| Year:
| 2011
|
| Make:
| Cosen
|
| Model:
| C-320NC
|
| Condition:
| Good
|
| Serial #:
| On Request
|
|
| Machine Status: | Can be powered up
|
| Shipping Info: | We can load
|
| Weight: | 5000
|
| Dimension: L x W x H | 79" x 79" x 59" |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$sold USD
|
|
| General Description |
- 2011 Cosen horizontal fully Automatic Shuttle feed
band saw #C-320NC
std. mfg quote below,please verify actual
machine
Fully Programmable
Dual Column
Automatic Bansaw
Cosen's C-320NC, incorporates a 5 hp
powerful blade motor, 1 1/4” wide blade,
independentcontrol panel, and heavy-duty dual
column design.
These features create a very rigid,
dynamically stable and productive machine. The
oversized precision ground columns ensure smooth
saw frame movement and the consistently stable
cutting force required throughout the cutting
cycle, thereby increasing the cutting efficiency
and extending blade life.
Cosen now offers the latest in Touch Screen
Control Technology, SNC-100. Coupled with a
Mitsubishi PLC controller the 5.7” Color
Touch Screen allows for fast easy programming of
any job. Utilizing the SNC-100 System the operator
easily programs the cut length and quantity
desired. The SNC-100 System stores up to 99
cutting jobs and features
Automatic Kerf Compensation for parts longer
than a single index. The SNC-100 System also
utilizes “Save-A-Blade” which retracts the
material 1/8” from the blade at the end of
each cut so the blade will not rub the material
while the saw head moves up to allow the next
index. All machine functions are controlled from
the operator’s station.
MACHINE SPECIFICATIONS
Maximum Cutting Capacity:
Round:12.6"
Square:12.6 x 12.6"
Rectangle (w x h):15" x 12.6"
Bundle (w/ optional. top clamps)
max.dia:O 12.6"
max.rectangle :15" x 12.6”
max: 6 3/8" x 12”
min: 2.5” x 7 3/8”
Blade: Speed – Inverter Driven:66 – 328 fpm
(high range) 49 – 246 fpm (low range)
Size:1 ¼" x 13'11" x .042"
Guides:Carbide
Motor: 5 HP
Hydraulic:1 HP
Coolant:1/8 HP
Automatic Material FeedSystem:
Job Storage:up to 99 jobs
Single Index Stroke:0" to 16"
Multiple Stroke Indexing:Up to 99 jobs
0" to 650" (featuring automatic kerf
compensation)
Weight 4,990 lbs.
MACHINE FEATURES
Machine Structure:
► Oversized Precision ground, large Dual
Columns support and guide the rugged saw head
through the entire cutting cycle. The saw head
adopts a back tilt design which allows the blade
to twist less than traditional bandsaws between
the wheel and blade guide; thereby putting less
stress on the blade, insuringlonger life.
► The oversized round columns provide hundreds
of square inches of continuous surface contact
with the sawhead throughout the entire
cutting process.
► Cross Link is located on the top of the
columns, connecting the two columns to form
an archway design that gives it sound structural
strength.
► Hydraulic shuttle vise assembly, made of
heavy-duty cast iron with replaceable hardened
wear plates, rides on two large guide shafts
that are capable of handling extreme loads.
Both shafts are ground and chrome plated for
durability and smooth material feeding.
Blade Drive:
► The gearbox is specially designed to
accept high lateral pressure. Unlike conventional
gearboxes, the Cosen design accepts more
pressure during operation and will not create
thermal distortion, providing long gearbox
life under production conditions.
► Inverter blade drive system allows
infinitely variable blade speeds to be
controlled by the
operator from the control panel with turn of
a knob. The system comes standard with
LED readout for convenient and accurate
setting of blade speed.
Blade Guidance & Lubrication System:
► Carbide guides securely guide the blade
during the cutting cycle. The carbide is
relieved so that coolant can both cool and
lubricate the blade during the cut.
► The bearing guides eliminate blade stress
by pre-aligning the blade before it enters the
carbide guides. Two additional guides
located on a central axis support the blade from
the top, giving it extra penetrating force
forfaster cuts.
► Automatic hydraulic blade tensioning
device provides correct blade tensioning when the
machine is turned on and will slightly
release the tension when the machine is not
running. This extends blade life. The on-off
hydraulic valve switch is an added feature
making blade change quicker and easier
► Integral coolant system. Coolant is
supplied at four critical points: exit & entry of
blade through blade guides, middle of cut via
adjustable flex hose, and blade cleaning
brush. Synchronized power driven blade brush
effectively cleans chips from blade to extend
blade life.
Control & Automation:
► The operator’s control station
ergonomically located on the front side of the saw
is convenient and user friendly. All operator
controls are positioned on the top of the control
box and clearly labeled for ease of operation.
The electrical components are located inside
the control box with the main lockout
disconnect on the front of the control box for
safety and maint.
Smart NC-100 (SNC100) technology provides
most of the benefits of NC controlled saws at a
mere fraction of the cost. SNC100 controls are
programmable up to 99 different jobs including
quantity and length of cut. The
control automatically compensates for Kerf
loss after data input and requires no manual
calculation of number of times to index. The
control also automatically shutdowns the
machine, blade motor, and hydraulics, once the
programmed number of cuts or out of stock
situation has been achieved. The system
includes an error feedback function enabling
rapid troubleshooting through an error code to be
displayed in the event of a malfunction.
► SNC-100 Features include:
· 5.7” Touch screen
· Mitsubishi PLC controller
· 99 individual jobs can be programmed and
stored· Stored program(s) may be easily
recalled and executed at Will.
· Blade Speed Display
· Motor amp draw (optional)
· Optional Blade Deviation Detection monitor
can be controlled directly from Touch Screen
· Automatic Kerf Loss Compensation &
Automatic Multiple Indexing up to 650”
· Save-a-Blade Feature - The shuttle vise
will automatically retract the material slightly
after cut-off, so a blade can avoid the
undesirable abrasion with material,
improving cutting tool life.
· Error Code Display Provides simplified
self-diagnostics.
· Blade life timer.
► Precision feed pressure & feed rate dual
valve system for optimal cutting performance in
any material.
Selector Switch for bundle or single cutting
modes
► Automatic work height sensor and air gap
eliminator positions the saw frame to a safe
clearance above the work piece, so that the
next piece can be positioned without damaging
the blade. After feeding, the saw head
will descend quickly to within approximately
1/8" of work piece, where it proceeds at the
predetermined cutting rates.
Material Clamping & Feeding:
► Split vise jaws on the front machine vise
are standard. The split front vise will hold the
work piece on both sides of the blade for a
burr-free cut. This system also features
automatic feeding of material down to a
remnant length of 2".
► Hydraulic front and rear vises enable
clamping and unclamping of any material from
the operator’s control station.
► Ductile cast iron vise with replaceable
hardened wear plates.
► Smart NC Controlled Multiple indexing for
long cutting lengths of up to 650” maximum
length, utilizing full shuttle length every
index until desired length is reached.
One set of vertical alignment rollers, which
is convenient for bundle cutting and
positioning bar stock, is standard and is
located on the machine base.
Multiple horizontal rollers located on the
entry side of the saw to facilitate smooth
material feeding.
Discharge Table with built–in coolant return
adequately supports cut-off stock and
provides coolant savings in the long run.
Proximity switches sense both blade slippage
and blade breakage and will automatically shut off
the machine if either of these conditions should
occur.
► All blade covers, and guarding on the saw
are painted Alert Orange to increase safety
alertness.
All exposed electric wiring and hydraulic
circuit are protected by conduits.
|
| Electrical Description |
|
|
|
