Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 10930 | Pipe, Tube & Bar Cut Off (Production) |
1941 |
Continental |
3H |
Good |
sold |
Photo /
More Info. |
Continental Pipe/Tube Cutoff: 3HP motor
Manually actuated cutoff wheel
Comes with a generous
supply of cutoff wheels
Additional information is
available at Continental
Website |
|
Ad # 12853 | Pipe, Tube & Bar Cut Off (Production) |
2000 |
Everett |
14-16 wet |
Excellent |
sold |
Photo /
More Info. |
4.5" Abrasive: Everett abrasive wet cut off saw 14-16" dia blade
4.5" capacity solids to 3"
very nice condition
flood coolant system
power down feed
fully enclosed
18k replacement value
100% usa made
includes 20 feet of tables
10 infeed
10 outfeed |
|
Ad # 14793 | Pipe, Tube & Bar Cut Off (Production) |
|
Watterberry Farrel |
#2:24" |
Good |
sold |
Photo /
More Info. |
Waterbury Farrel#2 slitting line:24": 24” Waterberry slitting line
Arbor size is 3.250, good for light
gauge.
This is a driven head with driven
exit pinch
rollers
Includes hydraulic scrap winder (800
Lb
capacity)
with traverse arm, full set of
slitter knives
and
tooling (see attached).
4,000 Lbs 24” uncoiler with air
brake
we have a 24” re-coiler with over-
arm
separator
8,000 Lb capacity with hydrualic
push
off, 16”
drum. This was not part of the line
but can be
used with this line. Motor is 35 hp
DC
tooling for 24" waterbury Farrel
slitter
24" #2 Waterbury Farrel Slitter
3.250" Arbors
Louis Allis 5 HP DC Gear Motor solid
state Drive
and Control
Driven Exit Pinch rollers for de-
burring
Knives
42 Pcs. .120 x 6.445 O.D.
41 Pcs. .500 x 6.500 O.D.
Full set of rubber stripper rings
Spacers 3.250" I.D. x 4.875" O.D.
.750" x .312"
Keyway
40 Pcs .032
30 Pcs .062
31 Pcs .125
20 Pcs .250
17 Pcs .500
12 Pcs .750
10 Pcs 1.00"
8 Pcs 2.00"
2 Pcs 3"
4 Pcs 6"
updated info below: 24" Waterbury slitter
-Driven head-Control Panel- 3.250" arbor-4,000
Lb un-coiler- 6,000 Lb re-coiler with
hydraulic
push off. 500 Lb capacity Scrap winder-
overarm
separator. Head is driven by Louis Allis 5hp
gear motor -solid state drive and control with
driven exit pinch rollers for de-burring. Line
includes full set of tooling, slitter knives
and rubber stripper rings. Knives- 42 Pcs .120
x 6.445" O.D. 41 pcs .500 x 6.500" O.D.
Spacers- 3.250" I.D. x 4.875" O.D. .750 x .312
Keyway 40 Pcs .032 30 Pcs .062 31 Pcs .125 17
Pcs .500 12 Pcs .750 10 Pcs 1.00 8 Pcs 2.00 2
Pcs 3" 4 Pcs 6" line produces excellent narrow
width slit coil with minimum burr. Thickness
range of .015-.060. Line can slit thicker then
.060 if as larger drive motor is used. Carbon
steel (1008-1095) and stainless steel (200-400
series) were primarily processed on this line.
Available for inspection at our warehouse
Used 24" Waterbury Farrel slitter. Slitter
head and other components have been well
maintained. Line was de-commissioned last
summer and replaced by a new slitting line.
All
drive motors and other components are in
working condition. This is a decent close
tolerance line.
The re-coiler has a hydraulic push off plate.
The scrap winder is also run by hydraulic. The
overarm separator is controlled by air
pressure |
|
Ad # 14264 | Pipe, Tube & Bar Cut Off (Production) |
|
Leco |
CM-15 /822-100 & 831-300 |
|
sold |
Photo /
More Info. |
: Leco CM-15 cut-off saw-bench top unit
abrasive blade type
coolant system included
wheel size: 10" x 1/16" x 1-1/4" leco # 811061 |
|
Ad # 15320 | Pipe, Tube & Bar Cut Off (Production) |
2009 |
Elumatec |
KS 101/23 |
Good |
sold |
Photo /
More Info. |
2.4" depth x 4" height: Elumatec
Made in Germany
KS 101/23
Serial No.: 1012331601
3/PEN/240 V/60 HZ/1800W
RPM: 3400 RPM
Mfg. Date: 2/2009
Manufacturer's Website Link:
https://www.elumatec.de/fileadmin/data/corporat
esite/p
df/en/products/elumatec_KS101.pdf
You Tube Video Showing this Model Saw in
Operation:
https://www.youtube.com/watch?v=av4EEvGjoHs
Buyer responsible for freight logistics and
expenses.
Seller agrees to load onto Buyer's
transportation; I have
the ability to deliver in OR/WA.
Equipment not under power and available for
inspection.
Quoted fob Seller's shop in Portland, OR.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 3104 | Pipe, Tube & Bar Cut Off (Production) |
|
|
|
Fair |
SOLD |
Photo /
More Info. |
Great for cutting large pieces!: |
|
Ad # 5009 | Pipe, Tube & Bar Cut Off (Production) |
Unk |
Stone |
Unk |
Good |
SOLD |
Photo /
More Info. |
Aluminum Miter Saw - Double 10" blades: This saw is specificaly designed to make miter cuts in aluminum extrusions.... |
|
Ad # 7712 | Pipe, Tube & Bar Cut Off (Production) |
unk |
unk |
TS400 |
Very Good |
sold |
Photo /
More Info. |
STIHL Model Number TS-4000 Gas Powered Saw with 14" Blade: This is a STIHL brand chop saw. It has a 14 in.
blade. It is gas powered. 2 stroke. Model #TS4000.
Is used but, works great !Pull start. starts right
up ! Has a brand new blade included. I paid $965.00
total, when it was new. |
|
Ad # 13385 | Pipe, Tube & Bar Cut Off (Production) |
|
Kalamazoo |
K14SS-3 |
Good |
sold |
Photo /
More Info. |
14": 14" abrasive cutoff saw. 5 hp motor. Dual v-belt
drive. Extra heavy cast iron base, trunion, arm.
Sealed ball bearings. Optional stand available from
Kalamazoo. |
|
Ad # 9465 | Pipe, Tube & Bar Cut Off (Production) |
|
Everett |
20-AA22 |
Fair |
SOLD |
Photo /
More Info. |
Abrasive cut off-22" cut off blade: 220 3 phase
air chuck
7" shapes |
|
Ad # 7684 | Pipe, Tube & Bar Cut Off (Production) |
|
Bardon,s and Oliver |
No. 35 |
Excellent |
SOLD |
Photo /
More Info. |
24 foot standard automatic feeder table: This machine was rebuilt to manufacturers specifications by the OEM. The mo... |
|
Ad # 12140 | Pipe, Tube & Bar Cut Off (Production) |
2010 |
everett |
26 OSB |
Excellent |
sold |
Photo /
More Info. |
up to12": Wheel Capacity 26" diameter blade
12" dia mtl cut max
Motor 40 HP Special Hi-Torque, 3 Phase
Starter Magnetic with thermal overload; 110 volt at the pushbuttons
Spindle Bearings Heavy-duty sealed ball bearings. Lubricated for life
Arbor Shaft 1"
Drive Positive timing belt
Oscillator 1/3 HP gear motor
Safety Guards Cut-off wheel and guards exceed safety code requirements
Stop Adjustable down stop limits dept
26" Wet Abrasive Oscillating Cut-Off Machines
•COMPLETE with 30 or 40 HP TEFC motor, magnetic starter with 110 volt at the pushbuttons, oscillation, air operated "V" shaped chain hold-down vise, coolant tray, settling tank and pump
•Exclusive vibra-action oscillation moves the wheel back and forth while cut is being made. This reduces the area of contact between the wheel and material, resulting in improved quality of cut, less heat build up, less burr and increased wheel life.
•Capacity: 5" solids. Most 7" Shapes
can cut thru 5" solid bar in 130 seconds will saw any material steel,stainless,cast iron,aluminum or brass
machine is nearly new came from TVA cost over $30,000.00 new comes with a wet tank 10 extra blades
has a 40 HP motor running saw |
|
Ad # 8227 | Pipe, Tube & Bar Cut Off (Production) |
|
Continental |
3A |
Very Good |
Sold |
Photo /
More Info. |
Continental Hydraulic Pipe and Tube Cut-Off: Continental Pipe and Tube Rotary Cut-Off
3/16-4.5" dia tube/pipe max capacity
3/8" max wall thickness
2 HP with about 8 inch cut off wheel
in very good condition
manual feed |
|
Ad # 8130 | Pipe, Tube & Bar Cut Off (Production) |
1960s |
TOLEDO BEAVER |
SPEED CUT 20A |
Good |
sold |
Photo /
More Info. |
20" CUT OFF SAW: TOLEDO BEAVER 20" CUT OFF/CHOP SAW WITH 1 HP 3600 RPM MOTOR AND ATTACHED V... |
|
Ad # 11808 | Pipe, Tube & Bar Cut Off (Production) |
1994 |
Vulcan Tool Corp |
2-3/4" |
Good |
**sold** |
Photo /
More Info. |
Brehm Tube cutting Mill line -2-3/4" max cap: Vulcan Tool Corp.
2-3/4” max dia
Brehm tube cutter.
It has a magazine type auto loader.
The machine is under power and we have several punch and die combination.
20'ft loader feed system in and out
light curtain system
30" cut length adjuster rod
De-nipper machine included
touch screen control |
|