| Year:
| 2005
|
| Make:
| Proto Trak
|
| Model:
| Trak :DPMF2
|
| Condition:
| Excellent
|
| Serial #:
| On Request
|
|
| Machine Status: | Still in production
|
| Shipping Info: | We can load
|
| Weight: | 3200
|
| Dimension: L x W x H | 64x96x89 |
Machine Location:
|
| City: |
On Request
|
| State: |
North Carolina
|
Country:
|
USA
|
Price:
|
$Sold USD
|
|
| General Description |
- Proto Trak Edge 3 Controller,
The entry level C.N.C. control with up to 4 axis D.R.O. display is able to do simple cycles like bolt hole circles, circular and rectangular pockets, even complex profiles.
This control offers a real leap forward in the productivity of a turret mill - one day no one will buy a conventional D.R.O. for a turret mill.
Hardware
Digital Servo Amplifiers.
Precision Ground Ball Screws.
Enclosures to lock out contamination.
7.4” LCD with adjustable contrast.
Floppy Disk Storage for part programs.
Software
Diameter Cutter Compensation – allows programming of the part rather than the center of the tool path.
Circular Interpolation – makes arcs and any size hole easy to do with standard tools.
Linear Interpolation – to machine lines at any angle.
Conrad – provides automatic corner radius programming with one data input.
Incremental and Absolute programming can even be mixed within an event.
Teach – to program manual position and mill moves.
Look – a single button press to view graphics during programming.
Maths Help – for calculating points and intersections simply with no need for a calculator.
Continue Mill to eliminate repetitive data inputs while programming.
Programming Canned Cycles
Position/Drill – single point.
Bolt Hole – series of points evenly spaced around a circle
Mill – straight line at any angle.
Arc – any portion of a circle.
Pocket – a rectangle or circle and all the material inside, includes finish cut.
EDGE Control Options
Off-line Programming for running the ProtoTRAK software on a PC.
Remote Stop/Go (RSG) switch.
Scale on quill or knee, or both interlinked.
9 x 49 Table size,
travels-Approx X+30",Y=18", Z=23" Travels, plus a 5" Quill Scale
Table Size - 49" x 9"
T-Slots (number x width x pitch) - 3 x 16mm x 63.5mm
Travel (X, Y, Z axis) - 32 x 16 x 27
Quill Diameter - 3 3/8"
Maximum Quill Travel - 5"
Spindle Taper - R8
Spindle Speed Range RPM - Varispeed drive - 70-4200
Spindle Speed Range with E Head Option - 40-600, 300-5000
Spindle Center to Column Face - 18"
Spindle Motor Power - vari-speed head - 3 HP
Spindle Motor Power - Optional E head - 3 HP
Power requirements, control - 110V; 1P; 8A
Power requirements, machine with vari-speed head - 220/440;3P; 8.5/4.25A
Power requirements, machine with Optional E head - 220V;3P; 11A
Maximum Weight of Workpiece - 1320 lbs.
Height of table from bottom of bed - 33"
Max spindle nose to table - 27"
Min height - 90"
Max height - 98"
Width of machine including table - 70"
Length with electric box door closed - 64"
Overall width incl full table traverse - 104"
Overall length with electrical door open - 72"
Footprint of Machine - 23 x 40"
Weight net / shipping lbs. - 3200 / 3500
Rapid traverse X, Y, Z - 150 IPM
Auto Lube Pump
Precision ground ballscrews in the table, saddle and ram
Chrome hardened and ground quill
Meehanite castings
Slide ways are Turcite coated
Wide way surfaces are hardened and ground
Drilling max capacity, Varispeed head- 1" dia
Milling max capacity, Varispeed head - 2 inch3/min
Tapping max capacity, Varispeed head - .75"
Drilling max capacity, Optional E head - 1"
Milling max capacity, Optional E head - 3 inch3/min
Tapping max capacity, Optional E head - 3 /4
|
| Electrical Description |
|
|
| Comments: |
- This Machine is Very Clean, sold for 25K new
|
|
