| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 4348 | Horizontal Mills |
| — |
Nicols |
— |
Good |
Sold |
Photo /
More Info. |
| HORIZONTAL KNEE MILL WITH OVERARM ARBOR SUPPORT: Table: 8.5" x 30"
Motor: 2.2 hp
Power Feed In X?
With vice and all cutters (as shown in Photographs) |
|
| Ad # 4349 | Horizontal Mills |
| — |
Cincinatti |
— |
— |
sold |
Photo /
More Info. |
| HORIZONTAL KNEE MILL w. OVERARM ARBOR SUPPORT: Table: 12" x 34.5"
Includes: Coolant pump (coolant integrated within base casting)
16 different arbors (two still new in box)
Also has some spare gears and shafts (Machine came out of a Government facility) |
|
| Ad # 15393 | Horizontal Mills |
| 1950's |
Elgin |
HM-5C |
Good |
sold |
Photo /
More Info. |
| Table: 18" x 4": Horizontal Mill (mini)
Make: Elgin
Model: HM-5C
Capacity: table - 18" x 4"
Electrical: 220/3 phase
This is a very handy small sized horzontal
mill. perfect for the hobby user at home with
limited space or a small shop that does not
need a large mill.
|
|
| Ad # 15393 | Horizontal Mills |
| 1950's |
Elgin |
HM-5C |
Good |
sold |
Photo /
More Info. |
| Table: 18" x 4": Horizontal Mill (mini)
Make: Elgin
Model: HM-5C
Capacity: table - 18" x 4"
Electrical: 220/3 phase
This is a very handy small sized horzontal
mill. perfect for the hobby user at home with
limited space or a small shop that does not
need a large mill.
|
|
| Ad # 15376 | Horizontal Mills |
| 1954? |
Kearney & Trecker |
5 HP - 2 CH |
Good |
sold |
Photo /
More Info. |
| Table Size: 12" x 50" with arbor support: Horizontal Mill with arbor support
Make: Kearney & Trecker
Model: 5HP - 2CH
Capacity: Table 12" x 50"
Electrical: 230/3 phase |
|
| Ad # 15376 | Horizontal Mills |
| 1954? |
Kearney & Trecker |
5 HP - 2 CH |
Good |
sold |
Photo /
More Info. |
| Table Size: 12" x 50" with arbor support: Horizontal Mill with arbor support
Make: Kearney & Trecker
Model: 5HP - 2CH
Capacity: Table 12" x 50"
Electrical: 230/3 phase |
|
| Ad # 15371 | Horizontal Mills |
| ? |
Cincinnati |
#4A |
Good |
sold |
Photo /
More Info. |
| 16" x 80" table: Cincinnati Horizontal mill # 4AP1P-7
table size: 16" x 78"
power feeds table x & y
horizontal arbor support
12" vise
18-1300 spindle rpm
2 tool holders |
|
| Ad # 8006 | Horizontal Mills |
| 1976 |
SUMMITT |
3UH |
Needs Work |
Sold |
Photo /
More Info. |
| 12.75" x 60" Table Horizontal Mill: Machine runs ok but only feeds in one direction. Could need a solenoid or a... |
|
| Ad # 12843 | Horizontal Mills |
| N/A |
Cincinatti |
C-935 |
Good |
sold |
Photo /
More Info. |
| 18" x 6": Cincinatti Horizonal Mill
Model C-935
8" Travel
Manual Control
Table Size 18" x 6"
Have 2 Identical Mills for SALE |
|
| Ad # 13649 | Horizontal Mills |
| — |
Nichols |
Hand Mill |
Good |
sold |
Photo /
More Info. |
| —: Nichols Hand Mill with Cam Milling Attachment |
|
| Ad # 14323 | Horizontal Mills |
| — |
Cincinnati |
Milacron, Hydromatic |
Good |
sold |
Photo /
More Info. |
| —: 4/36
52" x 16" Table
Tooling |
|
| Ad # 12746 | Horizontal Mills |
| — |
Cincinnati |
No 4 |
Good |
sold |
Photo /
More Info. |
| 16" x 80": Cincinnati No 4 Mill
16" x 80" Table
Power x and y Feeds
18-1300 RPM |
|
| Ad # 12702 | Horizontal Mills |
| Unknown |
Barker |
PM |
Good |
sold |
Photo /
More Info. |
| 4"x12"x3": Hand lever feeds to head, saddle and table motion with adjustable positive ... |
|
| Ad # 5264 | Horizontal Mills |
| — |
Kent Owens |
1177 |
Fair |
sold |
Photo /
More Info. |
| Kent Owens Horizontal Mill: 1" arbor
Electric spindle
Hydraulic Table measures 6"x22"
Energy Mfg. Hyd. Pump |
|
| Ad # 12652 | Horizontal Mills |
| — |
Burke |
128A |
Good |
sold |
Photo /
More Info. |
| —: Horizontal mill that we purchased, but never installed for use. Was working... |
|
| Ad # 12625 | Horizontal Mills |
| — |
Brown & Sharpe |
Fully Auto |
Good |
sold |
Photo /
More Info. |
| 7" x 32": Brown and Sharpe
Cat 40 Taper
7" x 32" Table
Voltage 220
25-1000 RPM
Fully Automatic X,Y,Z |
|
| Ad # 13492 | Horizontal Mills |
| — |
Kearney & Trecker |
1H-18 |
Good |
sold |
Photo /
More Info. |
| Kearney & Trecker Horizontal Mill: Kearney & Trecker Horizontal Mill
Model 1H-18
Very well built.
Can be run 3 phase
Converter included to run on single phase.
Mill table moves in and out, up and down, and
side to side.
Mill functions properly.
Auto feed and multi speed function properly
Items that come with the mill are:
Phase converter
Two end mills - one is pictured
End mill holder - in picture
Vise
Can load
Still in service
|
|
| Ad # 7856 | Horizontal Mills |
| 1951 |
Cincinnati |
0-8 Rise & Fall Production MIl |
Very Good |
Sold |
Photo /
More Info. |
| Rise & Fall Mill -Production: Cincinnati production mill 0-8 Rise & Fall, table working surface 6 1/2" x ... |
|
| Ad # 1982 | Horizontal Mills |
| 60's |
K & Trecker |
10HP-2CK |
Good |
sold |
Photo /
More Info. |
| Manual Horizontal Mill: 10 HP
Table: 56" x 13"
Travels: 30" x 12" approx.
Includes Misc,. tooling
15-1500RPM
Std specs below -please verify
TABLE _______________________________________________________ 13-1/2" X 56"
SPINDLE TAPER________________________________________________ # 50
SPINDLE SPEEDS ( 24 )__________________________________________ 15-1500 RPMS
FEEDS ( 32 )___________________________________________________ 3/8" - 90" IPM
TABLE TRAVEL_________________________________________________ 32"
CROSS TRAVEL_________________________________________________ 14"
MAXIMUM HEIGHT UNDER SPINDLE________________________________ 17"
VERTICAL HEAD TRAVEL_________________________________________ 5"
MAIN MOTOR__________________________________________________ 10 HP
MOTOR KNEE__________________________________________________ 3 HP
|
|
| Ad # 6516 | Horizontal Mills |
| — |
K&T Milwaukee |
315-16 |
Good |
SOLD |
Photo /
More Info. |
| 16" x 74" K&T Horizontal Milling Machine: Table: 16" x 74"
Spindle Speed: 15 - 1,500 rpm
Spindle Size: CAT 50
Some Cutters included
Some arbors included |
|
| Ad # 1955 | Horizontal Mills |
| ? |
Nickols |
U36 |
Fair |
Sold |
Photo /
More Info. |
| Small Manual horiz Mill: Manual head & table movement. |
|
| Ad # 5130 | Horizontal Mills |
| — |
Nichols |
— |
Very Good |
Sold |
Photo /
More Info. |
| Nichols Horizontal Production Mill: Table: 24" x 7'
Note: This is a "half" table - the casting is machined so that an extension table can be added to increase length
Over-Arm Support: 20"
Spindle: CAT 40
Coolant System |
|
| Ad # 6377 | Horizontal Mills |
| — |
Brown & Sharpe |
# 2 |
Good |
Sold |
Photo /
More Info. |
| Horizontal Milling Machine, Model # 2: Brown and Sharpe # 2 horizontal mill with standard equipment and exta arbor... |
|
| Ad # 6351 | Horizontal Mills |
| — |
Cincinnati |
No. 3 |
Good |
Sold |
Photo /
More Info. |
| 54" X, 15"Y: Travels-54" X, 15" Y, NEW 10 HP motor,230/460 volts, 18-450 RPM, includes m... |
|
| Ad # 11380 | Horizontal Mills |
| — |
cincinnati |
no 4 |
Good |
sold |
Photo /
More Info. |
| 16" x 76" Table: Cincinnati Horizontal Milling Machine Model No. 4 Dual
Cincinnati Horizontal Milling Machine
Table Travels, Longitudinal: 42"
Max. Distance Spindle Center to Table Top: 20"
Spindle Speeds: 16 - 1,600 RPM
Table Feed Rates: 3/8 - 90 In/Min
Max. Cutter Dia. w/Overarms: 15inch |
|
| Ad # 12403 | Horizontal Mills |
| 1982 |
Supermax |
YC |
Good |
sold |
Photo /
More Info. |
| 11" x 52": Supermax Series II Horizontal mill
49-1300 RPM
Power X and Y
11" x 52" Table
|
|
| Ad # 7701 | Horizontal Mills |
| 1977? |
Cincinnati |
# 2 |
Good |
Sold |
Photo /
More Info. |
| Cincinnati # 2 Horizontal Mill with Over Arm Arbor Support: Table: 10: x 52"
Overarm Arbor Supprt |
|
| Ad # 14097 | Horizontal Mills |
| 1950's |
Karney & Treck |
— |
Good |
sold |
Photo /
More Info. |
| 45"x16": This is a Navy machine that is still a good running machine. Is
capable of holding two thousands of an inch over the 45" of travel.
Table measures 75"x 22". Machine is being used on a daily basic.
Will send a video of machine running upon request. |
|
| Ad # 1010 | Horizontal Mills |
| — |
Millwuake |
1H-12 |
Good |
Sold |
Photo /
More Info. |
| Small Horizontal Mill: table size 33" x 14";includes change gears |
|
| Ad # 13304 | Horizontal Mills |
| — |
Nichols |
Horizontal |
Good |
sold |
Photo /
More Info. |
| 7" x 21": Nichols
Horizontal Mill
Slotting Mill
Single Op.
7" x 21" Table |
|
| Ad # 380 | Horizontal Mills |
| — |
Cincinnatti |
08 |
Fair |
Sold |
Photo /
More Info. |
| Horizontal Mill: Production mill/rise and fall with parts counter |
|
| Ad # 7600 | Horizontal Mills |
| — |
K&T Milwakee |
Model H, # 3 |
Fair |
Sold |
Photo /
More Info. |
| Model H, # 3 K&T Horizontal Mill: Table: 47" x 9" |
|
| Ad # 7597 | Horizontal Mills |
| — |
Nickols |
21 x 7 Table |
Good |
sold |
Photo /
More Info. |
| Nickols 21" x 7" Table Horizontal Mill w. Arbor Support: Table: 21" x 7"
machine runs well
hand feed acc crank added
|
|
| Ad # 11172 | Horizontal Mills |
| — |
Nickols |
7R |
Good |
sold |
Photo /
More Info. |
| —: Rise & fall horizontal mill
|
|
| Ad # 11173 | Horizontal Mills |
| — |
Burke |
126A |
Good |
sold |
Photo /
More Info. |
| 20" x 4" table: Burke
126A Horizontal mill
20" x 4" table
step pully speed control |
|
| Ad # 11174 | Horizontal Mills |
| — |
Barker |
PM |
Good |
sold |
Photo /
More Info. |
| —: 12" x 4" table
step pully speed change
includes 2 hydra check cylinders -not connected for
speed control
coolant
cycle start switch box
3/4" HP |
|
| Ad # 7586 | Horizontal Mills |
| — |
Cincinnati |
Model # 3 |
Very Good |
SOLD |
Photo /
More Info. |
| Cincinnati # 3 Horizontal Mill: Table: 64" x 16"
Built-In "Feed/Speed" Calculator |
|
| Ad # 15176 | Horizontal Mills |
| — |
Cincinnati |
Hydro-Mtic 4-36 |
Good |
sold |
Photo /
More Info. |
| 48 x 18: Manufacturer - Cincinnati
Model: Hydro-Matic Duplex Horizontal Mill, 4-
36
Age, Serial No.: Unknown
Spindle Speeds: 15 - 113 RPM
Table: 48 x 18
Dimensions: 7' x 8'
Weight: Estimate 7,000 - 8,000 lbs
Condition: Has been taken out of production
and is
now surplus; machine is operational; no
tooling comes
with machine; pictures are indicative of what
comes
with machine.
Machine is not under power and available for
inspection.
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
| Ad # 859 | Horizontal Mills |
| 1964 |
Milwaukee/K & T |
# 4 Plain-H |
Good |
Sold |
Photo /
More Info. |
| Heavy Duty Horizontal Mill: 50 Taper; 16 x 74" table
travels:42" x 16" |
|
| Ad # 12081 | Horizontal Mills |
| — |
Kearney & Trecker |
310 S- 15 |
Good |
sold |
Photo /
More Info. |
| 15" x 68" Table: KEARNEY & TRECKER 310-S-15
Table Working Surface: 68" X 15"
Feed Range: 34" Longitudinal
12" Cross
17" Vertical
Spindle Speeds: (24) 25 To 2000 Rpm
Spindle Nose: No. 50 Nst
Feed Rates: (32) 3/8 To 90 Ipm
Longitudinal/Cross
(32) 3/16 To 45 Ipm Vertical
Rapid Traverse Rates: 150 Ipm Longitudinal/Cross
75 Ipm Vertical
Centerline Spindle To Table Top: 17-7/8" Maximum
0" Minimum
Spindle Motor: 10 Hp
Feed Motor: 3 Hp
Coolant Pump Motor: 1/4 Hp |
|
| Ad # 12081 | Horizontal Mills |
| — |
Kearney & Trecker |
310 S- 15 |
Good |
sold |
Photo /
More Info. |
| 15" x 68" Table: KEARNEY & TRECKER 310-S-15
Table Working Surface: 68" X 15"
Feed Range: 34" Longitudinal
12" Cross
17" Vertical
Spindle Speeds: (24) 25 To 2000 Rpm
Spindle Nose: No. 50 Nst
Feed Rates: (32) 3/8 To 90 Ipm
Longitudinal/Cross
(32) 3/16 To 45 Ipm Vertical
Rapid Traverse Rates: 150 Ipm Longitudinal/Cross
75 Ipm Vertical
Centerline Spindle To Table Top: 17-7/8" Maximum
0" Minimum
Spindle Motor: 10 Hp
Feed Motor: 3 Hp
Coolant Pump Motor: 1/4 Hp |
|
| Ad # 10206 | Horizontal Mills |
| 1968 |
Cincinnati |
DL 500-266 |
Very Good |
Sold |
Photo /
More Info. |
| 72" travel : 30" x 96" table w/ lots of cutters: table size: 30 x 96"
travel-72"
top of table to center line of spindle-0-36"
quill Dia-10"
Quill adj-3"
spindle speeds-32
10-400 RPM
20-800RPM
table feeds-infi variable-1.4 to 100IPM
rapid traverse-100IPM
Main motor 15/30 HP
2 arbor supports 3" bore
auto table feed cycles
auto spindle stop
table control for reciprication 2 way feed cycles
lub system
flood coolant sys.
all manuals
Lots of tooling cutters
|
|
| Ad # 4650 | Horizontal Mills |
| 1968 |
Kearney & Trecker |
#550 TF-20 |
— |
Sold |
Photo /
More Info. |
| Kearney & Trecker wide knee twin screw plain horizontal mill: Item # 3219 -- Basic Information
Category
Mills, Keyseaters, Jig Borers
Sub-Category
Mills, Manual Horizontal
Manufacturer
KEARNEY & TRECKER
Model
#550 TF-20
Year
1968
Size
#5
FOB
F.O.B. Truck, Wilmington, DE
Price
$ 14500.00
Item # 3219 -- Full Description
#550TF-20 KEARNEY & TRECKER Wide Knee Twin Screw Plain Horizontal Mill with H.D. Vertical Milling Attachment, (New 1968)
Table working surface: 19-1/2" x 96"
Range - longitudinal: 50"
cross: 16"
vertical (knee): 21"
Taper in spindle: No. 50
24-Spindle speeds: 15 to 1500 RPM
32-Feeds - longitudinal & cross: 3/8 to 90 IPM
vertical: 1/8 to 30 IPM
Rapid traverse rate: 150 IPM
EQUIPPED WITH:
H.D. right angle swivel milling attachment
Mono-lever and automatic cycle table with (7) table dogs
Milling vise
Twin screw knee with hardened ways
Front mounted table handwheel
Power rapid traverse
(1) Arbor support
(1) Arbor with cutter
Manual draw bolt
Coolant
Motor Amp meter
Rear controls
5 H.P. feed motor
50 H.P. 3/60/220-440 volt main drive motor w/controls
Machine wired for 3/60/440 volt operation
Approx. total weight: 18,200 lbs.
Dimensions: 112-1/2"LR x 112"FB x 75"High
PRICE: F.O.B. TRUCK, WILMINGTON, DE.................................$14,500.00
|
|
| Ad # 4648 | Horizontal Mills |
| 1988 |
CINCINNATI-MILACRON |
#207 MK |
Excellent |
SOLD |
Photo /
More Info. |
| #207 MK CINCINNATI-MILACRON Plain Dial Hrizontal Mill: Item # 3997 -- Basic Information
Category
Mills, Keyseaters, Jig Borers
Sub-Category
Mills, Manual Horizontal
Manufacturer
CINCINNATI-MILACRON
Model
#207 MK
Year
1988
Size
#2
FOB
Wilmington, DE.
Price
$ 14500.00
Item # 3997 -- Full Description
#207 MK CINCINNATI-MILACRON Plain Dial type horizontal mill with double-swivel vertical attachment, Model EDR, new 1988
Table working surface 13.75” x 59.5”
Range
longitudinal 33.5”
cross 13.72”
vertical (knee) 18.75”
Maximum distance, spindle center to table 18.75”
Spindle nose (horizontal) No. 50 standard
Spindle nose (vertical) No. 40 standard
16 spindle speeds 25-1500 RPM
16 longitudinal and cross feeds ½-60 IPM
16 vertical feeds ¼-30 IPM
Rapid traverse rate
longitudinal and cross 150 IPM
vertical 75 IPM
EQUIPPED WITH:
Angular double-swivel vertical milling attachment with No. 40 taper, manual draw-bolt and accessory hinge for storage
Hardened knee
3-axes automatic table cycle control
Dual-inch/metric dials
Side controls
Horizontal manual draw-bolt
Dynapoise overarm with (3) arbor supports
Low lead attachment with box, adapters, 16 change gears
Hofmann dividing head, tailstock and work support with (2) index plates, 8” diameter 3-jaw chuck, 5” center height
Trak 102-2-axes digital readouts
Power rapid traverse
Simple pendant control
Coolant system
Work light
(3) No. 50 arbors with spacers
(1) No. 50 cutter holder
(14) No. 40 end mill holders
(7) No. 40 cutter holders
5.5 H.P. feed motor
7.5 H.P. 3/60/575 volt main drive motor with controls
Transformer for 3/60/230 or 460 volt input
Condition: excellent
Approximate weight: 6,800 lbs.
Floor space required: 101”LR x 105.5”FB x 66”High
Price: F.O.B. Truck, Wilmington, DE................................$14,500
|
|
| Ad # 9253 | Horizontal Mills |
| — |
Cincinnati |
— |
Fair |
sold |
Photo /
More Info. |
| 14 x 53 table-50 taper: 53 x 14 " table
50 taper spindle
needs clutch adjusted-slips, still cuts on
lighter cuts but slips on heavy cuts
but runs good other than clutch needs minor
work/adjusting.
rigging / loading fee 700.00 |
|
| Ad # 142 | Horizontal Mills |
| 1954 |
K & T |
10HP-2CK |
Fair |
sold |
Photo /
More Info. |
| Horiz-Vert mill : Horiz mill w/ vert attachment |
|
| Ad # 10186 | Horizontal Mills |
| 1968 |
CINN |
DL500-266 |
Very Good |
Sold |
No Photo /
More Info. |
| TABLE-30"X96": WORKING SURFACE OF TABLE-30"X96"
TABLE TRAVEL 72"
TOP OF TABLE TO CENTER LINE OF SPINDLE 0-36
RAPID TRAVERSE
|
|
| Ad # 12020 | Horizontal Mills |
| — |
Cincinnati |
No 4 |
Good |
sold |
Photo /
More Info. |
| Travels, 42" x 14" x 20" vertical: Cincinnati No 4 Horizontal Milling Machine
80" x 18" Table
Travels, 42" x 14" x 20" vertical
Speeds, (32) 16-1600 rpm
Spindle taper, #50
30 hp.
Coolant
220V 3 Phase |
|
| Ad # 44 | Horizontal Mills |
| — |
Hitachi-Seike |
Horiz mill # 2MCP |
Fair |
sold |
Photo /
More Info. |
| Horizontal manual mill: Now PRICED TO SELL QUICKLY!! |
|
| Ad # 13797 | Horizontal Mills |
| — |
STORM VULCAN |
85 B |
Good |
sold |
Photo /
More Info. |
| —: good machine in working order , send me your email
for additional pictures or any information |
|
| Ad # 719 | Horizontal Mills |
| 50's |
Cincinatti |
# 3 |
Good |
sold |
Photo /
More Info. |
| Large Horizontal Mill : 50 taper; 15" x 62" table size |
|
| Ad # 9217 | Horizontal Mills |
| — |
Kerney & Trecker |
# K-2 plain h |
Good |
sold |
Photo /
More Info. |
| —: 20-800rpm
11.5" table
40 taper horiz.spindle
with vertical head
Model K
# 2 Plain Style
7.5 hp
S/N 29-4228
With standard directional table control
Height: 5'4"
width: 6'x6'
Footprint: 50"x 29"
Weight: 6,600 lbs
Specifications
Table Size 12"x 56"
X Axis Travel 27"
Knee Travel 10"
Spindle RPM 15-1500 RPM
Spindle Taper ISO 50
Rapid Travers
|
|
| Ad # 9217 | Horizontal Mills |
| — |
Kerney & Trecker |
# K-2 plain h |
Good |
sold |
Photo /
More Info. |
| —: 20-800rpm
11.5" table
40 taper horiz.spindle
with vertical head
Model K
# 2 Plain Style
7.5 hp
S/N 29-4228
With standard directional table control
Height: 5'4"
width: 6'x6'
Footprint: 50"x 29"
Weight: 6,600 lbs
Specifications
Table Size 12"x 56"
X Axis Travel 27"
Knee Travel 10"
Spindle RPM 15-1500 RPM
Spindle Taper ISO 50
Rapid Travers
|
|
| Ad # 11939 | Horizontal Mills |
| 1948 |
Cincinnati |
Dual Spindle |
Fair |
sold |
Photo /
More Info. |
| Travel 16" x 66"--facing mill-dual spindle: Cincinnati Dual Spindle Milling Machine-Facing Mill
Serial # 3B42 D1Z-2
Table, 66" x 16"
Coolant tank and pump |
|
| Ad # 7230 | Horizontal Mills |
| 1992 |
SUPERMAX |
YCM-2H |
Excellent |
sold |
Photo /
More Info. |
| YCM-2H SUPERMAX Plain Horizontal Mill: YCM-2H SUPERMAX Plain Horizontal Mill
Table size 11” x 52”
Range: Longitudinal 40”
Cross travel 11 ½” auto, 12 ½” manual
Vertical(knee) 19”
Taper in spindle No.40
9 Spindle speeds 85-1300 RPM
Longitudinal & cross feeds ½ - 27 ½ IPM
Vertical feeds ¼ - 13 ¾ IPM
Longitudinal & cross rapid traverse rate 118 IPM
Vertical rapid traverse rate 59 IPM
EQUIPPED WITH:
Square box type hardened knee ways
Power rapid traverse
Backlash compensation for climb milling
Arbor support
Pendant control
(1)No. 40 arbor
3-axes Acu-Rite Quik Count D.R.O.
Coolant
5 H.P. 3/60/240 Volt Motor w/ Penta AC
variable Speed Drive control |
|
| Ad # 7228 | Horizontal Mills |
| 1971 |
CINCINNATI |
#4 |
Good |
Sold |
Photo /
More Info. |
| #4 CINCINNATI Dial type dual power wide knee plain Horizontal Mill: #4 CINCINNATI Dial type dual power wide knee plain Horizontal Mill
Table working surface 20” x 96”
Range:
Longitudinal 42”
Cross 14”
Vertical (knee) 20”
Centerline of horizontal spindle to table 20 ¾”
Spindle taper No.50
24 Spindle speeds 14-1400 RPM
32 Longitudinal & cross feeds 3/8- 90 IPM
32 Vertical feeds 3/32-22 ½ IPM
Power rapid traverse rate longitudinal & cross 150 IPM
Power rapid traverse rate vertical 37 ½ IPM
EQUIPPED WITH:
(2) Arbor supports
(1)No.50 arbor w/(2) cutters
Power rapid traverse
Side controls
Dynopoise overarm
Coolant
Front located table longitudinal travel handle
Snap Set 2-axes Mech. readout
Work light
Auto table cycle w/ (2) dogs
5 H.P. feed/rapid motor
50 H.P. 3/60/575 volt motor
with controls |
|
| Ad # 7227 | Horizontal Mills |
| 1965 |
KEARNEY & TRECKER |
#415-S-15 |
Good |
Sold |
Photo /
More Info. |
| #415-S-15 KEARNEY & TRECKER Plain Horizontal Mill: #415-S-15 KEARNEY & TRECKER Plain Horizontal Mill
Table working surface: 15" x 76"
Range: Longitudinal: 42"
Cross: 14"
Vertical (knee): 19"
Taper in spindle: No. 50
24 Spindle speeds: 25 to 2000 RPM
32 Feeds: 3/8 to 90 IPM
32 Vertical feeds (knee): 3/16 to 45 IPM
Rapid traverse rate: Longitudinal & cross: 150 IPM
Vertical: 75 IPM
Center of spindle to tabletop: 7/8" minimum & 19 7/8" maximum
EQUIPPED WITH: Hardened knee
Automatic cycle table control
Power rapid traverse
Coolant
Manual drawbar
Pendant control
3 H.P. Feed motor
15 H.P. 3/60/220-440 volt main drive motor with controls |
|
| Ad # 7229 | Horizontal Mills |
| 1961 |
KEARNEY & TRECKER |
#525TF |
Good |
Sold |
Photo /
More Info. |
| #525TF KEARNEY & TRECKER Plain Horizontal Wide Knee Mill: #525TF KEARNEY & TRECKER Plain Horizontal Wide Knee Mill with H.D. Double S... |
|
| Ad # 7226 | Horizontal Mills |
| 1950 |
CINCINNATI |
#6, Model OD |
Good |
sold |
Photo /
More Info. |
| #6 CINCINNATI Dual power wide-knee plain Horizontal Mill, Model OD: #6 CINCINNATI Dual power wide-knee plain Horizontal Mill, Model OD, rebuilt... |
|
| Ad # 7225 | Horizontal Mills |
| 1958 |
CINCINNATI HYDROTEL |
— |
Good |
sold |
Photo /
More Info. |
| 48” x 168” CINCINNATI Horizontal Hy-dro-tel Milling Machine: 48” x 168” CINCINNATI Horizontal Hy-dro-tel Milling Machine with independen... |
|
| Ad # 9196 | Horizontal Mills |
| — |
Standard Engineering |
#1 |
Good |
sold |
Photo /
More Info. |
| 20"x4" table: — |
|
| Ad # 11039 | Horizontal Mills |
| — |
cincinnati |
horizontal milling machine |
Very Good |
sold |
Photo /
More Info. |
| 10" x 52.5": Cincinnati 550 volt, 3 Ph horizontal milling machine with 110 volt control ... |
|
| Ad # 1724 | Horizontal Mills |
| — |
Graham |
— |
Fair |
Sold |
Photo /
More Info. |
| Horizontal Mill: Table: 11" x 60"
|
|
| Ad # 1716 | Horizontal Mills |
| — |
Cincinnatti |
# MH2 |
Good |
Sold |
Photo /
More Info. |
| Heavy Duty Horizontal Mill: Table: 10 1/2" x 52 1/2"
many arbors included approx:8 pcs
cutters misc.
vise/swivel |
|
| Ad # 13119 | Horizontal Mills |
| — |
milwaukee |
No. 2 B |
Needs Work |
sold |
Photo /
More Info. |
| table size 13 by 47: Taken out of production on 9-20-2012 ,
table size 13 - 47 w 3 t-slots ,
can be repaired or used for parts , comes with
coolant pump , make offer |
|
| Ad # 11895 | Horizontal Mills |
| — |
Kearney & Trecker |
TF-17 |
Good |
sold |
Photo /
More Info. |
| Table size 17" x 72", travel long 34": Kearney & Trecker 320 TF-17 Plain Horizontal Mill
17 X 72 Table
Specifications:
Table Size 17" X 72"
Travels Long 34"
Cross 12"
Knee 18"
Spindle Speeds (24) 15-1500
Spindle Taper #50
Spindle HP 20
Feeds 3/8-90
Weight 11,200 LBS
Include scales, but does not have DRO. |
|
| Ad # 13123 | Horizontal Mills |
| — |
Brown & Sharpe |
— |
Good |
sold |
Photo /
More Info. |
| —: machine has been in storage for a few years . was
running when stored ,
table size 7 - 40 w/1 t-slot , make offer |
|
| Ad # 8153 | Horizontal Mills |
| unk |
Brown & sharp |
9 |
Good |
sold |
No Photo /
More Info. |
| #9 Brown & Sharpe Taper: old but in good shape. Great 2nd operation machine Several tool-holders i... |
|
| Ad # 8154 | Horizontal Mills |
| — |
— |
# 9 |
Good |
SOLD |
Photo /
More Info. |
| Rise and Fall Production Mill: Old but in good shape, great for 2nd operation.
Several Tool-Holders included
# 9 Brown & Sharpe Taper |
|
| Ad # 7132 | Horizontal Mills |
| 1973? |
Cincinnati |
Series 20, CIM-X |
Good |
Sold |
Photo /
More Info. |
| 50" x 16" Heavy Duty, Dual Spindle Horizontal Bed Mill : Table: 50" x 16"
travels 24" x 28" x 20" heigh
Rotary Table: 24" x 20" (removable)
Spindles: Dual - CAT 40 and CAT 50
Spindle Speeds: 70 - 2240
Spindle Reverse/Forward switch
Power Draw Bar
Mechanical Feed/Speed Calculator
Power Feeds: All axes
3-Axis DRO (Gurley Point Finder)
Coolant System |
|
| Ad # 5635 | Horizontal Mills |
| — |
Barker |
AM |
Fair |
Sold |
Photo /
More Info. |
| small horizonal mill manual mill: Table 6" x 20
X Travel 12"
Y travel 10"
manual operation |
|
| Ad # 13070 | Horizontal Mills |
| 1948 |
cincinattee duplex |
duplex4-36 hydromatic |
Good |
sold |
Photo /
More Info. |
| 56 inch table : older model duplex mill . still working when taken out of production for up... |
|
| Ad # 13070 | Horizontal Mills |
| 1948 |
cincinattee duplex |
duplex4-36 hydromatic |
Good |
sold |
Photo /
More Info. |
| 56 inch table : older model duplex mill . still working when taken out of production for up... |
|
| Ad # 2344 | Horizontal Mills |
| unknown |
Victoria |
U1 |
Fair |
Sold |
Photo /
More Info. |
| Victoria U1 Horizontal Mill : Table Size 40" x 10"
Long Travel 20"
Cross Travel 10"
Vertical Travel 16"
Speeds 30-1000
Spindle Taper- 40
Voltage 550/3/
Weight 1900lbs
Includes:
Horizontal Spindle - 40 Taper
|
|
| Ad # 15400 | Horizontal Mills |
| 1950's |
Cincinnati |
No.3 |
Good |
sold |
Photo /
More Info. |
| Table Size: 16" x 64": Horizontal Boring Mill
Make: Cincinnati
Model: No.3
Electrical: 230/3 Phase
TABLE SIZE: 16" x 64-3/4"
TABLE TRAVEL: 16"
TABLE CROSS TRAVEL: 34"
SPINDLE TAPER: 50
KNEE TRAVEL UP & DOWN:16"
SPINDLE SPEEDS: 18-450 RPM
SADDLE & TABLE FEEDS: 3/8-90 IPM
RAPID LONG & CROSS: 150 IPM
RAPIDS KNEE: 37 IPM
MAIN MOTOR: 25HP |
|
