New and Used: Cold Saws, Band Saws & Abrasive Saws

You are viewing a list of sold machinery in the NetMachinery Sold Archive. If you are looking for available machinery click View Machinery for sale

Home > Sold Machinery Archive > Sawing Equipment > Tilt Frame Vertical Band Saw

We found 18 matching ads. Now displaying the remaining 18 ads.

(Tip: Click on the column headers to sort your results by that criteria)

Year	Make	Model	Condition	Price	Details

Ad # 5578		Tilt Frame Vertical Band Saw		Ad to Checklist
60's	Marvel	Mark 8: # 8YM8/M3	Good	sold	Photo / More Info.
Marvel tilt frame vertical band saw: 18" throat tilt frame 0-45 deg L & R 1" blade width heavy cast base

Ad # 10944		Tilt Frame Vertical Band Saw		Ad to Checklist
—	Marvel	8-M4	Good	sold	Photo / More Info.
—: runs good tilts 45deg. either direction 18" throat 1" blade

Ad # 6965		Tilt Frame Vertical Band Saw		Ad to Checklist
1989??	Do-All	TF-1421H	Good	Sold	Photo / More Info.
14in x 21in Rectangle cap:Tilt frame mitre cutting: 14" Throat 14depth x 22Height Tilt frame-mitre cutting Hydraulic tilt & speed control variable 36" x 26" table Hyd. vise W/ pressure regulator control 171" blade length x 1" wide flood coolant work light 5 HP hyd. drive unit No conveyor included

Ad # 5481		Tilt Frame Vertical Band Saw		Ad to Checklist
1982	ARMSTRONG BLUM/ MARVEL	81A9/M4A	Good	Sold	Photo / More Info.
18" X 20" ARMSTRONG BLUM "MARVEL" AUTOMATIC VERTICAL BAND SAW: CAPACITY ------------------ 18" WIDE X 20" HIGH 45 DEG. ANGLE LEFT -------- 18" X 11-1/2" 45 DEG. ANGLE RIGHT ------- 18" X 13-1/2" BLADE SIZE ---------------- 15'6" X 1-1/4" X .042" WORKING SURFACE OF TABLE -- 30" X 33" VISE OPENS MAXIMUM -------- 21-1/2" STANDARD BLADE SPEED VARIABLE ----- 60 TO 400 FPM SHUTTLE TRAVEL OF FEED TABLE AT ONE SETTING - 24" MAIN DRIVE MOTOR --------------- 10 HP A.C. EQUIPPED WITH --- 10' AUTOMATIC INFEED TABLE WITH VISES MULTI CYCLE UP TO 19 CYCLES COOLANT SYSTEM PIECE COUNTER HYDRAULIC VISES

Ad # 6940		Tilt Frame Vertical Band Saw		Ad to Checklist
1995	MARVEL	81A11PC	Very Good	Sold	Photo / More Info.
MARVEL MODEL 81A11PC VERTICAL BAND SAW: MARVEL MODEL 81A11PC VERTICAL BAND SAW Capacities: 18" x 20" (Maximum @ 90 Degrees) 18" x 11-1/2" - 45 Degree Left Tilt 18" x 13-1/2" - 45 Degree Right Tilt 18" Round Maximum Wise Opening: 21-1/2" Blade Speed (Hydraulically Variable): 60 - 400 FPM Blade Length/Width/Gauge: 14'6" x 1-1/4" x .042" Feed Pressure (Hydraulically Variable): 0 - 300 Lbs. Maximum Feed Length: 24" (Single Index) 216" (Multiple) Maximum Shuttle Table Load Capacity: 14,000 Lbs. EQUIPPED WITH: Programmable Control 10' Automatic Shuttle Type Bar Feed Hydraulic Lift Rollers Automatic Hydraulic Blade Tension; Hydraulic Vises Coolant System, Chip Conveyor 10 HP AC Main (Pump) Drive Motor 10' Exit Roller Table Electrical Controls

Ad # 14755		Tilt Frame Vertical Band Saw		Ad to Checklist
1991	Do all	TF 2021NC	Good	sold	Photo / More Info.
20" x 21" 45 Degree Max: DoAll #TF2021NC Tilt frame vertical band saw GENERAL SPECIFICATIONS Capacity 20” X 21” Capacity at 45 Degrees 14” X 20” Blade Speeds 50 to 300 FPM Blade Size 192” X 1 1/4” Head Feed Rate 0-12 IPM Main Motor Horsepower 10 EQUIPPED WITH Hydraulic Head Tilt Automatic Belt Tension Coolant System Hydraulic Feed Replaceable Wear Plates Infeed Shuttle

Ad # 11337		Tilt Frame Vertical Band Saw		Ad to Checklist
2008	Marvel	Series 8-Mark 3	Excellent	Sold	Photo / More Info.
18" throat x 22" height: 2008 Marvel Series 8 Mark 3 vertical tilt frame saw Less than 30 hrs on machine options:mist coolant system, air vise & blade QC air gun system Optional:has 4 sections of 10ft x 21.5" Wide Extra heavy duty conveyor than will sell for $650 each Features • 5HP Sensorless Vector blade drive 50-450 fpm. • Power rapid advance & rapid column return. • Automatic saw column retract. • Open lower bandwheel design for better chip control. • 60 degree tilting in both directions. • Optional Power tilt. • Blade stall/brake detection. • New improved blade tension • 1.25" blade • Patent pending Quick Change Column. • Patent pending Easy Load Guide Blocks. • 24VDC Controls. State of the Art Controls. • All Siemens IEC contactors and control relays. • ABB IEC Fused Disconnect Switch, NFPA79 compliant. • State of the Art Siemens S7 PLC. • All 24 Volt DC Control. • Allen Bradley Push Buttons. • High Quality Sensorless Vector Drive. • UL 508a Listed Electrical Panel. Capacity @ 90˚ 18" (457 mm) Horizontal, 22" (558 mm) Vertical Capacity @ 45˚Right 18" (457 mm) Horizontal, 14.5" (368 mm) Vertical Capacity @ 45˚Left 18" (457 mm) Horizontal, 13" (330 mm) Vertical Capacity @ 60˚ Right 18" (457 mm) Horizontal, 9.7" (246 mm) Vertical Capacity @ 60˚ Left 18" (457 mm) Horizontal, 7.3" (185 mm) Vertical Capacity with 3˚Cant 17.5" (445 mm) Horizontal, 22" (558 mm) Vertical Blade Speed 50-450 fpm (15-137 m/min) infinitely variable Feed Range 0-250 lbs. (64 kgf) T-Slotted Work Table Work area 24.25" x 33" (616 mm x 838mm) Table Height 34.5" (876 mm) Bandwheel Diameter 19" (482 mm), cast iron wheels Coolant System 21 gallons (79 liters) Blade 15' 4" (4674 mm) long x 1.25" (32 mm) wide, .042" (1.07 mm) thick Coolant Pump 1/8 Hp Blade Drive Motor 5 HP (3.75 kw) 1800 RPM

Ad # 12226		Tilt Frame Vertical Band Saw		Ad to Checklist
90s	Do All	TF-1421HA	Good	sold	Photo / More Info.
14" x 45 Degree: Do All Model TF 1421HA 14" Throat Tilting 45 Degree 34" x 32" Table 120-512 FPM Hydralic Clamping Voltage 440/3 Phase

Ad # 13984		Tilt Frame Vertical Band Saw		Ad to Checklist
1989?	Hem	V125M	Good	sold	Photo / More Info.
18" x 25" @ 90 deg. 18" x 18" @ 45 deg.: Hem Vertical Band Saw (tilt frame) Model: V125M Capacity: 18" x 25" @ 90 deg. 18" x 18" @ 45 deg. Blade Size: 1 1/4" x 17' Motor: 5 HP 80 PSI

Ad # 10267		Tilt Frame Vertical Band Saw		Ad to Checklist
82??	Marvel	Series 8 mark 2	Good	sold	Photo / More Info.
Marvel 8 vertical tilt frame saw mark 2: 18 x 22: tilt frame 18" throat CAPACITY: NOMINAL ................ 18" X 22" MAXIMUM ................ 18" X 22-1/2" BLADE @ 45 DEG NOMINAL . 18" X 12-3/4" BLADE @ 45 DEG MAXIMUM . 18" X 13" TABLE WORKING SURFACE ....... 33" X 24-1/4" TABLE HEIGHT ................ 34-1/2" NUMBER OF T-SLOTS IN TABLE .. (4) ACCEPTS 5/8" T-BOLTS BLADE LENGTH ................ 14'6" BLADE WIDTH/GAUGE ........... 1" X .035 MAXIMUM VISE OPENING ........ 21" HEIGHT OF VISE JAWS ......... 6" WIDTH OF VISE JAWS .......... 12" INF VAR BLADE SPEEDS ........ 50-450 F.P.M. FEED PRESSURE RANGE, INF VAR. 0-140 LBS. APPROXIMATE WEIGHT .......... 2,670 LBS. APPROXIMATE DIMENSIONS ...... 93"X 42"X 87" EQUIPPED WITH: - MANUAL TILT OF COLUMN 45 DEGREES LEFT AND RIGHT FOR MITER CUTTING

Ad # 8362		Tilt Frame Vertical Band Saw		Ad to Checklist
—	Marvel	81A 8/M5	Good	sold	Photo / More Info.
18in x 20in Marvel, Hyd., 30in x 33in Table, 60-400 FPM: USED 18" X 20" MARVEL VERTICAL BAND SAW Hydraulic w/Automatic Shuttle Type Hydraulic Bar Feed Capacities: 18" x 20" Mild Steel - 90dg 18" x 11 1/2" Mild Steel-45dg Left 18" x 13 1/2" Mild Steel-45dg Right Working Surface Of Table:30" L-R x 33" F-B Maximum Tilt of Column & Blade:45dg Left or Right (Powered) Blade Size:14' 6" Long x 1-1/4" Thick Distance Floor to Table:38" Blade Speeds Approx:60 - 400 FPM Equipped With: Operating Control with Push Buttons For Start - Stop Selector Switches For Cycle Single - Auto, Carriage - Forward - Stop - Auto Return - Coolant - Off - Lube Power Blade Guide With Selector Switch For Up - Down Power Tilt With Control Carriage Control with Rapid Forward Feed - Neutral & Rapid Return Feed Pressure Control With Feed Pressure Gauge 7" High Hydraulically Operated Vise with Control Blade Speed Selection via Hand Lever Gusher Coolant Pump 1/4 HP Coolant Pump Motor Hydraulic Pump Driven By 10 HP 1765 RPM 230/460/3/60 Main Motor BAR FEED SPECIFICATIONS: Length:10' Will Push Up Work:18" x 20" Maximum Weight:7000# Maximum Gauging Length:24" Equipped With:Manual Shuttle Control Handwheel To Set Desired Index in Inches or Millimeters Overall Dimensions Approx. 60" L-R x 97" F-B x 94" H (SAW) 121" L-R x 50" F-B x 40" H (FEED)

Ad # 8361		Tilt Frame Vertical Band Saw		Ad to Checklist
1995	Hemsaw	V-100LM-2	Good	sold	Photo / More Info.
18in Xx 20in HEM (Hemsaw), 26in x 26in Table, 60-400 FPM: USED 18" x 20" HEM (HEMSAW) VERTICAL BAND SAW Capacities: 18" x 20" Mild Steel @ 90dg 18" x 14" Mild Steel @ 45dg Working Surface Of Table:26" x 26" Maximum Tilt Of Column & Blade:45 Dg. Left Or Right Blade Size:14'3" Long x 1-1/4" Wide Distance Floor To Table:36" Blade Speeds Approx:60-400 S.F.P.M. Equipped With: Air Powered Head Clamp For Tilting Arm With Control For On-Off Air Powered Blade Tension With Control 8" High Air Powered Vise With Control Selector Switch For Motor On-Off Saw Vise Open-Close Arm Forward-Stop-Retract Feed Rate Micrometer Knob Cutting Pressure & Clamp Pressure Gauges Coolant Pump & Chip Pan With Control For Coolant Auto-Off-On 5 HP 1800 RPM 220/440/3/60 Blade Drive Motor

Ad # 8359		Tilt Frame Vertical Band Saw		Ad to Checklist
—	Marvel	V-10A	Good	sold	Photo / More Info.
10" x 10" Mild Steel: USED 10" x 10" MARVEL BAND SAW Automatic Shuttle Type Hydraulic Bar Feed Capacity:10" x 10" Mild Steel 7" x 10" Mild Steel @ 45° Working Surface Of Table:22" L-R x 24" F-B Maximum Tilt Of Column & Blade:45°-Right Blade Size:12' Long x 1" Width Distance Floor To Table:35" Blade Speeds Approx:60-400 FPM Equipped With:Operating Controls With Pushbuttons For Start - Stop; Selector Switches For Out-Of-Stock On-Off; Cycle Single-Auto; Blade Stop-Run; Shuttle Vise Closed-Open-Auto; Piece Counter On-Off Feed Pressure Control With Direct Reading Dial 5-1/2" High Hydraulically Operated Vise With Control Coolant Pump Hydraulic System Driven By 1-1/2 HP 1800 RPM 230/460/3/60 Motor BAR FEED SPECIFICATION: Length:15" Weight Approximately:5000# Will Push Up Work:10" x 10" Equipped With:Manual Shuttle Control Handwheel To Set Desired Index

Ad # 4610		Tilt Frame Vertical Band Saw		Ad to Checklist
1990	Marvel	V-10A2PC	Very Good	Sold	Photo / More Info.
Marvel 10" x 14" Automatic ,Hyd, Tilt Frame Saw: 1" Blade 10" round Cap 10" x 14" flat capacity, at 45 deg 10 x 9in at 45 deg 9" round vise opening 10.5" jaw height-6" blade size: 13ft x 1 x .035 speed: 50-500FPM 3HP feed: 0-250 hyd motor: 1.5HP coolant res: 10 gal (Hyd) Tilt head 45 deg left & right Cuts 10" wide @ 45 deg. 14" Throat Auto mtl. feed shuttle-PC controlled 15" stroke per cycle max 9 cycles shuttle table 36" long- 5000lb capacity 1" blade width

Ad # 10087		Tilt Frame Vertical Band Saw		Ad to Checklist
60's	DoAll	Mach Type 36-W	Very Good	Sold	Photo / More Info.
18" throat : DoAll Zephyr Saw. Has job selector dial and variable speed. Full tilt tab...

Ad # 7261		Tilt Frame Vertical Band Saw		Ad to Checklist
1978	MARVEL	8/MGI	Very Good	Sold	Photo / More Info.
18”x 20” No. 8 MARVEL Hi-Column Tilt Frame Vertical Band Saw, Model 8/: 18”x 20” No. 8 MARVEL Hi-Column Tilt Frame Vertical Band Saw, Model 8/MGI Capacity: Nominal 18” x 23 ½” Maximum 18” x 28” Blade at 45° Nominal 18” x 16 ½” Blade at 45° Maximum 18” x 18” Table working surface 33” x 24 ¼” Table height 32 ½” Tee slots-No. and size 4- ¾” Maximum vise opening 21” Height of vise jaws 6” 6 Blade speeds 40-200 FPM EQUIPPED WITH: (1) Work vise Coolant pan 1 ½ / ¾ H.P. 3/60/230 volt main drive motor with controls

Ad # 7260		Tilt Frame Vertical Band Saw		Ad to Checklist
1975	MARVEL	No. 8	Very Good	sold	Photo / More Info.
MARVEL All Mechanical, Universal Vertical Band Saw, Model No. 8: MARVEL All Mechanical, Universal Vertical Band Saw, Model No. 8 Capacity: Nominal 18" x 18" Maximum 18" x 22-1/2" blade at 45 degrees nominal 18" x 12-1/2" blade at 45 degrees maximum 18" x 14" Number of t-slots in table (size) 4 (3/4") Table working surface 33" x 24-1/4" Table height 32-1/2" Blade length 14' 8" Blade width/gauge 3/4" x .032 Maximum vise opening 21" Height of vise jaws 6" (6) Blade speeds 40 to 200 F.P.M. EQUIPPED WITH: Manually operated tilt column and blade up to 45 degrees left and right of vertical for miter cutting Built-in tilt protractor for setting column at desired angle T-slotted work table with quick-acting vise Stops to limit both forward and return travel of the column and blade Automatic blade tensioning Self-contained coolant system with pan 1.5-.75 H.P. 3/60/230 volt, 850/1,765 R.P.M. two speed drive motor with push button electrical controls

Ad # 9980		Tilt Frame Vertical Band Saw		Ad to Checklist
—	Do-All	TF-14H	Good	sold	Photo / More Info.
14" throat : 14" throat 75-250 FPM Hyd tilt head 45 deg tilt 24" work height Dual hyd. vises Std Specs below -please verify Cutting Capacity - At 90 Degrees 14" x 14" - At 45 Degrees 9-3/4" x 14" Blade Size 160" x 1" x .035" Blade Speed (Inf. Variable 105 - 275 FPM Blade Feed Infinitely Variable Column Tilt 45 Degrees Right or Left Table Capacity 1000 Lbs. Motor - Drive 2 HP 3/60 - Hydraulic 5 HP 3/60 Overall Dimensions (Approx 60" L-R x 94" F-B x 84" H Weight (Est 2750 Lbs.