Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 5576 | Fully Automatic Horizontal Band Saw |
60's? |
Marval |
15A |
Good |
sold |
Photo /
More Info. |
Fully Automatic 16" Hrizontal band saw with Shuttle feed: Capacity: 16" round , 20" x 16" rectangle
no chip auger
no mitre
1-1/4" blade
|
|
Ad # 14930 | Fully Automatic Horizontal Band Saw |
1998 |
Amada |
HA250W |
Good |
sold |
Photo /
More Info. |
10" rounds: Amada # HA250W fully automatic shuttle feed
horizontal band saw
Model: HA250W
Cutting Capacity (Rectangular) : 10" x
12"
Cutting Capacity (Round) :.... 0.5"-10"
Work Load Capacity :...... 3,307 Lbs.
Blade Size .. 1-1/4" x 138" x 0.042"
Blade Speeds :variable speed dial : 89-
295 FPM
Saw Blade Motor .......................
5 H.P.
Machine Dimensions ... 77" x 89" x 74"
Machine Weight ..... 3,087 Lbs.
EQUIPPED WTIH:
Infeed System
9 Times Multi Index
Split Vise
Index Floating Vice
Piece Counter
Motion Detector
Pressure Flow Valve
Variable Speed-reeves drive
Chip Conveyor/auger
note:roller conveyor 5 ft section included
|
|
Ad # 14935 | Fully Automatic Horizontal Band Saw |
|
Do-All |
1612-0 |
Good |
sold |
Photo /
More Info. |
16" throat: Do All vertical band saw # 1612-0
throat: 16"
work height:12"
table:24" x 24 tilting
RPM:Hi 860-5200 rpm,Low: 50-300 rpm ranges
blade welder
work light
air blow off
rip fence
has a 1/4" blade in it..spares
Notes: nice saw! |
|
Ad # 14479 | Fully Automatic Horizontal Band Saw |
2007 |
DOALL |
C-305NC |
Excellent |
sold |
Photo /
More Info. |
12"X12": 2007 Do-All C-305NC fully auto shuttle feed saw
Fully automatic NC band saw. 5hp blade
motor.
1-1/4" x 0.042" x 144" blade. Cut length
0.5"
to
999". Feed stroke 16". Front and back
vises.
Flood coolant system. Power blade brush.
Work
light. Chip auger. NC control. |
|
Ad # 15364 | Fully Automatic Horizontal Band Saw |
1992 |
Hyd-Mech |
S25A |
Good |
Sold |
Photo /
More Info. |
18" x 27" capacity: 1992 Hyd-Mech # S25A Automatin mitre swivel
horizontal band saw
18" x 27" capacity
MODEL ........................... S25A
YEAR ............................ 1992
ROUND CAPACITY .................. 18"
DIAMETER
RECTANGULAR CAPACITY ............ 18" H X
27" W
CAPACITY @ 45 DEGREE ANGLE ...... 18"
DIAMETER
CAPACITY @ 30 DEGREE ANGLE ...... 12"
DIAMETER
BLADE WIDTH ..................... 1.5"
BLADE LENGTH .................... 18'10"
BLADE SPEED ..................... 75 TO 400
SFM
BLADE TENSION ................... HYDRAULIC
POWER MITERING .................. YES
AUTO CYLCE ...................... YES
WORK LOAD ....................... 8000 LBS
COOLANT ......................... 3.5 GPM
AUTOMATIC FEED STROKE ........... 0" TO 40"
SINGLE STROKE
NUMBER OF FEED STROKES .......... 1 TO 99
BLADE DRIVE MOTOR ............... 10 HP
HYDRAULIC DRIVE MOTOR ........... 3 HP
No feed system; not fully automatic |
|
Ad # 9796 | Fully Automatic Horizontal Band Saw |
91 |
Amada |
HA-250 |
Very Good |
SOLD |
Photo /
More Info. |
10" capacity round: 0.5"-10" round capacity
10 x 12 rectangle
blade speed-89-295FPM
5HP
1"blade
1-999 cut off pieces input
cut length 0.394-141.7"
hydrolic clamp / feed
split vise
miter
coolant
Std: features below-please verify
9 Times Multi Index
Diagnostic Lights
Index Floating Vise
Kerf Compensating Dial
Motion detector
Piece Counter
Pressure Flow Valve
Split Vise
Variable Blade Speed Drive
Zero Clamp Vise
|
|
Ad # 13645 | Fully Automatic Horizontal Band Saw |
70's ? |
Do-All |
C-58/68 |
Fair |
sold |
Photo /
More Info. |
13" rounds-auto shuttle feed: Do All Fully Automatic Horizontal band saw w/ shuttle feed
Capacity: 12"rounds ;12" x 12" flats
vari blade speed 60-350FPM
Hyd. blade tensioner
16" dia band wheels
vise opening: 11" wide x 6.25 high-hydraulic actuated--auto or manual control-swivel to 45 degress-mitre: max: 6.5" wide x 7.5" high
auto stock index max: 12" rounds up to 4,000lbs infinate variable
coolant 15 galtankw/ chip drawer
1" blade width
coolant system
Auto shuttle feed system-triple stoke settings 0-24", 24-48", 36-72"
Note: saw was only used recently as a manual saw, needs some work to convert to back to fully auto shuttle feed...but can be used a a manual saw |
|
Ad # 1459 | Fully Automatic Horizontal Band Saw |
1995 |
Missler |
DEB280-CENC |
Good |
SOLD |
Photo /
More Info. |
Missler -Automatic Horizontal Band Saw: German made with Numerical Control.
Blade: 1.25"
Capacity: 11" x 11"
Round Cap: 12"
|
|
Ad # 11672 | Fully Automatic Horizontal Band Saw |
|
Do-All |
C 305 |
Excellent |
sold |
Photo /
More Info. |
12" x 12": Do-All Model C 305
12" x 12"
Blade Speed (Variable): 60 - 350 FPM
Blade Size: 1-1/4" x 144"
Bar Feed:
Min -Index Length: 1/4"
Single Index Length: 16"
Multiple Index Length: 128"
Blade Wheel Diameter (2): 15"
Hydraulic Tank Capacity: 10 Gallons
Coolant Tank Capacity: 20 Gallons
Dimensions (W x D x H): 100 " x 75" x 52"
|
|
Ad # 14373 | Fully Automatic Horizontal Band Saw |
2014 |
UZAY |
UMSY900SP |
New |
sold |
Photo /
More Info. |
35" Round, 35" x 51" Rectangular: Double column heavy duty sawing machine for
cutting high resistance hard to cut tough
materials, from soft materials to Inconel,
Titanium and Hi Temp alloys. With a Special
designed hydraulic double (split) vice jaw
system, the work piece can be clamped in front
and at the back of the sawblade to ensure
increased cutting performance. This split front
vise reduce the remnant length. Developed for
steel and metal service centers, forging , die
and tool shops . Optionally machine can be
equipped with carbide saw blades. For more
accurate material positioning optional laser
line is recommended..
The machine is supplied complete with the
following:
•Variable blade speed from 65 ft/min to 328
ft/min
•Double Linear Guide column
•Hydro mechanical blade tensioning
•Blade breakage detection
•Hydraulic material clamping
•Coolant Pump
•Reduced Blade Vibration
•60” In feed Roller table
•Hydraulic double Vice
•Cutting height adjustment
•Speed control for hydraulic down feed
•Hydraulic linear guide blade guiding arm
•Manufacturers warranty
|
|
Ad # 14823 | Fully Automatic Horizontal Band Saw |
2011 |
Cosen |
C-320NC |
Good |
sold |
Photo /
More Info. |
12.6" dia max rounds: 2011 Cosen horizontal fully Automatic Shuttle feed
band saw #C-320NC
std. mfg quote below,please verify actual
machine
Fully Programmable
Dual Column
Automatic Bansaw
Cosen's C-320NC, incorporates a 5 hp
powerful blade motor, 1 1/4” wide blade,
independentcontrol panel, and heavy-duty dual
column design.
These features create a very rigid,
dynamically stable and productive machine. The
oversized precision ground columns ensure smooth
saw frame movement and the consistently stable
cutting force required throughout the cutting
cycle, thereby increasing the cutting efficiency
and extending blade life.
Cosen now offers the latest in Touch Screen
Control Technology, SNC-100. Coupled with a
Mitsubishi PLC controller the 5.7” Color
Touch Screen allows for fast easy programming of
any job. Utilizing the SNC-100 System the operator
easily programs the cut length and quantity
desired. The SNC-100 System stores up to 99
cutting jobs and features
Automatic Kerf Compensation for parts longer
than a single index. The SNC-100 System also
utilizes “Save-A-Blade” which retracts the
material 1/8” from the blade at the end of
each cut so the blade will not rub the material
while the saw head moves up to allow the next
index. All machine functions are controlled from
the operator’s station.
MACHINE SPECIFICATIONS
Maximum Cutting Capacity:
Round:12.6"
Square:12.6 x 12.6"
Rectangle (w x h):15" x 12.6"
Bundle (w/ optional. top clamps)
max.dia:O 12.6"
max.rectangle :15" x 12.6”
max: 6 3/8" x 12”
min: 2.5” x 7 3/8”
Blade: Speed – Inverter Driven:66 – 328 fpm
(high range) 49 – 246 fpm (low range)
Size:1 ¼" x 13'11" x .042"
Guides:Carbide
Motor: 5 HP
Hydraulic:1 HP
Coolant:1/8 HP
Automatic Material FeedSystem:
Job Storage:up to 99 jobs
Single Index Stroke:0" to 16"
Multiple Stroke Indexing:Up to 99 jobs
0" to 650" (featuring automatic kerf
compensation)
Weight 4,990 lbs.
MACHINE FEATURES
Machine Structure:
► Oversized Precision ground, large Dual
Columns support and guide the rugged saw head
through the entire cutting cycle. The saw head
adopts a back tilt design which allows the blade
to twist less than traditional bandsaws between
the wheel and blade guide; thereby putting less
stress on the blade, insuringlonger life.
► The oversized round columns provide hundreds
of square inches of continuous surface contact
with the sawhead throughout the entire
cutting process.
► Cross Link is located on the top of the
columns, connecting the two columns to form
an archway design that gives it sound structural
strength.
► Hydraulic shuttle vise assembly, made of
heavy-duty cast iron with replaceable hardened
wear plates, rides on two large guide shafts
that are capable of handling extreme loads.
Both shafts are ground and chrome plated for
durability and smooth material feeding.
Blade Drive:
► The gearbox is specially designed to
accept high lateral pressure. Unlike conventional
gearboxes, the Cosen design accepts more
pressure during operation and will not create
thermal distortion, providing long gearbox
life under production conditions.
► Inverter blade drive system allows
infinitely variable blade speeds to be
controlled by the
operator from the control panel with turn of
a knob. The system comes standard with
LED readout for convenient and accurate
setting of blade speed.
Blade Guidance & Lubrication System:
► Carbide guides securely guide the blade
during the cutting cycle. The carbide is
relieved so that coolant can both cool and
lubricate the blade during the cut.
► The bearing guides eliminate blade stress
by pre-aligning the blade before it enters the
carbide guides. Two additional guides
located on a central axis support the blade from
the top, giving it extra penetrating force
forfaster cuts.
► Automatic hydraulic blade tensioning
device provides correct blade tensioning when the
machine is turned on and will slightly
release the tension when the machine is not
running. This extends blade life. The on-off
hydraulic valve switch is an added feature
making blade change quicker and easier
► Integral coolant system. Coolant is
supplied at four critical points: exit & entry of
blade through blade guides, middle of cut via
adjustable flex hose, and blade cleaning
brush. Synchronized power driven blade brush
effectively cleans chips from blade to extend
blade life.
Control & Automation:
► The operator’s control station
ergonomically located on the front side of the saw
is convenient and user friendly. All operator
controls are positioned on the top of the control
box and clearly labeled for ease of operation.
The electrical components are located inside
the control box with the main lockout
disconnect on the front of the control box for
safety and maint.
Smart NC-100 (SNC100) technology provides
most of the benefits of NC controlled saws at a
mere fraction of the cost. SNC100 controls are
programmable up to 99 different jobs including
quantity and length of cut. The
control automatically compensates for Kerf
loss after data input and requires no manual
calculation of number of times to index. The
control also automatically shutdowns the
machine, blade motor, and hydraulics, once the
programmed number of cuts or out of stock
situation has been achieved. The system
includes an error feedback function enabling
rapid troubleshooting through an error code to be
displayed in the event of a malfunction.
► SNC-100 Features include:
· 5.7” Touch screen
· Mitsubishi PLC controller
· 99 individual jobs can be programmed and
stored· Stored program(s) may be easily
recalled and executed at Will.
· Blade Speed Display
· Motor amp draw (optional)
· Optional Blade Deviation Detection monitor
can be controlled directly from Touch Screen
· Automatic Kerf Loss Compensation &
Automatic Multiple Indexing up to 650”
· Save-a-Blade Feature - The shuttle vise
will automatically retract the material slightly
after cut-off, so a blade can avoid the
undesirable abrasion with material,
improving cutting tool life.
· Error Code Display Provides simplified
self-diagnostics.
· Blade life timer.
► Precision feed pressure & feed rate dual
valve system for optimal cutting performance in
any material.
Selector Switch for bundle or single cutting
modes
► Automatic work height sensor and air gap
eliminator positions the saw frame to a safe
clearance above the work piece, so that the
next piece can be positioned without damaging
the blade. After feeding, the saw head
will descend quickly to within approximately
1/8" of work piece, where it proceeds at the
predetermined cutting rates.
Material Clamping & Feeding:
► Split vise jaws on the front machine vise
are standard. The split front vise will hold the
work piece on both sides of the blade for a
burr-free cut. This system also features
automatic feeding of material down to a
remnant length of 2".
► Hydraulic front and rear vises enable
clamping and unclamping of any material from
the operator’s control station.
► Ductile cast iron vise with replaceable
hardened wear plates.
► Smart NC Controlled Multiple indexing for
long cutting lengths of up to 650” maximum
length, utilizing full shuttle length every
index until desired length is reached.
One set of vertical alignment rollers, which
is convenient for bundle cutting and
positioning bar stock, is standard and is
located on the machine base.
Multiple horizontal rollers located on the
entry side of the saw to facilitate smooth
material feeding.
Discharge Table with built–in coolant return
adequately supports cut-off stock and
provides coolant savings in the long run.
Proximity switches sense both blade slippage
and blade breakage and will automatically shut off
the machine if either of these conditions should
occur.
► All blade covers, and guarding on the saw
are painted Alert Orange to increase safety
alertness.
All exposed electric wiring and hydraulic
circuit are protected by conduits.
|
|
Ad # 14818 | Fully Automatic Horizontal Band Saw |
2014 |
KMT |
H310A |
Excellent |
sold |
Photo /
More Info. |
mitre cutting-fully automatic feed: KMT H310A specs below
Capacity:10" round
blade speed: 60-360 FPM variable
blade width: 1",9'1" long
carbide guiodes
feed stroke 20" max length unlimited shuttle
feed
accuracy +- 0.008"
blade motor: 2HP
coolant tank:10gal
weight:1700lbs
capacity at90deg 10" at 45deg 8",at 60deg 5"
note:full 1 year parts warranty included this
machines has approx: 5 months of use on it |
|
Ad # 15950 | Fully Automatic Horizontal Band Saw |
1997 |
HEM Saw |
H 130 HA-DC |
Good |
sold |
Photo /
More Info. |
18" x 20" bundle: This saw is fully automatic it has a 72"stroke
feed. It can saw a 18" x 20" bundle. Top Clamps,
10 Hp. 19' x 1 1/2 blade.
This saw is currently operating 40 hours a week
every week.It is holding a .0625 tolerance. It
comes with 3 10' roller tables. |
|
Ad # 11595 | Fully Automatic Horizontal Band Saw |
2004 |
Do-All |
C-330NC |
Very Good |
sold |
Photo /
More Info. |
13" round fully automatic shuttle feed: 2004 DO-ALL C-330NC
AUTOMATIC CUTOFF SAW
Capacity (Round) 13"
Capacity (Rectangle) 13" x 13"
Blade Size 1" x 166"
Blade Speed 50 - 400 FPM
Electric 208-230V
Power 19.4 amps
Weight 3800 lbs.
FEATURES:
Dual Column Production Band Saw
(11) Programmable Speeds
10 ft. Roller Conveyor
Mfg Date January 2004
|
|
Ad # 14299 | Fully Automatic Horizontal Band Saw |
1993 |
Hyd Mech |
H 16 |
Good |
sold |
Photo /
More Info. |
16" Rounds 16" x 16": Hyd Mech Model H 16
Voltage 220/3
PLC 100 Control
Year 1993
16" Rounds
16" x 16" Bundling
Blade Length 18 ft 10"
Width 1 1/2"
Blade Speed 75 - 400 FPM
Blade Drive 10 Hp
Weight 8500
Shuttle Store 0- 40" milti-indexing
Work load 10,000 lbs max.
Note:Auto Feed Needs minor Work. Saw Cuts
in
Manuel Mode fine..think its an easy fix to
run
auto feed
|
|
Ad # 10669 | Fully Automatic Horizontal Band Saw |
|
Marvel |
15A-7/M8/M10 |
Needs Work |
SOLD |
Photo /
More Info. |
16.5" rounds: 16.5" rounds
20 x 16 rectangle
1-1/2" blade
|
|
Ad # 11553 | Fully Automatic Horizontal Band Saw |
1991 ? |
Do-All |
C-260A-2 |
Good |
sold |
Photo /
More Info. |
10" round cap.-Auto feed: Vise jaw cap: 12" H x 10.25W x 10.25 Deep
Cap, 9"x12" rectangle cap
SPECIFICATIONS & DESCRIPTION: std specs below-
please verify
Sawing capacity range: 9" x 12" rectangle
Blade size: 1-1/4" W x 12' overall length
Automatic indexing capability
Adjustable blade pressure
Variable feed
Variable blade speed adjustment (60-350 fpm)
Coolant system
Stock feed clamp
ELECTRICS: 5 HP Main Drive Motor 220/440v / 3
wired 440/3 Ph / 60 HZ
|
|
Ad # 12624 | Fully Automatic Horizontal Band Saw |
|
Do All |
C-1216A |
Good |
sold |
Photo /
More Info. |
12" x 16" rec::12" Round: Do All
12" X 16" DOALL HORIZONTAL BAND SAW
Model No.
C-1216A
Capacity:
12" x 16" Flats
15" Round
Band Wheels:
16" Diameter
Blade Size:
1.5" x 162" x .035"
Work Height:
30"
Blade Speeds Approx.:
40 - 450 FPM
Hydrailic Clamping Front and Rear |
|
Ad # 10622 | Fully Automatic Horizontal Band Saw |
1995 |
Behringer |
HBP310/403GA |
Needs Work |
sold |
Photo /
More Info. |
mitre saw-Capacity (rect) 90°-15.7" x 12.2": CNC programmable length and angle setting
available
mitre saw-Capacity (rect) 90°-15.7" x 12.2"
Large dual column - parallel down-feed design
Fully automatic hydraulic blade tensioning
Horizontal and vertical material clamping
Biased saw blade for cutting of profiles
.
Std. specs below please verify
Model HBP310/403GA
Capacity (rect) 90°-15.7" x 12.2"
45° left WxH-10.6"x12.2"
45° right WxH-13.7"x12.2"
Includes all manuals
Also incl;udes all conveyors shown in pix
Band Width-1 1/4"
Drive Motor (HP)-4
Weight (LBS.)-6,600
|
|
Ad # 14753 | Fully Automatic Horizontal Band Saw |
2006/13 |
Do All |
C3350 |
Excellent |
sold |
Photo /
More Info. |
13" x 13" automatic: 2006 DoAll C3350NC rebuilt 2013 by doall
13" x 13"
1"-1/2 Blade
Dual columns for saw head mounting with
linear
rails and trucks on guide columns
3 degree head cant
Spring-loaded, zero clearance, carbide -
faced
saw guides with lead-in roller on both
guide
arms
Coolant is applied through saw guide
arms and
flushing hose
Automatic work height sensor
Pressure and rate controlled head feed
Hydraulic band tension
Saw head rapid approach control
Saw enclosure provides additional
operator
safety and contains more chips and
coolant
NC controls with operator display &
interface
buttons
Rapid travel index vice control
Band break switch
Hydraulic motor driven band brush
Programmable cut length w/digital
readout
Outboard front vice reduces remnant ends
Out of stock sensor
Automatic multi-index
Automatic band-kerf compensation
Random cut positioning
Band door interlocks
Display showing band motor amps load
draw
Blade guards
Powered chip conveyor
was 60K new!
Only one one set of conveyors.
|
|
Ad # 10582 | Fully Automatic Horizontal Band Saw |
1995? |
Hem |
H90A-B/F |
Good |
sold |
Photo /
More Info. |
Capacity 12.75" x 12.75" : Specification Description -std specs
Capacity 12.75" x 12.75"
Blade Size 1" x 12' 10" x .035"
Motor 3 HP
Stroke (Single Index) 0 - 24"
Blade Speeds (Adjustable) 60 - 300 SFM
Clamping Pressure (Adjustable) 0 - 1,700 lbs.
Voltage 220 - 440V / 3 / 60
Dimensions O.A. 105" x 86" x 60"H
Equipped With:
* Control console on top of Saw Arm-Bi Function Ctlr
* Semi or Full Auto modes
* Out of stock switch
* Blade break switch
* Shaft driven power blade brush
* Variable vise pressure
* 2 each hold down fixtures
* Feed table w/mechanical digital read-out
* Vertical alignment bar
* Flood coolant system
* Wash down hose
* 18" exit support
* 0-24" stroke-single index
spare roller infeed table included-not shown
|
|
Ad # 15552 | Fully Automatic Horizontal Band Saw |
|
Do-All |
C-1216-A |
Good |
sold |
Photo /
More Info. |
12" x 16": USED “DO-ALL” AUTOMATIC METAL CUTTING
HORIZONTAL
BAND SAW
HYDRAULICALLY OPERATED
CAPACITY 12” x 16” RECTANGLE
15” ROUND
BLADE SIZE 162” x 0.035 x 1-1/4”
BLADE SPEED 85 – 450 S.F.P.M. (VARIABLE)
WHEEL DIAMETERS 16”
MATERIAL INDEX: SHUTTLE VISE
MAIN MOTOR 5 HP/440/3/60
COOLANT MOTOR 1/3 HP
HYDRAULIC MOTOR 2 HP
COOLANT CAPACITY 15 GALLONS
HYDRAULIC CAPACITY 15 GALLONS
WITH HYDRAULIC VISE & COOLANT PUMP
ENTRY & EXIT TABLES |
|
Ad # 12545 | Fully Automatic Horizontal Band Saw |
2010 |
HEM |
H90A-1 |
Excellent |
sold |
Photo /
More Info. |
12"x 16": Hem Saw
H90A-1
3 HP
1" Blade
12" x16" rectangle
12" Round
hyd. clamp feed |
|
Ad # 12490 | Fully Automatic Horizontal Band Saw |
1979 |
Marvel |
15 A |
Good |
sold |
Photo /
More Info. |
MARVEL 15A : 15" x 20": MARVEL 15A saw for sale :
15" x 20" rec cap
15" round cap
Fully Auto shuttle feed saw
Only two owners. Has owners manual and parts
catalog.
Holds tolerance, cuts square and is in operation
for
demo. |
|
Ad # 13389 | Fully Automatic Horizontal Band Saw |
1987 |
DOALL |
c-260a |
Good |
sold |
Photo /
More Info. |
: machine came from a local trade school that closed
program. saw is in original condition, with no
cosmetic work done to it. saw was in operation
and
under power when i purchased it. the only known
problems are 3 small coolant leaks at some
fittings. |
|
Ad # 11373 | Fully Automatic Horizontal Band Saw |
? |
DoAll |
C-260A |
Very Good |
sold |
Photo /
More Info. |
: DoAll Power Saw
Model C 260A
Auto Horizontal Band Saw
Auto Feed
18' Feed Conveyor
138" Band Length
|
|
Ad # 10442 | Fully Automatic Horizontal Band Saw |
87 ?? |
DoAll |
C260A |
Very Good |
sold |
Photo /
More Info. |
10" round capacity-w/ shuttle: fully automatic w/ shuttle feed
miters
10" round
10x12 rec part
chip auger built in
with extra transformer incl.
all power
coolant
138" blade |
|
Ad # 14152 | Fully Automatic Horizontal Band Saw |
1999 |
Danobat |
CR 330 A |
Good |
sold |
Photo /
More Info. |
12" x 13": Danobat CR 330 A
12" x 13"
12" Rounds
Fully Automatic
Hydraulic Clamping Shuttle
Twin Column
Will not run in automatic mode |
|
Ad # 12404 | Fully Automatic Horizontal Band Saw |
|
Kysor Johnson |
HA-16 400 |
Needs Work |
sold |
Photo /
More Info. |
18" x 10" Round 10": Kysor Johnson Bandsaw
Model HA 16 400
Hydralic Clamping Shuttel
18" x 10"
10" rounds |
|
Ad # 9452 | Fully Automatic Horizontal Band Saw |
96? |
DOALL |
C-4100-NC |
Good |
Sold |
Photo /
More Info. |
16in Round or 14 x 16 rectangle: Doall Bandsaw
with 186" Blade
Please verify below std specs..
Max Cutting Capacity
14 in. high x 16 in.wide (355 x 410 mm) rectangles, 16 in.(410 mm) rounds, 14 in. (355 mm) squares
Blade
Band saw blade dimensions 1-1/2 x 186 in. (41 x 4,570 mm)
Band Speed
Infinitely variable band speed drive 40-360 fpm (12-110 m/min)
Motor Capacity
Total motor capacity 12.2-hp (9.1 kw)
Band Drive
Band drive 10-hp (7.5 kw)
Hydraulics
Hydraulic system 2-hp (1.5 kw)
Band Wheels
Wheel diameter 21 in. (535 mm)
Coolant Pump
Coolant pump 1/10-hp (.075 kw)
Min Butt End
Min. butt end with automatic feed 3 in. (75 mm)
Pass Line Height
(minimum) 30-1/2 in. (775 mm)
Index Length, Single
Single automatic index length 24 in. (610 mm)
Color
DoALL Blue
Index Length, Min
Min. automatic index length 1/4 in. (6 mm)
Includes the following standard Equipment
Spring-loaded, zero clearance, carbide-faced saw guide with lead-in roller on both guide arms
Powered chip conveyor to discharge chips
Chip shovel
Coolant system integral coolant pump, coolant applied through saw guides
Flushing hose
Band door interlocks
Minimum bar end vise
Worklight mounted on control panel (60 Hz machines only)
Idler wheel motion detector stops machine automatically if band stalls in workpiece
Variable vise pressure control, with gages located by operator’s control console
Transmission oil
Random cut positioning
Rapid travel index vise control
Programmable cut length with digital readout
Complimentary coolant package
Power driven band clearing brush
Automatic workheight sensor
Blade guard
Band speed control and display at operator’s control panel
Out of stock sensor
Automatic band-kerf compensator
Saw head-rapid approach control
Instruction and parts manual
ATF hydraulic oil for wide-range temperature applications
Job selector
|
|
Ad # 11333 | Fully Automatic Horizontal Band Saw |
Late 90s |
Victor |
Auto 10H |
Good |
sold |
Photo /
More Info. |
Victor Auto 10, 2 Hp 10" x 16" capacity: Victor Auto 10H
10" x 16" Rectangle
10" round
2 Hp
220/440
Auto Feed
Auto Return
|
|
Ad # 12361 | Fully Automatic Horizontal Band Saw |
|
COSEN |
BS 250 A |
Excellent |
sold |
Photo /
More Info. |
Auto feed saw---10" rounds: MODEL BS 250 A
WILL CUT 9 X 16" or 10" rounds
Horizontal Bandsaw
MODEL MH 916-JPS 2 HP 220 3 PHASE
Approx wt: 792 lbs.
Rigid and precise blade guides for better control of the cut.
Centralized electrical controls
Hydraulic feed
Coolant system. |
|
Ad # 9376 | Fully Automatic Horizontal Band Saw |
96 |
Do-All |
C-4100NC |
Needs Work |
Sold |
Photo /
More Info. |
16 inch round --fully Automatic : Please verify below std specs..
note: the 1996 is repainted unit
Max Cutting Capacity
14 in. high x 16 in.wide (355 x 410 mm) rectangles, 16 in.(410 mm) rounds, 14 in. (355 mm) squares
Blade
Band saw blade dimensions 1-1/2 x 186 in. (41 x 4,570 mm)
Band Speed
Infinitely variable band speed drive 40-360 fpm (12-110 m/min)
Motor Capacity
Total motor capacity 12.2-hp (9.1 kw)
Band Drive
Band drive 10-hp (7.5 kw)
Hydraulics
Hydraulic system 2-hp (1.5 kw)
Band Wheels
Wheel diameter 21 in. (535 mm)
Coolant Pump
Coolant pump 1/10-hp (.075 kw)
Min Butt End
Min. butt end with automatic feed 3 in. (75 mm)
Pass Line Height
(minimum) 30-1/2 in. (775 mm)
Index Length, Single
Single automatic index length 24 in. (610 mm)
Color
DoALL Blue
Index Length, Min
Min. automatic index length 1/4 in. (6 mm)
Includes the following standard Equipment
Spring-loaded, zero clearance, carbide-faced saw guide with lead-in roller on both guide arms
Powered chip conveyor to discharge chips
Chip shovel
Coolant system integral coolant pump, coolant applied through saw guides
Flushing hose
Band door interlocks
Minimum bar end vise
Worklight mounted on control panel (60 Hz machines only)
Idler wheel motion detector stops machine automatically if band stalls in workpiece
Variable vise pressure control, with gages located by operator’s control console
Transmission oil
Random cut positioning
Rapid travel index vise control
Programmable cut length with digital readout
Complimentary coolant package
Power driven band clearing brush
Automatic workheight sensor
Blade guard
Band speed control and display at operator’s control panel
Out of stock sensor
Automatic band-kerf compensator
Saw head-rapid approach control
Instruction and parts manual
ATF hydraulic oil for wide-range temperature applications
Job selector
|
|
Ad # 11270 | Fully Automatic Horizontal Band Saw |
1988 |
Peerless |
HB915A |
Very Good |
sold |
Photo /
More Info. |
Peerless 9” x 15” Capacity: Automatic Horizontal Band Saw 9” x 15”
Automatic Stock Feed and Clamping,
Automatic Blade Feed and Retraction |
|
Ad # 14022 | Fully Automatic Horizontal Band Saw |
|
Hyd-Mech |
H 12 |
Good |
sold |
Photo /
More Info. |
S/N A0395289H: Hyd-Mech H 12
12" CAPACITY ROUND
12" X 12" CAPACITY SQUARE
1 1/4, 13'6" BLADE
16" BLADE WHEEL DIAMETER
31" TABLE
6000 LB MAX WORKLOAD
EQUIPMENT & FEATURES
PLC 100 PROGRAMMABLE CONTROL WITH LENGTH CONTROL
PROGRAM UP TO 9 DIFFERENT JOBS, PIECE LENGTH,
COUNT, AND RUN ANY ORDER
HYD. VICE CONTROL 2 HP
MULTI INDEX STANDARD
POWER BLADE BRUSH
2 RACKS
ROLL OUT TABLE
MOTOR & CONTROLS
5 HP MAIN MOTOR 22O/480 3 60 CYCLE
2 HP VICE MOTOR
PLC |
|
Ad # 14019 | Fully Automatic Horizontal Band Saw |
|
Hem Saw |
H90A |
Good |
sold |
Photo /
More Info. |
12.75 x 12.75: 12.75" X 12.75" Capacity
1" X 12'10" X .035" Blade
3 Hp Motor
Bi-Function Control
Console On Top Of Saw
0-24" Feed Stroke "Single Index"
Feed Table W/ Mechanical Digital Readout
Blade Break Switch
Out Of Stock Switch
Adjustable Blade Speed (60-300 Sfm) |
|
Ad # 15919 | Fully Automatic Horizontal Band Saw |
1995 |
Behringer |
HBP 310/403 |
Fair |
sold |
Photo /
More Info. |
12" rounds: Behringer # HBP 310/403 band saw,auto feed,
mitre cut
capacity:12.2" dia x 15.7"
1.25" blade size
motor HP.5.4 HP
Note:std mfg specs below-please verify actual machine
SpecificationDescription
Capacity - Round 90 deg.12.2"
Capacity - Rectangle 90 deg.15.7" x 12.2"
Capacity Round 45deg. Left (WxH)12.2"
Capacity Round 45deg. Right (WxH) (in.)10.6"
Capacity Rectangle 45deg. Left (WxH) (in.)
13.7" x 12.2"
Capacity Rectangle 45deg. Right (WxH) (in.)
10.6" x 12.2"
Miter Range Maximum - Left (degrees)30
Miter Range Maximum - Right (degrees)45
Saw Blade (in.)1.25"
Blade Dimensions (in.)16'5" x 1.25" x .042"
Drive Motor:5.4 HP
Cutting Speed (FPM)65 - 459
Single Stroke Length of Gripper Feed Unit (in.)
47.2"
Approx. Weight6,600 lbs
Overall Dimensions110" x 157"
Cutting capacities up to 39.3" x 31.5" * CNC
programmable length and angle setting * Large
dual column - parallel down-feed design * Fully
automatic hydraulic blade tensioning *
Horizontal and vertical material clamping *
Biased saw blade for cutting of profiles
Note : machines runs, but to get in peak
performance could use some TLC ie:minor leak in a couple hyd. fittings, vertical cylinders could stand to be rebuilt,new idler wheel,and new valve for downfeed regulator about 4-5k in parts. |
|
Ad # 11223 | Fully Automatic Horizontal Band Saw |
? |
W.F. Wells & Sons |
3 |
Needs Work |
sold |
Photo /
More Info. |
16" round and 16" x 20" rectangle: Fully Auto Feed.
16" Round Capacity. 16" X 20" Rectangle Capacity.
Coolant |
|
Ad # 12178 | Fully Automatic Horizontal Band Saw |
2002 |
Hydmech |
S20A |
Good |
sold |
Photo /
More Info. |
18x20: |
|
Ad # 9313 | Fully Automatic Horizontal Band Saw |
2000 |
Kasto |
A5 |
Good |
SOLD |
Photo /
More Info. |
21" round CNC: German built, CNC Conversational Control, Bundle option,
Demo no problem.
Cutting range round 20.8"
Cutting range square H x W 20.8" x 20.8"
Cutting range flat H x W 20.8" x 24.8"
Cutting range bundle H x W 20.8" x 24.8"
Clamping range 0 – 24.8" mm
Automatic material feed length, single stroke 23.62"
Automatic material feed length, multiple stroke 32.8'
Material support height 27.55" mm
Power of saw motor 5.5 kW
Cutting speed infinitely variable with 50 or 60 Hz 12 – 120 m/min |
|
Ad # 9310 | Fully Automatic Horizontal Band Saw |
1988 |
Kasto |
HBA 360AU |
Good |
SOLD |
Photo /
More Info. |
14" Round Automatic: German built quality, Demo no problem, 13.5" round, 1&5/8" Blade, 17.5' Bla... |
|
Ad # 9309 | Fully Automatic Horizontal Band Saw |
1995 |
Kasto |
HBA 660AU |
Good |
SOLD |
Photo /
More Info. |
26" round: German built quality, Demo no problem, PC equipped, 26" round, 2&5/8" Blade... |
|
Ad # 15173 | Fully Automatic Horizontal Band Saw |
1990 |
Do All |
C-70 |
Excellent |
sold |
No Photo /
More Info. |
12 X 16: Do All C-70 fully automatic horizontal band saw.
Can be run manually or semi automatic.
Has coolant extra parts blades and has been gone
thru top to bottom
|
|
Ad # 16115 | Fully Automatic Horizontal Band Saw |
2005 |
Acra |
HL-250 |
Good |
sold |
Photo /
More Info. |
9 x 10": Acra HL-250 fully automatic feed band saw
9" X 10" USED ACRA HORIZONTAL AUTOMATIC BANDSAW MDL. HL-250, BLADE GUIDE, CHIP CONVEYOR, HYDRAULIC VISE, PIECE COUNTER, BLADE TENSIONER, QUICK APPROACH DEVICE, MOTION DETECTOR,
Rectangular 9" x 10 5/8"
Round Diameter 10" Round
Blade Size 1.25"
Blade Speed 80 -328 FPM
Machine Dimensions LxWxH 76"x82"x56"
Drive Motor 3 HP
Machine Weight 2425 lbs
Equiped with
Automatic hyd top Clamping
3 Ft. Infeed Feeder Table
Chip Auger
Variable Speed Coolant
3 HP 220V 3 Phase |
|
Ad # 13895 | Fully Automatic Horizontal Band Saw |
1992 |
Do-All |
C305-NC |
Good |
sold |
Photo /
More Info. |
12" x 12" DoAll C-305NC Programmable Automatic Horizontal Bandsaw: Do-All C305-NC fully automatic shuttle feed band saw
Width capacity: 12"
Height capacity: 12"
Year of Manufacture: 1998
Manufacturer: Doall
Model: C-305NC
Condition: Used
12" x 12" DoAll Model C-305NC Programmable Automatic Horizontal Band Saw
EQUIPPED WITH:
GE Fanuc Series 90/30 PLC Controls. Programmable Control With 20-Job Memory Capacity And Display. Automatic Cut Cycle. Multiple Index Up To 999" Variable Hydraulic Pressure Control To Both The Clamping And Feed Vises. Chip Auger. Coolant. Piece Counter. Discharge Tray. Work Light.
SPECIFICATIONS:
Cutting Capacity: Round 12"
Cutting Capacity: Square 12" x 12"
Blade Size 1-1/4" x 144"
Blade Drive 5 HP
Blade Speed (Variable) 60-450 FPM
Single Automatic Index Length 0-16"
Maximum Multiple Index Length 999"
Approximate Weight 4500 lbs
includes 5ft infeed conveyor shown
Notes: machines was in good running condition when recently taken out of service-just needs a good cleaning.. |
|
Ad # 14556 | Fully Automatic Horizontal Band Saw |
1989 |
Kasto |
HBA420AU |
Fair |
sold |
Photo /
More Info. |
16.5" rounds or 16.5" x 16.5 rec: Kasto Auto feed Horizontal band saw # HBA420AU
capacity:16.5" rounds or 16.5" x 16.5
rectangle
1.5" blade width
7.5HP motor - NEW MOTOR
smallest possible cut-off length:0.24"
min cut dia:0.4"manual mode,3.1" auto
mode
single stroke mtl feed: 23.6"
multi index feed max:212.6"
speed range: infi variable:65-426 in/min
cut feed infi variable
hyd vise feed system
clamp pressure-infi variable
carbide guides
hyd blade tensioner
coolant 35gal tank
chip auger
all manuals included
loading/rigging fee $800.00 |
|
Ad # 10069 | Fully Automatic Horizontal Band Saw |
2002 ?? |
Hyd-Mech |
S-23A |
Good |
sold |
Photo /
More Info. |
@ 90deg. 16x18 rectangle, 16"round: Hyd-Mech standard Specifications-please verify
Model No.
S-23A
Capacity
90° Rectangle:
90° Round:
45° Rectangle:
45° Round:
16" x 18"
16" diameter
16" x 10"
12" diameter
406 mm x 457 mm
406 mm diameter
406 mm x 254 mm
305 mm diameter
Blade
Length:
Width:
15’6"
1 1/4"
4724 mm
32 mm
Blade Speed: 75-350 SFM
(vfd)
22-107 m/min
(vfd)
Blade Guides: Carbide Carbide
Blade Wheel Diameter: 19" 483 mm
Blade Drive:
Hydraulic Drive:
5 hp
1 hp 3.7 kW
.75 kW
Hydraulic System:
500 psi
3450 kPa
Hydraulic Tank Capacity: 10 U.S. Gallons 46 litres
Coolant Tank: 6 U.S. Gallons 23 litres
Vise Control: Hydraulic Hydraulic
Table Height: 31" 787 mm
Maximum Work Load: 5,000 lbs 2268 kg
Machine Weight: 3,400 lbs 1543 kg
Dimensions: 97" wide
80" long
63" high 2462 mm wide
2031 mm long
Standard Features
--------------------------------------------------------------------------------
Extremely heavy-duty guide arms and cast iron wheels
Full stroke vises
Positive down-feed
Blade breakage switch
Powered blade brush
Hardened and replaceable wear strips
Carbide guides
Heavy-duty gearbox and motor assembly
Easy access servicing panels
Wash down hose
Readily available and easy-to-replace parts
Options-available
-available -please verify below..
--------------------------------------------------------------------------------
Hydraulic overhead bundling clamp
Worklight
Variable vise pressure
Outfeed stop
Mitsubishi PLC 100
Out of stock switch
The S-23A has a powerful 5HP, variable frequency drive system that provides exceptional cutting performance on a variety of material. The upgrade to the S-23A PLC model enables the operator to program up to 999 jobs with 10 jobs in queue and provides a shuttle length up to 500". The S-23A is solidly built to give you maximum productivity.
|
|
Ad # 10056 | Fully Automatic Horizontal Band Saw |
1996 |
Master cut |
H-360-HA |
Good |
sold |
Photo /
More Info. |
14" plus Fully Automatic w/ vise shuttle: Fully Automatic W/ vise shuttle
14" plus rounds ,16" max
5HP
14 x 15 rectangles..
Vari speed drive-reeves
1-1/4" blade
coolant
chip auger
muli vise shuttle
20" stroke on shuttle |
|
Ad # 15058 | Fully Automatic Horizontal Band Saw |
2012 |
Cosen |
C-420NC |
Good |
sold |
Photo /
More Info. |
16.5" rounds: 2012 Cosen Model: C-420NC
NC Programmable Automatic Twin Column Horizontal
Bandsaw
230v/60HZ/ 3-Phase
With Chip Conveyor and Roller Table
Note: std mfg specs below-please verify actual machine..
Cosen's C-420NC, incorporates a 7.5hp (10 hp optional) powerful blade motor, 1 ½” wide blade,
independent control panel, and heavy-duty dual column design. These features create a very rigid,
dynamically stable and productive machine. The oversized precision ground columns ensure smooth
saw frame movement and the consistently stable cutting force required throughout the cutting cycle,
thereby increasing the cutting efficiency and extending blade life. As with all Cosen column type machines, this saw has a .50 kant.
Cosen now offers the latest in Touch Screen Control Technology, SNC-100. Coupled with a Mitsubishi PLC controller the 5.7” Color Touch Screen allows for fast easy programming of any job. Utilizing the SNC-100 System the operator easily programs the cut length and quantity desired. The SNC-100 System stores up to 100 cutting jobs and features Automatic Kerf Compensation for parts longer than a single index. The SNC-100 System also utilizes “Save-A-Blade” which retracts the material
1/8” from the blade at the end of each cut so the blade will not rub the material while the saw head moves up to allow the next index. All machine functions are controlled from the operator’s station.
The control panel is ergonomically designed and located for convenient use by the operator. Any
length of cut desired up to 999”can be selected.
MACHINE SPECIFICATIONS
Maximum Cutting
Capacity:
Round:16.5"
Square:16.5” x 16.5"
Rectangle (w x h)16.5" x 16.5"
Bundle (w/ opt. Top clamp)
7.5” x 4” min. 14” x 7” max.
Blade: Speed Variable: 49 – 328 fpm
blade sise:1 ½ ” x 15’8” x .050”
4770mm x 41mm x 1.3mm
Carbide guides
Motor: Hydraulic 10 hp
Automatic Material Feed
System:
Job Storage
Single Index Stroke
Multiple Stroke Indexing
Up to 100 jobs
0" to 19.750 "
0" to 999" (featuring automatic kerf
compensation)
Weight 7,260 lbs.
Power 230V, 3 ph, 60 Hz
Shipping Dimensions 107” x 90” x 80”
Floor Space (L x W x H) 93" x 98" x 68"
Bed Height 27.5” (700mm)
MACHINE FEATURES
Machine Structure:
► Oversized Precision ground, large Dual Columns support and guide the rugged saw head
through the entire cutting cycle. The saw head adopts a back tilt design which allows the
blade to twist less than traditional bandsaws between the wheel and blade guide; thereby
putting less stress on the blade, insuring longer life.
► The oversized round columns provide hundreds of square inches of continuous surface
contact with the sawhead throughout the entire cutting process.
► Cross Link is located on the top of the columns, connecting the two columns to form an
archway design that gives it sound structural strength.
► Hydraulic shuttle vise assembly, made of heavy-duty cast iron with replaceable hardened
wear plates, rides on two large guide shafts that are capable of handling extreme loads.
Both shafts are ground and chrome plated for durability and smooth material feeding.
Blade Drive:
► The gearbox is specially designed to accept high lateral pressure. Unlike conventional
gearboxes, the Cosen design accepts more pressure during operation and will not create
thermal distortion, providing long gearbox life under production conditions.
► Inverter blade drive system allows infinitely variable blade speeds to be controlled by the
operator from the control panel with turn of a knob. The system comes standard with
LED readout for convenient and accurate setting of blade speed.
Blade Guidance & Lubrication System:
► Cam lock carbide blade guides enable unsurpassed blade support and ease of blade
changes. Carbide guides securely guide the blade during the cutting cycle. Also, the
carbide is relieved so that coolant can both cool and lubricate the blade during the cut.
► The bearing guides eliminate blade stress by pre-aligning the blade before it enters the
carbide guides. Two additional guides located on a central axis support the blade from the
top, giving it extra penetrating force for faster cuts.
► Automatic hydraulic blade tensioning device provides correct blade tensioning when the
machine is turned on and will slightly release the tension when the machine is not
running. This extends blade life. The on-off hydraulic valve switch is an added feature
making blade change quicker and easier
► Integral coolant system. Coolant is supplied at four critical points: exit & entry of blade
through blade guides, middle of cut, and blade cleaning brush.
Synchronized power driven blade brush effectively cleans chips from blade to extend
blade life.
Control & Automation:
► Smart NC-100 (SNC100) technology provides most of the benefits of NC controlled
saws at a mere fraction of the cost. SNC100 controls are programmable up to 100
different jobs including quantity and length of cut. The control automatically compensates
for Kerf loss after data input and requires no manual calculation of number of times to
index. The control also automatically shutdowns the machine, blade motor, and
hydraulics, once the programmed number of cuts or out of stock situation has been
achieved. The system includes an error feedback function enabling rapid troubleshooting
through an error code to be displayed in the event of a malfunction.
► SNC-100 Features include:
5.7” Touch screen
Mitsubishi PLC controller
100 individual jobs can be programmed and stored
Stored program(s) may be easily recalled and executed at Will.
Blade Speed Display
Motor amp draw (optional)
Optional Blade Deviation Detection monitor can be controlled directly from Touch
Screen
Automatic Kerf Loss Compensation & Automatic Multiple Indexing up to 999”
Save-a-Blade Feature - The shuttle vise will automatically retract the material
slightly after cut-off, so a blade can avoid the undesirable abrasion with material,
improving cutting tool life.
Error Code Display Provides simplified self-diagnostics.
Blade life timer.
► Precision feed pressure & feed rate dual valve system for optimal cutting performance in
any material.
Selector Switch for bundle or single cutting modes
► Automatic work height sensor and air gap eliminator positions the saw frame to a safe
clearance above the work piece, so that the next piece can be positioned without
damaging the blade. After feeding, the saw head will descend quickly to within
approximately 1/8" of work piece, where it proceeds at the predetermined cutting rates.
Material Clamping & Feeding:
► Split vise jaws on the front machine vise are standard. The split front vise will hold the
work piece on both sides of the blade for a burr-free cut. This system also features
automatic feeding of material down to a remnant length of 3.5".
► Double retracting vise jaws. Both jaws of the index vise open (retract) and close assuring
smooth material feeding, especially helpful for misaligned or cambered material.
► Full stroke hydraulic front and rear vises enable clamping and unclamping of any material
from the operator’s control station with touch of a button.
► Ductile cast iron vise with replaceable hardened wear plates.
► Smart NC Controlled Multiple indexing for long cutting lengths of up to 999” maximum
length, utilizing full shuttle length every index until desired length is reached.
One set of vertical alignment rollers, which is convenient for bundle cutting and
positioning bar stock, is standard and is located on the machine base.
Multiple horizontal rollers strategically located throughout the saw to facilitate smooth
material feeding.
Discharge Table with built–in coolant return adequately supports cut-off stock and
provides coolant savings in the long run.
Safety:
► Proximity switches sense both blade slippage and blade breakage and will automatically
shut off the machine if either of these conditions should occur.
► All blade covers, and guarding on the saw are painted Alert Orange to increase safety
alertness.
All exposed electric wiring and hydraulic circuit are protected by conduits.
Electrical and hydraulic safety interlock prevents saw blade to start without vises securely
clamped.
Accessories:
► Blade “clip” device eases blade changing when necessary by holding the blade on the
band wheel during installation, making it very easy for one person to change the blade.
► Adjustable fence to support bundled cut-off stock
Additional flushing hose for cleaning
Built in work light
Note: currently sells new for $39,895.00
|
|
Ad # 13132 | Fully Automatic Horizontal Band Saw |
1992 ? |
Do-all |
C305NC |
Good |
sold |
Photo /
More Info. |
12" round-fully automatic w/ shuttle: Do-All C305NC horizontal band saw
12" x 12" rectangular
12"rounds
blade speeds: 60-350
control: GE Fanuc Series 90/30 PLC
auto shuttle w 16" stroke
hyd clamp & feed vises
index length length control w dro
auto cycle start
manual joystick for saw head up-hold and auto down
5hp main motor
auger chip conveyor
out of stock
144"x1.25"x.035"blade,
18'back rollers,65" front rollers |
|
Ad # 9145 | Fully Automatic Horizontal Band Saw |
1963 |
DoAll |
C-70 |
Good |
sold |
Photo /
More Info. |
12' X 16" rec..12-3/4 in round ;Auto roller feed: 1963 DoAll Model C-70 Horizontal Band Saw.
Std. Spec -please verify..below
HYDRAULIC VISE, BLADE TENSIONING, CARBIDE BLADE GUIDES, FEED-UP TABLE, COOLANT
Specification Description
CAPACITY 12" X 16" RECT; 12 3/4" ROUND
WHEELS 16" DIA.DOUBLE BALL BEARINGS
BLADE SIZE 1" X 144" X .035"
SPEED RANGE, VARIABLE 60 TO 350 FPM
FEED CONTROL VARIABLE/AUTOMATIC
MAIN DRIVE MOTOR 5 HP
FLOOR AREA 109" X 120" X 88" HT
APPROX WEIGHT 4500 LB
|
|
Ad # 11816 | Fully Automatic Horizontal Band Saw |
|
Do-All |
C70 |
Fair |
sold |
Photo /
More Info. |
13" round cap: Do-all C-64 fully auto matic shuttle feed saw
13" round capacity
1-1/4" blade
0-24" stroke on shuttle
|
|