Handwheel per revolution...........0.05"
Handwheel per graduation...........0.0005"
Grinding spindle drive
Speed..............................60HZ/3450RPM
50HZ/2850RPM
Power rating.......................3 HP
Standard grinding wheel
Diameter...........................8"
Width..............................3/4", 1"
Bore...............................1 1/4"
Hydraulic motor, power rating........2HP x 6P
Crossfeed motor, power rating........80W
Elevating motor, power rating........80W
Total floor space required...........94 1/2" x
57"
x68 7/8"
Net weight (approximate).............3982 lbs.
Gross weight (approximate)...........4752 lbs.
Rated power (approximate)............5 1/5 HP
Packing dimensions(LxWxH)............84 1/4" 72
7/8" x 79 1/2"
Standard features:
Plunge and surface modes as standard
Vertical feed driven by stepping motor and AC
motor
Vertical jog feed: 0.00005"
Auto-downfeed increment: 0.00005"-0.002"
Maximum Auto-downfeed amount: 0.45"
Pre-set spark-out: 1-9 passes
The wheelhead is raised and the table parks upon
completion of the spark-out passes
Optional Accessories:
Electromagnetic chuck (10" x 20")
Coolant system with magnetic separator
Balancing stand
Spare wheel flange
Manual Dresser
Chuck control with demagnetizer |
|
Ad # 7270 | 3 Axis Fully Automatic Surface Grinder |
1973 |
ELB |
SW8VAII |
Very Good |
Sold |
Photo /
More Info. |
14” x 32” ELB Hydraulic Surface Grinder, Model SW8VAII: 14” x 32” ELB Hydraulic Surface Grinder, Model SW8VAII
Max. surface ground 14” x 32”
Max. distance, spindle center to top of table 24”
Table speed 3-90 F.P.M.
Automatic cross-feed to table with continuous
rapid traverse 47 I.P.M.
Automatic cross-feed to table, intermittent,
infinitely variable .04”-2.4” per stroke
Cross-feed hand wheel graduation .001”
Cross-fed fine adjustment .0005”
Rapid traverse rate, vertical 6 I.P.M.
Vertical feed hand wheel graduation .00005”
Automatic incremental down feed rate,
infinitely variable .0001”-.0025”
Grinding wheel size 11 ¾” dia. x 2” width x 3” bore
EQUIPPED WITH:
Electromechanically actuated incremental down-feed or grinding wheel hand
in pre-set increments at each saddle reversal for surface grinding or
at each table reversal for plunge, face and slot grinding. At conclusion
of down-feed cycle automatic return of grinding wheel hand and spark-out
of grinding wheel.
Motorized power rapid wheel hand positioning
Electric straight dressing with 2 speeds and auto. Diamond down-feed
Hydraulic table traverse with adjustable stops
Electro-mechanical cross feed ( accomplished by movement of the wheel head column)
with cross travel adjustment from front of machine
Hand wheels for manual operation
13 ¾” x 31 ½” Electro-magnetic chuck with Neutrofier control
(1)Wheel mounts
Grinding wheels
External coolant pump and tank with TORIT dust collector
6.7/8 H.P. 3/60/220 Volt spindle drive Motor and electrical controls |
|
Ad # 10889 | 3 Axis Fully Automatic Surface Grinder |
|
Gallmeyery & Livingston c |
550 |
Good |
sold |
Photo /
More Info. |
12 x 36 " w auto downfeed: 12 x 36 perm mag chuck-fine pole
over wheel dresser
14" wheel x 5" bore x 2" width
1750 rpm
coolant
manuals
vert feed 0.0001 (incremematic) feed
auto lube
includes transformer converts from 575/3 to 230/3 |
|
Ad # 7427 | 3 Axis Fully Automatic Surface Grinder |
1995 |
HZ |
64 - HTMW |
Very Good |
sold |
Photo /
More Info. |
24" x 16" Automatic srrface grinder: 1995 Used HZ - 64 HMTW Surface Grinding Machine with horizontal spindle and... |
|
Ad # 15488 | 3 Axis Fully Automatic Surface Grinder |
? |
Jakobsens/Meto-Fer |
SJ16 |
Good |
sold |
Photo /
More Info. |
10" x 30" fine pole chuck: Meto fur brand-Swiss built-3 axis hyd auto downfeed surface grinder
wheel size: 10" dia x 1.5"max
fine pole Magna Lock electromagnetic chuck 10X30 and controller
hydraulic overhead dresser
hand wheels in metric but has inch/metric DRO
No manuals
Coolant tank with paper filter system is with machine as well.
note:grinds with an excellent finish-recently replaced spindle bearing
2 axis DRO installed on Y & Z
Note: includes a few extra wheels and arbors |
|
Ad # 13278 | 3 Axis Fully Automatic Surface Grinder |
1990? |
Jones & Shipman |
1400X |
Good |
sold |
Photo /
More Info. |
8" x 24": Jones & Shipman
3 Axis Automatic Surface Grinder
Walker Electro Magnetic Chuck
8" X 24"
Coolent Pump
|
|
Ad # 12537 | 3 Axis Fully Automatic Surface Grinder |
|
Jones and shipman |
540 |
Good |
sold |
Photo /
More Info. |
6" x 18": Jones and Shipman Model 540
6" x 18"
Power X ,Y, Z
3400 RPM
Main spindle motor HP: ?
Voltage 220/ 3 Phase
no chuck!
|
|
Ad # 11767 | 3 Axis Fully Automatic Surface Grinder |
1980 |
Kanui |
HFS204 |
Good |
Sold |
Photo /
More Info. |
Kanui 8" x 18" : Kanui Type HFS204
3 Axis Fully Automatic Surface Grinder
Serial: 12071
Year: 1980
Travels 12" x 24" x 18"
8" x 18" Magnetic Chuck
Machine dials in metric no standard units. |
|
Ad # 6683 | 3 Axis Fully Automatic Surface Grinder |
1990 |
KIKINDA |
PRB-500/1500 |
Excellent |
sold |
Photo /
More Info. |
20" x 60" KIKINDA Hydraulic Surface Grinder: 20" x 60" KIKINDA Hydraulic Surface Grinder With Programmable
Incremental Down-feed, Model PRB-500/1500
Width x length ground (nominal capacity) 20" x 60"
Maximum table travel 63"
Maximum cross feed travel 22"
Maximum wheel head height adjustment 25"
Hydraulic table feeds up to 83 F.P.M.
Auto cross-feed increments 0 to 1" per table stroke
Wheel size 16" diameter x 2" wide x 5" bore
Auto incremental down-feed, programmable in 0.0001" to .001"
increments from
EQUIPPED WITH:
Hydraulic table traverse
Automatic cross feed
Programmable automatic incremental down-feed
Automatic wheel retraction and table park at completion of grind cycle
Digital display on control console for setting amount of stock to be removed per
grinding pass
Column mounted digital readout for display of wheel head position
Over-the-wheel dresser
20" x 60" Electromagnetic chuck with Neutrofier control
Coolant system with paper filtration
11 H.P. spindle drive motor |
|
Ad # 13171 | 3 Axis Fully Automatic Surface Grinder |
1990 |
Kikinda |
URB-1000-A |
Good |
sold |
Photo /
More Info. |
12" x 39" w/ auto downfeed: Kikinda Surface Grinder-3 axis grinder w/ auto
downfeed
Model URB-1000-A
12" x 39" Chuck
Wheel Size 14" x 2" Width Inside Bore 5"
Coolent
Spark Out/wheel Dresser
Magnetic Chuck is broken-needs elect repair |
|
Ad # 7729 | 3 Axis Fully Automatic Surface Grinder |
1993 |
Linear Abrasive |
Stag |
Excellent |
sold |
No Photo /
More Info. |
43 hp, 18" diameter grinding wheel: Grinding system is in excellent like new condition
Grind 60 Rc parts to plus/minus .0001” thickness and flatness
Produce a 16 rms finish single–pass with high production output
Variable speed (0-3000 rpm) 43 hp spindle drive
Coolant unit is 80 gpm 100 psi vacuum type with paper media
System utilizes CBN, Diamond or conventional abrasive 18” diameter wheels
Grinder has precision rare earth magnetic chuck with continuous feed
Grinder has less than 6,800 hours (typically, grinders like this with 30,000 to 35,000 hours are still producing precision parts in high volume production)
Control system is simple to operate by limited experience operator
Process allows automatic parts loading, unload, feed to washer, or to next operation
System is easy to maintain and troubleshoot
System was disassembled, inspected, and up-dated 400 hours ago. System is ready to ship now. |
|
Ad # 2750 | 3 Axis Fully Automatic Surface Grinder |
|
Maegerle Bros. Limited |
F-7-R |
Good |
Sold |
Photo /
More Info. |
3 Axis Hydraulic Surface Grinder: 3 Axis
10 x 30
Includes permanent magnetic chuck 10 x 24
Standard pole
Uses 12" diameter wheel
Over the head wheel dresser
Work light |
|
Ad # 15179 | 3 Axis Fully Automatic Surface Grinder |
1978 |
Mattison |
|
Good |
sold |
Photo /
More Info. |
20 x 48: Mattison Surface Grinder
OEM - Mattison Machine Works, Rockford, IL
Serial Number - 23866
Electro-Magnetic Chuck - 20" x 48" x 5-1/2"
Table (3) T-Slot, Longitudinal Movement by
Hand and
Power
Working Surface: 20" x 53-1/2"
Longitudinal Movement of Table: 48"
Power Speed Adjustable: 30 to 100 fpm
Grinding Wheel Assembly:
Transverse Movement Wheel Slide - 24"
Vertical Slide Movement - 25"
Incremental Down-Feed
Centerline of Spindle to Top of Table - 35-
1/4" / Top of
Chuck - 30"
Grinding Wheel: 20" x 3" x 5"
Motor Drives:
Spindle - 15 HP
Hydraulic Pumps - 7-1/2 HP
Feed - 1-1/2 HP
Coolant Pump - 1 HP Controls: On/Off and
Reset
Buttons for all functions,
including feeds and speeds.
Equipped with (1) Stone Dresser, Hydraulic /
Coolant
Pump and Reservoir / Wheel Load Meter
Complete Factory Safety Guards
Electrics - 460/3 Phase/60 Hz
Control Voltage - 120
Total Horsepower - 24.5
O/A Dimensions - 14.5' x 8' x 10' Tall
See attached pictures for Serial Number and
Electrical
Specification plates.
Machine has been reconditioned, hence the
machine
wrapping.
The chuck is protected with lube/oil and is
covered with plastic film.
The entire machine is in excellent, like-new
condition.
From my research, Bourn-Koch, Inc. supplies
Mattison
parts and all the original hydraulic and
electrical
schematics for this machine in addition to
the
operations and parts manuals:
http://www.bourn-
koch.com/home/cnc_machine_parts/mattison_mattis
o
n_hanchett_18.html
This machine is available for inspection;
machine NOT under power
Quoted fob Seller's yard; loading fee may
apply
Buyer responsible for freight and logistics
Buyer to verify all specifications and
options of equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment.
The goods are sold in an "As Is, Where Is"
condition.
The seller warrants that the goods are free
and clear of all liens, indebtedness, or
liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 10906 | 3 Axis Fully Automatic Surface Grinder |
|
Mattison |
73 x 24" |
Good |
sold |
Photo /
More Info. |
73" x 24" chuck: 3 axis fully automatic w/ downfeed
73" x 24" electro magnet chuck
25HP
over wheel dresser
coolant, magnetic seperator system
travaltrol roll dresser system
wheel size: 5.5" wide w 12" dia hole x 16"? dia
fine feeds on cross & traverse |
|
Ad # 9239 | 3 Axis Fully Automatic Surface Grinder |
90's |
Max |
2550CNC |
Good |
sold |
Photo /
More Info. |
cnc 10 x 20 : 10 x 20 table
siemens control
coolant filter sys
10" x 2 wheel size
auto dresser |
|
Ad # 12346 | 3 Axis Fully Automatic Surface Grinder |
1999 |
Mitsui |
818 HMD |
Excellent |
sold |
Photo /
More Info. |
8" x 18": Mitsui High-Tech Hydraulic Surface Grinder
Model 818HMD
8" x 18" Walker hydraulic chuck
Incremental down feed
Very low hours
Very nice condition |
|
Ad # 14438 | 3 Axis Fully Automatic Surface Grinder |
80's |
NICCO |
NSG-6H |
Needs Work |
sold |
Photo /
More Info. |
990 lbs.: MACHINE COMES WITH BRAND NEW GRIND WHEEL
WIDTH & LENGTH GROUND: 12" X 24"
LONGITUDINAL TABLE TRAVEL: 27"
CROSSFEED TRAVEL: 13"
GRINDING WHEEL SIZE: 12" X 1.5" X 3"
DISTANCE, SPINDLE CENTER TO TABLE TOP
(MAX.):
20"
MAX. VERTICAL TRAVEL OF SPINDLE: 16"
LONGITUDINAL TABLE SPEEDS: 3' TO 82' FPM
GRINDING WHEEL SIZE: 12" X 1.5" X 3"
***MACHINE IS CURRENTLY IN NEED OF MINOR
REPAIR***
- pump and pump motor is in need of repair
(a
challenge only if
dry grinding)
- handle missing from left-most turning
turret
on main part of
machine
- connection from interface to relay has
shorted
out |
|
Ad # 13335 | 3 Axis Fully Automatic Surface Grinder |
70s? |
Nicco Machine |
NSG 74s |
Good |
sold |
Photo /
More Info. |
16" x 24": Nicco Machine Surface Grinder:16" x 24"
Power X Y Z-auto downfeed
Wheel Dresser
16" x 24" Magnetic Chuck
|
|
Ad # 10252 | 3 Axis Fully Automatic Surface Grinder |
1984 |
norton/elb |
12 x 24 |
Very Good |
sold |
Photo /
More Info. |
12 x 24 full automatic: coolant
new spindle
electric chuck
built in overhead dresser
x&y stepdown w/ micrometer
auto downfeed
rapid traverse |
|
Ad # 14789 | 3 Axis Fully Automatic Surface Grinder |
1992 |
Okamoto |
ACC 12.24DX |
Good |
sold |
Photo /
More Info. |
12 x 24": 1992 Okamoto ACC12.24DX Fully Automatic surface
grinder
includes: coolant system w/ magnetic
seperator
fine pole 12 x 24" walker chuck
over wheel dresser
wheel size: 12 x 2" max
spindle speed: 6500 rpm max
Borazon wheel in spindle
coolant tank
Std mfg specs below-please verify actual
machines
Specification Description
Table Working Surface 12" x 24"
Max Chuck Size 12" X 24"
Max Table Movement (Manual) 29.5"
Spindle Drive 5 HP
Max Distance Wheel to Table 13.6"
Max Table Load (Including Chuck) 925 Lbs.
Max Wheel Size 14" Diameter (12"
x 1.5" x 1"
STD)
Wheel Speed 1,800 RPM
Longitudinal
Feed Rate 3 - 82 FPM
Rapid Wheelhead Feed Rate 40 IPM
Wheelhead
Downfeed Increments .0005" -
.0015"
Automatic Grinding Feedrate .010
- 40 Feet Per Minute |
|
Ad # 12536 | 3 Axis Fully Automatic Surface Grinder |
|
Okamoto |
6-18DX |
Good |
sold |
Photo /
More Info. |
6" x 18" automatic grinder: Okamoto 6-18DX fully automatic surface grinder
Maximum grinding area (L x W): 18"x6½; Maximum weight of work piece: 264 lbs.;
Surface length: 20";
Surface Width: 6";
Maximum longitudinal travel: 20.9";
Maximum cross travel: 6.9";
T-slot (Qty. x width): 1x0.669;
Longitudinal movement of table; Hydraulic feed: 0.33-66.67 ft/min; Hand feed per revolution cross movement of saddle intermittent feed: 0.002-0.1;
Continuous feed: 3-8 in/min;
no coolant system
Voltage: 230/460v; Phase 3; Cycle 60;
Spindle: 1hp/2p;
Hydraulic pump: 1hp/2p;
Vertical feed: .5hp;
L x W x H: 77x52x80";
Weight: 2640 lbs.;
Equipped with: 6x12 perm magnetic Chuck, , wheel hub /puller,manuals, transformer 220/3
|
|
Ad # 14537 | 3 Axis Fully Automatic Surface Grinder |
1990 |
Okamoto |
ACC-124DX |
|
sold |
Photo /
More Info. |
12 x 24" fine pole electro mag. chuck: 1990 Okamoto ACC-124DX automatic surface grinder
12 x 24" fine pole electro mag. chuck
Specification Description-please below verify std specs
WHEEL SIZE 12" X 2" X 5"
MAXIMUM HEIGHT UNDER 12" WHEEL 13.7"
TABLE SPEEDS- INFINITELY VARIABLE 0- 82 FPM
MAX. LONGITUDINAL TABLE MOVEMENT MANUAL 30"
AUTO CROSS FEED INCREMENT 0.002" - 0.80"
AUTO CONTINOUS CROSS FEED 4-40 FPM
CROSS FEED, MANUAL, HAND FEED PER REV. 0.25
GRADUATION OF HAND WHEEL 0.001"
MAXIMUM CROSS FEED, MANUAL 1.4"
AUTO INCREMENTAL DOWN FEED INCREMENTS 0.00005" - 0.0015"
POWER RAPID WHEEL POSITIONING RATE 16 IPM
SPINDLE MOTOR 5 HP
FLOOR SPACE 108" X 76"
WEIGHT 5,300 LBS.
Equipped With:
SERVO-DRIVEN DOWN FEED WITH MPG HANDWHEEL
AUTO INCREMENTAL DOWN FEED FOR BOTH SURFACE AND PLUNGE OPERATIONS
DUAL RATE AUTO DOWN FEED WITH COARSE AND FINE SELECTIONS
DIGITAL DISPLAY FOR VERTICAL AXIS AND CROSS FEED
AUTO TABLE PARK AT COMPLETION OF GRIND CYCLE AND SPARKOUT PASSES
ELECTRONIC HANDWHEEL FOR MANUAL VERTICAL MOVEMENT WITH EACH GRADUATION EQUIVALENT TO 0.00001 IN., OR 0.001 IN.
POWER RAPID WHEEL POSITIONING
HYDRAULIC TABLE TRAVERSE
12 IN. X 24 IN. ELECTR-MAGNETIC CHUCK (fine pole)
VARIABLE HOLD NEUTRIFIER CONTROL AND DEMAGNETIZER-BUILT- IN
COOLANT SYSTEM-
|
|
Ad # 14327 | 3 Axis Fully Automatic Surface Grinder |
2004 |
Okamoto |
12-24 |
Excellent |
sold |
Photo /
More Info. |
12 X 24: Okamoto 1224DX automatic surface grinder
12 x 24 chuck
wheel size: 12" x 1.5" x 5"
Maximum Distance between Wheel & Table 13.6"
MAX. LongtudinalL Table Movement, Manual 30". Auto Crossfeed Increment 0.002" TO .80".
Auto Continuous Crossfeed 4' to 40' FPM. Crossfeed, Manual, Hand Feed Per Rev. 0.25". Grad. of Handwheel 0.001". MAX.
Crossfeed, Manual 14".
Auto Incremental Downfeed 0.00005" TO .0015". Power Rapid Wheel Positioning Rate 16" IPM
includes:coolant w/magnetic seperator system,over wheel dresser
rigging/loading fee onto flat bed: $900.00 |
|
Ad # 14770 | 3 Axis Fully Automatic Surface Grinder |
? |
Okamoto |
ACC 6 x 18DX |
Good |
sold |
Photo /
More Info. |
6 x 18"-fully auto w/ downfeed: Okamoto ACC 6 x 18 DX Surface Grinder
fully automatic w/ downfeed
std. factory Specifications:please
verify actual machine
Table Working Surface.....6" x 20"
Maximum Table Movement...20.8" x 6.9"
Maximum Distance Between Wheel &
Table...........11.7"
Magnetic Chuck size..6"x18" x 2.36"
Table Load Capacity Including
chuck...264
LBS.
Grinding Wheel Size.....8" x 1" x 1.25"
Wheel Speed..........3,480 RPM
Grinding Wheel Spindle.......2HP
Equipped With:
Hydraulic Table Feed
Auto Crossfeed
Auto Downfeed
Hand Scraped Double "V" Ways
Gravity Fed Lubrication System
Standard Chuck Size
6" x 18"
Max. Dist. Top Table-Under 8" Dia.
Wheel
11.7"
Max. Weight on Table
264 lbs.
Grinding Wheel
Wheel Size (ODxWxID)
8" x (0.25" ~ 1") x 1.25"
Motors
Grinding Wheel Spindle
2 HP
Vertical Feed
0.5 HP AC Servo
Cross Feed
1 HP
Hydraulic Pump
1 HP
Floor Space
77.2" x 51.2" x 78.5"
Weight
2,420 lbs. |
|
Ad # 16003 | 3 Axis Fully Automatic Surface Grinder |
unknown |
Okamoto |
Accugar 124n |
Excellent |
sold |
Photo /
More Info. |
12 x 24: Offered for sale is an Okamoto fully automatic
surface grinder with Extremely low hours.
Here is the story on this machine. After
opening my shop, I watched this grinder as it
sat in a machinery boneyard warehouse and
collected pigeon droppings for nearly 10 years.
At a certain point I thought I needed a grinder
this big, so bought it, hauled it to the shop,
completely disassembled it, and called in the
machinery scrapers because I was Absolutely
certain that the grinder needed a complete
overhaul. I hadn't run it yet, and Boy was I
WRONG. The scraper checked it all out and
asked me why in the world I called them in. It
needed nothing, not even a tuneup. So it got a
coat of epoxy paint and was set up in the shop.
It actually got used a couple of times over the
years. I am basically a one man shop.
The main control board went out at one point
and the repair shop didn't think they could fix
it, so I bought a new one from Okamoto. Old
one got fixed, went back in, and has been there
ever since. New one has not been out of the
box and is included in the sale
The grinder has over the wheel dresser, coolant
tank and pump, automatic magnetic chuck, a copy
of the original manual, lots of extra grinding
wheels, automatic incremental downfeed, and a
12 inch squeegee (not pictured, but it is like
new)
The grinder is currently under power and
available for inspection. I am not able to
load as my forklift is not big enough, but I
can arrange for a rigger to load for a
reasonable fee.
|
|
Ad # 10494 | 3 Axis Fully Automatic Surface Grinder |
1973 |
Okamoto |
618 |
Very Good |
sold |
Photo /
More Info. |
Okamoto Model 6x18, Surface Grinder, Auto Feed, Magnetic Chuck : OKAMOTO SURFACE GRINDER
MODEL #618 AUTO S/N 6835 NEW: 1973
***AUTO FEED***
Table size 6" x 12"
Longitudinal Travel 18"
Cross Travel 6"
Max. Distance from Table to Spindle Center 11"
Max. Grinding Wheel Dim. 8"x1"
Spindle Speed 2400RPM
*Auto Feed
*Filtration System
*Magnetic Chuck
|
|
Ad # 11478 | 3 Axis Fully Automatic Surface Grinder |
1994 |
Okamoto |
ACC-6-18 DX3 |
Very Good |
sold |
Photo /
More Info. |
6 x 18: 3 axis w auto downfeed: Okamoto 6 x 18 W/ auto downfeed-surface grinder
Maximum grinding area (L x W): 18"x6½; Maximum weight of work piece: 264 lbs.;
Surface length: 20"; Surface Width: 6";
Maximum longitudinal travel: 20.9"; Maximum cross travel: 6.9"; T-slot (Qty. x width): 1x0.669; Longitudinal movement of table; Hydraulic feed: 0.33-66.67 ft/min; Hand feed per revolution cross movement of saddle intermittent feed: 0.002-0.1; Continuous feed: 3-8 in/min; Voltage: 230/460v; Phase 3; Cycle 60; Spindle: 1hp/2p; Hydraulic pump: 1hp/2p; Vertical feed: .5hp; L x W x H: 77x52x80"; Weight: 2640 lbs.;
Equipped with: 618 Electro Magnetic Chuck, , wheel hub /puller,manuals, transformer 220/3 |
|
Ad # 12883 | 3 Axis Fully Automatic Surface Grinder |
|
Okamoto |
DX 6-18 |
Good |
sold |
Photo /
More Info. |
6" x 18"-3 axis fully auto: Okamoto ACC - 618DX3
auto downfeed
6" x 18" Chuck
Power X, Y ,Z
|
|
Ad # 14828 | 3 Axis Fully Automatic Surface Grinder |
1989? |
Okamoto |
AC124N |
Good |
sold |
Photo /
More Info. |
12" x 24": 1989? Okamoto # AC-124N Automatic surface grinder
12 x 24" std. electro magnetic schuck
coolant system
wheel size: 1-1/2" x 25 x 5" hole;max width 2"
manual included
Std: mfg specs please verify actual machine
below..
Motor Driven with 5 HP, 3-Phase, 60 cycle,
230/460 Volt Grinding Spindle Drive. 2 HP
Hydraulic Power Suppy Unit. AC Motor for
Downfeed.
MD Lubrication.
EQUIPPED WITH:
12″ x 24″ Walker Fine Line Electro Magnetic
Chuck
and Controls.
Incremental (Automatic) Down Feed
Hydraulic Power Longitudinal and Cross Feeds
Power Rapid Wheelhead Elevation.
Cross Feed Control
Table Speed Control
Step Feed Control.
SPECIFICATIONS:
Working Surface of Chuck 12″ X 24″
Maximum Grinding Length 24″
Maximum Grinding Width 12″
Max. Dist. Under 12″ Wheel 13.7″
Wheel to Table Top
Maximum Longitudinal Travel of Table
29.5″
Maximum Cross Travel of Table 13.6″
Surface Length of Pad 30″
Surface Width of Pad 11.8″
T-Slot(No. x Width) of Table Feeds 3″ x .669″
LONGITUDINAL MOVEMENT OF TABLE
Hydraulic Feed Per Revolution 1 – 100 FPM
Hand Feed per Revolution 1.85″
CROSS MOVEMENT OF TABLE
Hydraulic Intermittent Feed 0.02″ – 0.8″
Hydraulic Continuous Feed Per Minute 4 – 40
IPM
Hand Feed Per Revolution .25″
Graduation of Handwheel .002″
VERTICAL MOVEMENT OF WHEEL HEAD
Automatic Feed Per Table Stroke (OPT) 0.001 –
015″
Automatic Feed Per Table Reversal 0.001 –
.015″
Graduation of Handwheel .0002″
Hand Feed Per Revolution 0.05″
Vertical Rapid Feed 19 IPM
GRINDING WHEEL (Standard)
OD x Width x ID 12″ X 1.5″ X 5″
Spindle Revolution (60Hz) 1800
Floor Space 78″ X 72″ X 68″
Approximate Weight 4,900 Lbs.
|
|
Ad # 10494 | 3 Axis Fully Automatic Surface Grinder |
1973 |
Okamoto |
618 |
Very Good |
sold |
Photo /
More Info. |
Okamoto Model 6x18, Surface Grinder, Auto Feed, Magnetic Chuck : OKAMOTO SURFACE GRINDER
MODEL #618 AUTO S/N 6835 NEW: 1973
***AUTO FEED***
Table size 6" x 12"
Longitudinal Travel 18"
Cross Travel 6"
Max. Distance from Table to Spindle Center 11"
Max. Grinding Wheel Dim. 8"x1"
Spindle Speed 2400RPM
*Auto Feed
*Filtration System
*Magnetic Chuck
|
|
Ad # 12949 | 3 Axis Fully Automatic Surface Grinder |
2004 |
Sharp |
SG820-3A |
Good |
sold |
Photo /
More Info. |
20" x 8" hyd. w/ programmable down feed: Sharp SG820-3A w/auto prog. downfeed
8 x 20 electro mag chuck
Max Peripherial Speed of Wheel 6560SFM
Electro magnetic std pole chuck
Table/chuck Size-20"x8"
Controler- 1 Axis NC System ST-1
Electrical:220-3 Phase -60 HZ
3 Horsepower
paper filter coolant system
specs bebelow:
Advanced Numerical Control system for spindle downfeed allows easy datas input for stock removal and feed selections
Auto grinding cycles can be set for regular traverse or plunge grinding, with spindle downfeed on either side of the table
Downfeed consists of coarse feed, fine feed and 0-9 spark out passes
Auto return feature will either notify the user and prepare for the next part or return the table and spindle to a preset position and shut the machine down
Base, column, table and saddle castings made from Meehanite for strength and rigidity
Turcite coated double V ways on the saddle are hand scraped
Turcite coated flat and V way for the table are hand scraped
Cartridge type spindle with high precision AEBC 7 bearings
Saddle locking system for accurate slot grinding
Precision cross feed ballscrew
Working surface - 8 x 20"
Approx. floor space - 83L x 59W x 78"H
Standard Accessories:
Advanced NC downfeed system
Kanetsu Electro-magnetic chuck with control
Coolant system (approx. 25 gal) with paper filter and splash guards
Automatic lubrication system
Hydraulic system with independent tank for vibration free table movement
Hydraulic table stroke setting
Grinding wheel and wheel flange
Work light
Specifications: SG820-3A
Chuck size W x L 8 x 20"
Max. from spindle(center) to table top 15.7"
Max. longitudinal travel 23.6"
Max. cross travel 9.25"
Hydraulic feed 3.3-82 fpm
Handfeed per revolution 0.2"
Continuous traverse feed 0.006-0.4"
Grad. of handwheel 0.0005"
Rapid feed 47 ipm
Feed rate 0.00004-0.004"
Max. total down feed amt.in 1 setting 9.99"
Spark out 0-9 passes
Spindle drive motor 2 HP
Wheel diameter 8"
Wheel width 0.875"
Wheel bore 1-1/4"
Hydraulic motor 1 HP
Weight (approx.) 2,640 lbs
machine list price new: $27,150.00 |
|
Ad # 9192 | 3 Axis Fully Automatic Surface Grinder |
85? |
Star/ELB |
11 |
Fair |
sold |
Photo /
More Info. |
10x20 w/12" wheel-auto downfeed: Automatic and manual (handwheel) verticle infeed,
verticle rapid feed,
magnet 10x20, 12" wheel, manual.
coolant w/ mag seperator
machine ran fine when taken out of service |
|
Ad # 12733 | 3 Axis Fully Automatic Surface Grinder |
|
Sunmax |
If-1020AHD |
Good |
sold |
Photo /
More Info. |
10" x 20" x 12": Sumax Suface Grinder |
|
Ad # 10143 | 3 Axis Fully Automatic Surface Grinder |
2007 |
Supertec |
1632CII |
Excellent |
sold |
Photo /
More Info. |
16 x 32 table-full 3 axis downfeed: 2007 Supertec 1632CII
16 x 32 table-full 3 axis w/downfeed
16 x 32 table
Sony DRO (X and Y).
Magnetic and Paper coolant filtration
Kenetsu Magnetic Chuck Model #KET4080K. |
|
Ad # 13655 | 3 Axis Fully Automatic Surface Grinder |
1970's |
Thompson |
DF C2 |
Good |
sold |
Photo /
More Info. |
24" x 96"-fully automatic: Thompson Surface Grinder
3-Axis downfeed
Panasonic PLC Control
24" x 96" electro magnetic-powered
chuck-
Neutrofier ll std pole spacing
Main spindle motor : 35HP
Volt: 220-440/3 phase
Diamond Wheel Dresser
20" wheel x 3" wide
20" height under grinding wheel
max
Note:Auto downfeed /inc downfeed
needs
some
minor repair, but will move manually
0.0005
downfeed increment
Refurbished 1996-electrically &
Mechanically,
ways were scraped in then,ways look
very
good!
will hold 0.001 across chuck or
better
rigging/loading:$2500.00 |
|
Ad # 10772 | 3 Axis Fully Automatic Surface Grinder |
1988 |
Victor |
1224 |
Fair |
SOLD |
No Photo /
More Info. |
12x24: |
|
Ad # 10250 | 3 Axis Fully Automatic Surface Grinder |
1999 |
Victor |
1020AH |
Good |
Sold |
Photo /
More Info. |
10 x 20 : 3 axis fully auto surface grinder: 1020AH grinder-3 axis fully automatic
2HP
10 x 20 electro mag std pole chuck
over wheel dresser |
|