| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 7040 | Horizontal Machining Centers (HMC) |
| 2003 |
MAZAK |
PFH 5800 |
Excellent |
Sold |
Photo /
More Info. |
| One (1) 2003 MAZAK PFH 5800: One (1) 2003 MAZAK PFH 5800
Number of Pallet Stations 6
Pallet Size 19.69" x 19.69"
X Axis Travel 28.74"
Y Axis Travel 28.74"
Z Axis Travel 29.13"
Table Indexing .001 N/C Controuring
Max Table Load 1543 Lbs
Spindle Center To Table Top 3.15"-31.89"
Spindle Drive Motor 30 HP AC
Spindle Taper CAT # 40
Spindle Speeds 15,000 RPM
Number of Ranges 2
Rapid Traverse Rate 2,362 IPM X,Y,Z
Max Programmable Feedrate 2,362 IPM
Auto Tool Change Capacity 80 Tools
Machine Weight 22,400 Lbs
Equipped With Mazatrol 640M Conversational Control
(6) Station Pallatech With (6) Pallets and (1) Load Station
Cell Controller With Version E Software
EIA/ISO Measuring System Software
EIA/ISO Programming
Tool Life Management
Tool Breakage Detection
High Pressure Superflow II Thru Spindle Coolant System
80 Tool Capacity
Monitoring System B With MP700 Probe
Performance CNC Package
Inch/Metric Conversion
Network Interface
Operator Door Interlock
N/C Rotary Table
Transformer
Work Piece Air Blast
Chip Conveyor
Adaptive Feedrate Control
Tool Life Monitoring |
|
| Ad # 7037 | Horizontal Machining Centers (HMC) |
| 2000 |
Kitamura |
HX-500i |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 2000 Kitamura HX-500i: One (1) 2000 Kitamura HX-500i
Pallet Table Size 19.7" x 19.7"
Travels X Axis 34.3"
Travels Y Axis 28"
Travels Z Axis 26"
Max Load on Table 1760 Lbs
(full 4th)
Spindle Speed 12,000 RPM
SpindleTaper CAT # 50
Tool Magazine Capacity 50 ATC
Tool Change Time 2.0 Seconds
Rapid Traverse Rates 1969 IPM
Main Motor 35 HP
Chip to Chip Time 6 Seconds
Equipped With
Fanuc 16iM CNC Control
Coolant Thru Spindle
Chip Conveyor
Solid Box Ways
All Available Manuals |
|
| Ad # 7043 | Horizontal Machining Centers (HMC) |
| 1992 |
TOYODA |
FH-80B |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1992 TOYODA FH-80B: One (1) 1992 TOYODA FH-80B
Five Axis (trunion) 2 APC
100 Tool ATC
Chip Conveyor
Tool Holders
Refrigeration System
Coolant Wash system
X Axis Travels 39.37"
Y Axis Travel 39.37"
Z Axis Travel 35.43"
B Axis (Rotary .001 deg resolution) 360 deg
A Axis (Rotary Tilt .001 deg resolution +95 deg-05 deg
Motor (AC Drive) 25/20 HP
Spindle taper BT 45
Spindle Speed (Two Ranges) 15-4500 RPM
Pallet Size (2 Pallets) 26.4" x 31.5"
Pallet Load Capacity 880 lbs
Tooling 200 Holders Included |
|
| Ad # 7038 | Horizontal Machining Centers (HMC) |
| 1997 |
Leblond-Makino |
A77 |
Very Good |
sold |
Photo /
More Info. |
| One (1) 1997 Leblond-Makino A77: One (1) 1997 Leblond-Makino A77
Pallet Size 24.8" x 24.8"
Max Pallet Load 2,640 Lbs
X Axis Traverse 31.5"
Y Axis Traverse 29.5"
Z Axis Traverse 30.3"
B Axis Traverse 1 Degree Indexing
Rapid Traverse (all Axes) 1181 IPM
Cutting Feeds (all Axe) 1181 IPM
Distance From Table to Spindle 3.9"-33.5"
Distance from Center to Spindle 7.1"-37.4"
Spindle Motor 30/40 HP
Spindle Speed 10,000 RPM
ATC 40 Stations
Tool Change Time 2 Seconds
Max Tool Dia 4.92"/11.8"
Max Tool Length 17.7"
Max Tool Weight 44 lbs
Fanuc Professional 3 Control (Fanuc 16)
1 Degree 4th axis
Standard Coolant Thru
Chip Conveyor |
|
| Ad # 12989 | Horizontal Machining Centers (HMC) |
| 1996 |
Makino |
A77 |
Good |
SOLD |
Photo /
More Info. |
| (2) Pallet Size: 24.8" x 24.8": Qty (4) 1996 Makino A77 HMC's
(2) Pallet Size: 24.8" x 24.8"
Pallet Indexing: .001 Degree
Pallet Load Capacity: 2,000 Lbs, 1.97" - 31.5"
X-Axis: 31.5"
Y-Axis: 29.5"
Z-Axis: 31.5"
B-Axis 1 degree indexing
Spindle Speed: 10,000 RPM (Maximum)
Spindle Tool Taper: CAT #50
Spindle HP: 30 HP / 40HP
Tool Changer Capacity: 40 Tools
Maximum Tool Weight: 44 Lbs
Maximum Tool Length: 17.7"
Nematron/Fanuc controls.
|
|
| Ad # 14474 | Horizontal Machining Centers (HMC) |
| 90s |
TSUGAMI |
MA5 |
Good |
sold |
Photo /
More Info. |
| 8 Pallet :: 450mm x 450mm: TSUGAMI MA5 Horizontal MACHINING CENTER
8-PALLET CNC
HORIZONTAL
64-POSITION TOOL
CHANGER
#40 TAPER SPINDLE -
6000 RPM
FANUC 11M CNC CONTROL
no chip conveyor
X Axis - 560mm
Y Axis - 350mm
Z Axis - 580mm
Pallet Size - 450mm x
450mm
Max. Work Size - 450mm
x 450mm x 420mm
Max. Work Weight -
250kgs
Max. Tool Length -
330mm
Max. Tool Diameter -
90mm Standard
Max. Tool Weight -
9kgs
Standard
Spindle Taper - 40BT
Spindle Speeds - 35-
6000rpm
manuals on disc
loading/rigging fee:
$800.00
|
|
| Ad # 4334 | Horizontal Machining Centers (HMC) |
| 2002 |
HONSBERG LAMB |
MACH-1- 630 |
Very Good |
sold |
No Photo /
More Info. |
| HONSBERG LAMB HIGH SPEED TWIN SPINDLE HORIZONTAL MC: FULL TECHNICAL SPECIFICATIONS, CATALOGE INFORMATION AND MORE PHOTOGRAPHS ON... |
|
| Ad # 6988 | Horizontal Machining Centers (HMC) |
| 1979 |
TOYODA |
FHN50 |
Good |
Sold |
Photo /
More Info. |
| USED TOYODA TYPE FHN50 CNC HORIZONTAL MACHINING CENTER: USED TOYODA TYPE FHN50 CNC HORIZONTAL MACHINING CENTER
ROTARY INDEX TABLE SIZE: 19.7" X 19.7"
ROTARY INDEX TABLE, INCREMENTAL ANGLE: 5 DEGREES
WORK TABLE, LATERAL TRAVEL (X-AXIS): 28"
SPINDLE HEAD, VERTICAL TRAVEL (Y-AXIS): 19.7"
SADDLE, CROSS TRAVEL (Z-AXIS): 19.7"
RAPID FEED RATE: 393.7 IPM
DISTANCE SPINDLE C/L TO TOP OF TABLE: MIN. - 5.9"
MAX. - 25.6"
SPINDLE SPEEDS: 20 TO 3150 RPM
AUTOMATIC TOOL CHANGER: 24 TOOLS
MAGAZINE INDEXING: RANDOM SELECTION
MAXIMUM TOOL LENGTH: 15.7"
MAXIMUM TOOL WEIGHT: 33 LBS.
EQUIPPED WITH:
FANUC 3000C CNC CONTROL
TAPE READER
AUTOMATIC TOOL CHANGER
3-AXIS DRO |
|
| Ad # 6987 | Horizontal Machining Centers (HMC) |
| 1982 |
KURAKI |
MH-630 |
Good |
sold |
Photo /
More Info. |
| USED KURAKI MODEL MH-630 CNC HORIZONTAL MACHINING CENTER: USED KURAKI MODEL MH-630 CNC HORIZONTAL
MACHINING CENTER
TABLE (PALLET) SIZE: 24.8" SQUARE (2)
TABLE TRAVEL (X-AXIS): 33.86"
HEAD TRAVEL (Y-AXIS): 27.95"
SADDLE TRAVEL (Z-AXIS): 25.98"
SPINDLE SPEEDS: 30 TO 4000 RPM
SPINDLE TAPER: NO. 50 CAT
TABLE LOAD CAPACITY: 2,200 LBS.
MAIN DRIVE MOTOR: 20 HP
EQUIPPED WITH:
FANUC 6MB CNC CONTROL
32 TOOL AUTOMATIC TOOL CHANGER
(2) 24.8" SQUARE PALLETS
RS 232 PORT
TAPE READER |
|
| Ad # 14897 | Horizontal Machining Centers (HMC) |
| 2001 |
Okuma |
MA-50HB HMC |
Good |
sold |
Photo /
More Info. |
| 500MM twin pallets: 2001 Okuma MA-50HB Horizontal Machining center
Twin 500 mm pallets W/ 4 axis 1 degree indexing
• 10 RPM spindle
• 60 Tools
• Coolant thru the spindle
• Okuma OSP-U100M control
•
STD Specification-please verify actual machine!
Description
Working Surface of Pallets (2) 19.68" x 19.68"
Maximum Weight on Each Pallet 1,764 lbs
X-Axis Travel (Column) 27.55"
Y-Axis Travel (Spindle Head) 31.49"
Z-Axis Travel (Table) 27.55"
Spindle Center to Table Minimum 5.9"
Spindle Center to Table Maximum 33.46"
Spindle Taper No. 50
Spindle Drive 20 HP/15 HP
Spindle Speeds 50-10000 RPM
Pallet Index Positions Full 4th
Tool Changer Positions 60
Approximate Weight 50,600 lbs
Equipped With: please confirm/verify actual machine for below options!!
Okuma OSP-U100M CNC Control.
Helical Cutting.
Tool Life Management.
50-Slot Work Coordinates.
Synchronized Tapping.
(2) 19.68" X 19.68" Pallets.
4th Axis-1 deg index.
Thru Spindle Coolant.
Oil Chiller.
Cat 50 spindle taper
|
|
| Ad # 6926 | Horizontal Machining Centers (HMC) |
| 1997 |
MAZAK |
HV-800X DUAL PALLET |
Very Good |
sold |
Photo /
More Info. |
| MAZAK MODEL HV-800X DUAL PALLET, UNIVERSAL HEAD MACHINING CENTER: MAZAK MODEL HV-800X DUAL PALLET, UNIVERSAL
HEAD MACHINING CENTER
(2) Pallet Size: 31.5" x 31.5"
Maximum Pallet Weight Capacity: 4850 Lbs.
X-Axis Travel: 49.2"
Y-Axis Travel: 39.4"
Z-Axis Travel: 41.3"
C-Axis Travel: .001 Degree
Head Rotation: 1 Degree
Spindle Speeds: 35 - 4,000 RPM
Spindle Taper: BT 50
Spindle Drive Motor: 25/30 HP
Distance Spindle Nose to Pallet: 1.9" - 43.3"
Distance Spindle Center to Pallet: 3" - 46.4"
EQUIPPED WITH:
Mazatrol M-Plus CNC Control
Universal Head
Rigid Tapping
Air Blast
Coolant System and Chip Conveyor
(40) Position Automatic Tool Changer
Thru Spindle Coolant
Auto Tool Length/Broken Tool Detection |
|
| Ad # 6925 | Horizontal Machining Centers (HMC) |
| 1993 |
MATSUURA |
MAM-600HF-PC2 |
Very Good |
sold |
Photo /
More Info. |
| MATSUURA MODEL MAM-600HF-PC2 HORIZONTAL MACHINING CENTER: MATSUURA MODEL MAM-600HF-PC2 HORIZONTAL
MACHINING CENTER
Pallet Size: 15.75" x 15.75"
Number of Pallets: 2
Table Load Capacity: 880 Lbs
Table Indexing Positions: 360
X-Axis Travel: 23.60"
Y-Axis Travel: 18.60"
Z-Axis Travel: 21.60"
Spindle Speed: 6,000 RPM (Max.)
Spindle Tool Taper: CAT #40
Tool Changer Capacity: 60
Spindle HP: 15/10
EQUIPPED WITH:
Yasnac i80 CNC Control
60 Positions ATS
Enomoto Chip Conveyor
Air Dryer
Oil Chiller
AC Main Spindle Drive Motor
Assorted Tool Holders |
|
| Ad # 8993 | Horizontal Machining Centers (HMC) |
| 2004 |
MAKINO |
A71 |
Good |
sold |
Photo /
More Info. |
| Travel s 28.7" x 28.7" x 31.5": Pallet Size: 19.7" x 19.7"
Travel 28.7" x 28.7" x 31.5"
Spindle Center to Top of Pallet 3.1" x 31.9"
Spindle Nose to Center of Pallet 2"-33.5"
Spindle Drive Motor 25HP AC
Tools: 60ATC, Tool Change Time: 1.7 Seconds
Approximate Floor Space Required 121.5" x 192.4"
Bed Construction: One Piece Meehanite Casting
Table Rapid Traverse 1,968 IPM
Spindle Head Rapid Traverse 1,968IPM
Traveling Column Rapid Traverse 1,968IPM
360 Degree Pallet Table
Spindle Tool Shank Types: CAT50, Rigid Tap
Speed Range: 50-10,000RPM
Spindle Orientation Drive Motor Output 30HP AC
Chip and Coolant Rear Discharge, 1,000 PSI Throught the Spindle Coolant
Equipped With Fanuc 18I Control
Work Piece Was Gun
Renishaw MP700, 300 Additional Work Offsets
Helical Interpolation
GL3 High Speed Control System
Transformer
|
|
| Ad # 4171 | Horizontal Machining Centers (HMC) |
| 2002 |
Compu-Mill |
HMC-410 |
Excellent |
Sold |
No Photo /
More Info. |
| COMPUMILL 410mm PALLET HMC: TWO MACHINES AVAILABLE:
PALLET SIZE: 16.14” X 16.14”(410 MM)
MOUNTING HOLES M16, 50 MM SPACING
MAXIMUM TABLE LOAD 700 LBS.
X-AXIS TRAVEL 24.01” (610 MM)
Y-AXIS TRAVEL 20.08” (510 MM)
Z -AXIS TRAVEL 19.70” (500 MM)
INDEX TABLE (PALLET) 360,000 POSITIONS (FULL 4TH)
DISTANCE FROM TABLE TOP TO SPINDLE NOSE 2” TO 17.72”
DISTANCE FROM TABLE CENTER TO COLUMN SLIDEWAY: 16.14”
SPINDLE TAPER CT 40
SPINDLE SPEED 80 - 12,000 RPM
DRIVE METHOD DIRECT
RAPID FEED X,Y 1180 IPM
RAPID FEED Z 1180 IPM
CUTTING FEED X,Y,Z 472 IPM
ATC 60 TOOLS
TOOL EXCHANGE TIME 1.8 SECONDS
TOOL SELECTION METHOD RANDOM BI-DIRECTIONAL, TOOL HOLDER STYLE CT 40
MAX. TOOL DIAMETER 3.3"/4.9" ADJACENT POCKET EMPTY
ACCURACIES:POSITIONING 0.0002"
FULL STROKE
REPEATABILITY 0.0001"
INDEXING +/- 3.0 ARC SECONDS
REPEATABILITY +/- 1.0 ARC SECONDS
SPINDLE MOTOR 12/15 HP AC/30
MIN.POWER REQUIREMENT 25 KVA, 220VAC,3P/60 HZ
AIR REQUIREMENT 71-100 PSI,
CONTROL FANUC 18I-M
|
|
| Ad # 10861 | Horizontal Machining Centers (HMC) |
| 2001 |
KIWA |
KNH 400 |
Very Good |
Sold |
Photo /
More Info. |
| KIWA KNH400 : 600/600/500 XYZ Travel, 400x400mm pallet, 10,000 spindle speed, cat 40, dua... |
|
| Ad # 14379 | Horizontal Machining Centers (HMC) |
| 1992 |
Cincinnati Milacron |
SABRE 400H-MK1 |
Good |
sold |
Photo /
More Info. |
| X 22" x Y20" x Z 18": Well maintained and still under power. The
Pallet Changer is not working and need to be
repaired. Rest of machine in working order.
Various tools that can be negotiated.
Machine has a two pallet changer.
Rotary indexing B table.
Small problem on the pallet changer. Rest
of machine still working. A good machine to
retrofit.
SABRE 400H
CINCINNATI MILACRON SABRE 400H Twin
Pallet CNC with Indexing B Axis
CNC control CINCINNATI MILACRON
ACRAMATIC 850 SX
Longitudinal travel (X-axis) 560 mm
Transversal travel (y axis) 510 mm
Vertical travel (z axis) 460 mm
Table divisions (B) 360000 x 0.001 °
Table speeds: up to 10 rpm
Pallets: number 2
Length 400 mm
Width 400 mm
Tool changer: Number of tools 60
Tool diameter 100 mm
Diameter with free adjacent pockets 160
mm
Tool length 300 mm
Max. tool-weight 6.8 kg
Time of tool changing 9.8 s
Spindle nose: Cat 40
Horizontal spindle speeds:60 rpm up to
8000 rpm
Feed range 3 - 18600 mm/min
Rapid traverse: 18.6 m/min
Voltage 60 Hz 3x 230 Volt
Spindle motor 9 / 11 kW
Total power required 36 kVA
Overall dimensions machine:
Length 3900 mm
Width 3700 mm
Height 2800 mm
Transport weight 7500 kg
Various accessories:
Coolant system 500 litres
Chip conveyor
Various Tools
|
|
| Ad # 13642 | Horizontal Machining Centers (HMC) |
| 2000 |
Heller |
MC25 |
Good |
sold |
Photo /
More Info. |
| travels: 800mm(31.5") x 800mm(31.5") x 800(31.5): Heller MC25 Horizontal Machining center
Please verify actual machine specs
main spindle motor:40 HP
travels: 800mm(31.5") x 800mm(31.5") x 800(31.5)
table size/pallet size: 500mm(19.7) x 630mm(24.8")
GENERAL DESCRIPTION CNC CONTROL-Siemens Sinumerik 840D control
MACHINE TYPE:HORIZONTAL MACHINING CENTER
COLUMN CONSTRUCTION MULTI/BRIDGE
COLUMN STYLE TRAVELLING
WORK SUPPORT BED
MAIN SPINDLE TOOLING
TYPE FIXED
DIRECTION HORIZONTAL
TAPER spindle: SK40
Max Spindle RPM 6000
No. of RANGES 1
No. of SPINDLES 1
HORSEPOWER 40.00
ARTICULATED AXIS None
"U" AXIS None
PRIMARY TOOL CARRIER ATC
TOTAL NUMBER of TOOLS 40 verify?
MAX. TOOL LENGTH 15.748
MAX. TOOL DIAMETER 2.830
MAX. TOOL WEIGHT 26.00
TOOL CHANGE TIME --
CHIP-to-CHIP TIME 3.80
HEAD CHANGER None
WORK SUPPORT AXIS SPECIFICATIONS
TABLE SIZE L:24.800 X W:19.685
MAX. WEIGHT OF WORKPIECE 1760
AUTO. PALLET CHANGER Std.
No. of PALLETS 2
INDEX TABLE Std.
INDEX TABLE DEGREES 90.00
ROTARY TABLE Opt.
DUAL AXIS ROTARY TABLE None
No. of AXES: 3 (Options: 4, 5) AXIS TRAVEL RAPID TRAVERSE CUTTING FEED
X1 (Std.) 31.496 Inch 2362 IPM --
Y1 (Std.) 31.496 Inch 2362 IPM --
Z1 (Std.) 31.496 Inch 2362 IPM --
B (Std.) 360.000 Deg. -- --
Note: no tooling included
2 units available for sale
rigging/loading fee 3200.00 each |
|
| Ad # 14374 | Horizontal Machining Centers (HMC) |
| 11/1993 |
Mori Seiki |
MH-40 |
Good |
sold |
Photo /
More Info. |
| 16" x 16" pallet size : 1993 Mori Seiki MH-40 Horizontal machining center
dual pallet system
control: Fanuc MF-M5
16" x 16" pallet size
travels: 20" X,22" Y,20" Z
B-Axis: 1 degree inc.
thru spindle coolant
toolchanger : 40 stations
spindle: 40 taper
spindleRPM: 7000 max
motor: 15HP
rs232 port
chip conveyor w/ skimmer
cut time: 9657 hrs as of 10/17/14
operation hrs: 15,300 as of 10/17/14
includes all books & manuals
Machine is in good running condition-ready to go |
|
| Ad # 2131 | Horizontal Machining Centers (HMC) |
| 1977 |
Monarch |
HMC-100 |
Good |
sold |
Photo /
More Info. |
| Horizontal CNC Machining center: Original NC control -
retrofitted to CNC Fanuc GN11 control
Travels-72x, 30"y,20" z
Table -70" x 28"
24 tool ATC
5" spindle
4th axis indexer included-22" x 22"
RS 232 port for offline programming
69,554 HRS on time
Much tooling included
Manuals
Approx 25HP
|
|
| Ad # 14333 | Horizontal Machining Centers (HMC) |
| late 80' |
Pratt & whitney |
48A30 |
Excellent |
sold |
Photo /
More Info. |
| 39.5" x 52 table: PRATT & WHITNEY VIKING HORIZONTAL MACHINING CENTER
W/ CHIP CONVEYOR,
HYDRAULIC UNIT,
CHILLER,
CONTROL PANEL (AIR CONDITIONED),
52" X 39-1/2" T-SLOTTED TABLE
ALLEN BRADLEY CONTROL series 9
MODEL: 48A30
48" x travel
49" y travel
20" z travel
Machine was fully rebuilt in 2004
new electricals
tool changer was upgraded from 20 atc to 36 atc
new ball screws
new drives |
|
| Ad # 5348 | Horizontal Machining Centers (HMC) |
| 1991 |
Cincinnati-Milicron |
AM |
Very Good |
Sold |
Photo /
More Info. |
| T-20 Cincinnati-Milicron 3-axes CNC Horiz. Machining Center:
Category
CNC Machining Centers
Sub-Category
Horizontal
Manufacturer
CINCINNATI-MILACRON
Model
AM
Year
1991
Size
T-20
-- Full Description
T-20 Cincinnati-Milacron 3-axes CNC Horizontal Machining Center with Dual Shuttle system and 65 automatic toolchanger,
Model AM, New 1991
( hrs.usage meter 18,125 hrs.)
Longitudinal travel (x axis) : 32"
Range, C/L of B-axis to C/L of spindle : +/- 16"
Vertical travel (y axis) : 32"
Range, top of pallet to C/L of spindle : 0 to 32"
Cross travel (z axis) : 32"
Range, C/L of B axis to spindle gage line : 6 to 38"
Pallet working surface : 24.8" x 24.8"
Load capacity : uniform : 3000 lbs.
offset 5" : 2500 lbs.
B-Axis: Pallet stations
No.programmable index positions : 360
Index speed : 25 RPM
Spindle speed range : 20 to 6000 RPM
Spindle taper : No.50 ANSI V-flange
Feed rates of slides : 0.1 -720 IPM
Rapid traverse rate : 720 IPM
Max.tool weight : 60 lbs.
Max.tool length : 18"
Max.tool diameter : (fullchain) : 4"
(adjacent pockets empty) : 12"
Automatic tool change time 12 seconds
EQUIPPED WITH :
Dual shuttle system with extra table
65 tool automatic toolchanger
B-axis with 360 positions, 1 deg
Coolant system
(31) toolholders
Automatic chip conveyor
Oil cooler
20 H.P. Spindle Drive Motor
Cincinnati Acramatic 950 CNC control with CRT, keyboard and ports
3/60/460 Volt input
|
|
| Ad # 14313 | Horizontal Machining Centers (HMC) |
| — |
Mazak |
H-15 |
Excellent |
sold |
Photo /
More Info. |
| (2) 23.5'' X 23.5'' PALLETS: MAZAK MODEL H-15 HORIZONTAL MACHINING CENTER WITH
CAT50 TAPER
SPINDLE SPEEDS TO 3600RPM,
360 POSITIONS IN 4TH AXIS,
(2) 23.5'' X 23.5'' PALLETS,
36'' X-AXIS TRAVEL,
28'' Y-AXIS TRAVEL,
25'' Z-AXIS TRAVEL,
MAZATROL M2 CNC CONTROLS,
40 POSITION ATC,
GOOD TIGHT MOTOR,
SERVOS & TRUE POSITION REPEATABILITY |
|
| Ad # 6757 | Horizontal Machining Centers (HMC) |
| 2000 |
Makino |
A-66 |
Very Good |
Sold |
Photo /
More Info. |
| 2000 Makino A-66: 2000 Makino A-66
Axis Rotary Table
40 Taper
60 ATC
31.5" x 27.6" x 25.2" Travels
35 HP
14,000 RPM
Coolant Thu Spindle
Pallet Size 19.69"/2
Chip Conveyor
Rigid Tapping |
|
| Ad # 6761 | Horizontal Machining Centers (HMC) |
| 1986 |
Okuma |
4H |
Good |
Sold |
Photo /
More Info. |
| 1986 Okuma 4H: 1986 Okuma 4H
15.75" Pallets
2 Pallets
Trvls 22" x 15.75" x 15.75"
15 HP
6000 RPM
#40
32 ATC |
|
| Ad # 8958 | Horizontal Machining Centers (HMC) |
| 7/2005 |
Daewoo/Doosan |
DHP 5000 |
Excellent |
Sold |
Photo /
More Info. |
| 19.7 in pallet ,travels 33.4 X, 27.6-Y, 29.5- Z: travels: 33.4 in X, 27.6 in Y, 29.5 in Z
pallet size-19.7 x 19.7 (2)
load 1100 lbs
max swing of part 31.5 dia x 36.6 height
index -1 degree
rotart pallet shuttle-change time 8 sec
spindlke iso 40 big plus type
14,000 RPM spindle speed
30 HP
60 tools changer
2,362 IPM rapids
accuracy +- 0.00020 repatabilty 0.00008
ridged tapping
Control Fanuc 18iM
spindle taper air blow
thru spindle coolant 1000PSi
includes- tombstomnes & 8 kurt vises
power on time-5404hrs, cutting time-1704hrs operation time-2659 hrs
t-sloted table
max tool dia-2.95 in
max tool dia w/ adj pocket empty-5.5 in
max tool length-15.7 in
max tool weight-22,21 lbs
max spindle torque-139 ft-lbs
|
|
| Ad # 3722 | Horizontal Machining Centers (HMC) |
| — |
Ex-Cello |
105 WorkCenter |
Good |
sold |
Photo /
More Info. |
| 400 mm pallets HMC-5 axis capable: Travels:
X 24"
Y 20"
Z 16"
Table Indexing: 1 deg pogramable
Spindle Drive:
Spindle Speeds:
Spindle Nose: # 45 NMTBA TAPER (CAT 45)
Tool Changer: 24 Stations |
|
| Ad # 3726 | Horizontal Machining Centers (HMC) |
| — |
Machinery Systems |
HMC-25 |
Fair |
Sold |
Photo /
More Info. |
| Large (40x40x39) 4-Pallet Changer HMC: Travels:
X 40"
Y 40"
Z 39"
Tool Changer: 48 Station
|
|
| Ad # 6756 | Horizontal Machining Centers (HMC) |
| 1997 |
Kitamura |
H-400 |
Very Good |
sold |
Photo /
More Info. |
| 1997 Kitamura H-400: 1997 Kitamura H-400
Fanuc 15M
TSC
100 ATC
2/15.7 Pallets
Full 4th
10,000 RPM
Chiller
Chip
20 HP
40 Taper |
|
| Ad # 12683 | Horizontal Machining Centers (HMC) |
| 1995 |
mori seiki |
M-25FH |
Good |
sold |
Photo /
More Info. |
| —: Mori Seiki M25-FH
Description: Pallet Size: 304.80mm x 304.80mm
Number of Pallets: 1
X-Axis Travel: 350.52mm
Y-Axis Travel: 368.30mm
Z-Axis Travel: 199.90mm
Tool Changer: 12
|
|
| Ad # 7907 | Horizontal Machining Centers (HMC) |
| 1982 |
Cincinnati Millicron |
10HC-1500 |
Needs Work |
Sold |
Photo /
More Info. |
| Cincinnati Millicron Model 10HC-1500, 60"X42"X36" travels : Cincinnati Milakron HMC Model 10HC-1500, 60"X42"X36" travels
with built in rotary table, 40 tools,
cat 45 taper,
coolant.
control-big blue
includes some tooling holders |
|
| Ad # 7906 | Horizontal Machining Centers (HMC) |
| 1979 |
Cincinnati Millicron |
10HC-1000 |
Needs Work |
Sold |
Photo /
More Info. |
| Cincinnati Millicron Model 10HC-1000 HMC, 42"X42"X36", with 30" rotary: Cincinnati Millicron Model 10HC-1000 horizontal machining center, 42"X42"X3... |
|
| Ad # 14780 | Horizontal Machining Centers (HMC) |
| 1997 |
Walter |
HMC 400 |
Excellent |
sold |
Photo /
More Info. |
| Tool & cutter grinder:10": Walter HMC 400 tool & cutter grinder
Specifications:Max. Grinding Length From Work
Head: 12.6"
Max. Grinding Diameter:
9.4" - 10"
Max. Grinding Wheel Diameter:
5.9"
A-Axis Work Head:
50 RPM
Rotary C-Axis:
120 Deg/sec
Linear Axis Movement:
600 IPM
Double End Grinding Spindle
Diameter: 2.75"
Spindle Motor:
16 HP
Spindle Speeds (Variable):
10,000 RPM
Machine Dimensions:
104" x 85" x 104" H
Approx. Machine Weight:
9,800 lbs
|
|
| Ad # 6623 | Horizontal Machining Centers (HMC) |
| 1998 |
OKK |
MCH-1000 |
Excellent |
Sold |
Photo /
More Info. |
| OKK MCH-1000 CNC HORIZONTAL MACHINING CENTER : OKK MCH-1000 CNC HORIZONTAL MACHINING CENTER
LONGITUDINAL TABLE TRAVEL (X-AXIS): 63"
VERTICAL TRAVEL (Y-AXIS): 50"
HEAD CROSS TRAVEL (Z-AXIS): 40.1"
PALLET DIMENSIONS: 39.37" X 39.37"
MAXIMUM PALLET LOAD: 4400 LBS.
NUMBER OF PALLETS: 2
NUMBER OF INDEX POSITIONS: 360
FEED RATE, ALL AXES: .04 - 472 IPM
SPINDLE HORSEPOWER: 30 HP
SPINGLE SPEED RANGE: 30 - 6000 RPM
SPINDLE TAPER: #50
NUMBER OF TOOL POSITIONS: 60
APPROXIMATE MACHINE DIMENSIONS: 289" X 193"
APPROXIMATE MACHINE HEIGHT: 158"
APPROXIMATE MACHINE WEIGHT: 65,500 LBS.
EQUIPPED WITH:
MITSUBISHI M-530MH CNC CONTROL WITH CRT, ETHERNET NETWORK CONNECTION, HIGH SPEED DIE MOLD SOFTWARE, FLOPPY DISC DRIVE, HELICAL CUTTING, GRAPHICS, RS-323 PORT, SYNCHRONOUS TAP, AUTOMATIC PALLET CHANGER, TWO 40" (1000mm) SQUARE PALLETS WITH 1 DEGREE INDEXING (360 POSITIONS), 60 STATION AUTOMETIC TOOL CHANGER, HEAVY DUTY GEARED SPINDLE WITH 3 GEAR RANGES, HEAVY DUTY SQUARE GUIDEWAYS, SPINDLE CHILLER, CENTRALIZED AUTO LUBRICATOR, THRU SPINDLE COOLANT, CHIP CONVEYOR, AND COOLANT SYSTEM.
CONDITION: MACHINE HAS SUPER LOW HOURS AND IS IN EXCELLENT CONDITION. |
|
| Ad # 6624 | Horizontal Machining Centers (HMC) |
| 2003 |
MORI-SEIKI |
SH-8000 |
Very Good |
Sold |
Photo /
More Info. |
| MORI-SEIKI MODEL SH-8000 HORIZONTAL MACHINING CENTER W/ FANUC CONTROL: MORI-SEIKI MODEL SH-8000 HORIZONTAL MACHINING CENTER WITH FANUC CONTROL
SPECIFICATIONS:
X axis travel: 51.2"
Y axis travel: 47.2"
Z axis travel 43.3"
Distance from table surface to spindle center: 2-49.2"
Distance from table center to spindle gage plane: 7.9"-51.2"
Working surface: 31.5x31.5"
Max workpiece swing diameter: 51.1"
Table loading capacity: 4,400 lbs.
Max workpiece height: 51.1"
Pallet surface configuration: Tapped
Table indexing time (90°/180°): 3.4/4.2 sec.
Max spindle speed: 10,000
Rapid traverse rate: 1,653 ipm
Feedrate: .01-826 ipm
Type of tool shank: CAT 50
Type of retention knob: Mori 90 deg. type
Tool storage capacity: 60 positions
Max tool diameter : 4.92"(12.6")
Max tool length: 19.7"
Max tool mass: 66 lbs.
Method of tool selection: Fixed address
Tool changing time tool to tool: 2/3 sec.
Number of pallets: 2
Method of pallet change: Turn type
Pallet changing time: 14 sec.
Spindle drive motor (30 min/cont): 40/33.5 hp
Feed motor (X/Y/Z): 7.9,9.8,9.8 hp
Coolant tank capacity: 184 gal
STANDARD ACCESSORIES:
MAPPS conversational graphic control
Load monitor C
Tool Life management
Chip conveyor inside machine (spiral type)
Coolant system
Shower coolant
Oil hole drill coolant system
Tool tip air blow system
Oil cooler
Automatic power off system
Built in worklight
Signal indicator
Hand tools
CONTROL:
Fanuc model 18Ita inluding Mori Seiki MAPPS conversational / Graphic
OPTIONAL ACCESSORIES:
6000 RPM spindle
External chip conveyor ( hinge type rear discharge )
Optical scale feedback
Through spindle coolant I/F ( center )
1000 PSI HP Cool Jet 70/30SF |
|
| Ad # 15591 | Horizontal Machining Centers (HMC) |
| 2002 |
DMG/Deckel Maho |
125-U |
Good |
sold |
Photo /
More Info. |
| 5 axis w/pallet transfer system: DMG model 25-U: 5 axis (B & G) Horizontal machining center with Schuller 7 ... |
|
| Ad # 8753 | Horizontal Machining Centers (HMC) |
| 2004 |
Okuma Flex Center |
30H |
Good |
sold |
Photo /
More Info. |
| 19" X 13" X 11": OSP-E-100M CNC Control
7.5 HP Spindle Motor
Two (2) 12.59" Square Pallets
1º Increment, 360 Position Pallet Index
19.68 X-Axis Travel
13.77" Y-Axis Travel
11.81" Z-Axis Travel
To 13000 RPM Spindle Speed
#30 Spindle Taper
24-Tool Position Tool Changer
2362 IPM Rapid Traverse Rates
48" x 189" x 97" High Approximate Machine Size
Equipped With Thru-the-Spindle Coolant
Rigid Tapping Cycles
Two (2) Tombstones
User Task 2
Tool Life Management
Cycle Time Reduction Function
Tooling Package
|
|
| Ad # 8735 | Horizontal Machining Centers (HMC) |
| 1996 |
Mazak |
FH-480 |
Good |
Sold |
Photo /
More Info. |
| 22" X 22" X 20": Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 22"
Z Axis Travels 20"
Pallet Index 1 Deg
Spindle Speed 35-12,000 RPM
Spindle Taper CAT 40
Tools 90
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rates 1,281 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 1.5 seconds
Palelt Change Time 5 Seconds
Tool Chagne Time (T-T/C-C) 1.5/84.6 Seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Mazatol M-Plus CNC Cotnrol
Auto Tool Length Measurement/Tool
Breakage Detection
Tool Life Management
Graphic Display
14" CRT
250 PSI Coolant Thru Spindle
90 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor
|
|
| Ad # 8739 | Horizontal Machining Centers (HMC) |
| 1983/4 |
Mazak |
H-12 HMC |
Good |
sold |
Photo /
More Info. |
| 24" X 18" X 18": Mazatrol M1 Control
Pallet Size (2) 19.7" x 19.7"
Pallet Incex 5 Degrees
Cross Travel (X) 24"
Vertical Travel (Y) 18"
Longitudinal Travel (Z) 18"
Spindle Speeds 5000 RPM
Spindle Drive 10HP
Spindle Taper CAT 40
Tool Changer 30 Tool ATC
Spindle Drive Motor Fanuc
|
|
| Ad # 8754 | Horizontal Machining Centers (HMC) |
| 1999 |
Okuma |
MX40HA |
Good |
sold |
Photo /
More Info. |
| 22" X 24" X 22": Pallet Size (2) 15.75" x 15.75"
X Axis 22"
Y Axis 24"
Z Axis 22"
Spindle Speeds 7,000 RPM
Main Motor 20HP
Rapid Traverse Rate 1181 IPM
Tool Magazine Cap 60
Spindle Taper CAT40
Equipped With OSP-7000M
Coolant Thru Spindle
1 Degree Indexing
Chip Conveyor
All Available manuals
|
|
| Ad # 8746 | Horizontal Machining Centers (HMC) |
| 1999 |
Mori Seiki |
MH-630 |
Good |
Sold |
Photo /
More Info. |
| 39" X 41" X 36": Pallet Size 24.7"x24.7"
Number of Pallets 2
Table Indexing Full 4th
Maximum Load On Table 3,300Lbs.
Spindle Spindle Speeds (RPM) 13,000
Spindle Taper 50
Main Motor (HP) 33.5 HP
Travels X Axis Travel 39.4"
Y Axis Travel 41.3"
X Axis Travel 36.2"
Tool Changer Tool Changer Positions 60ATC
Tool Change Time (Tool to Tool) 2.5 Seconds
Maximum Tool Weight 66Lbs.
Maximum Tool Length 19.7"
Equipped With Flood Coolant
Thru Spindle Coolant 300PSI
Chip Conveyor
Rigid Tapping
Tool Measure Probe
Boxed Way
2 Kurt Tombstones
2 Grit Pattern Tombstones
2 Base Plate Tombstones
Fanuc 18I
Voltage 220
|
|
| Ad # 8731 | Horizontal Machining Centers (HMC) |
| 2000 |
Kiwa |
KNH-400 |
Good |
sold |
Photo /
More Info. |
| 23" X 23" X 19": Pallet Size 15.75" x 15.75"
Max Workpiece Dia 21.65"
Max Workpiece Height 27.56"
Max Table Load 881 Lbs
Travels 23.62" x 23.62" x 19.68"
Rotary Table Full 4th Axis
Spindle Speed 10,000 RPM
Spindle Taper CT-40
Spindle Thru Coolant 215 PSI
Spindle Motor 25 HP
Rapid Feedrate 1,968 IPM
Feedrate 314 IPM
Toolchanger 64 Positions
Max Tool Dia 3.74"
Max Tool Length 11.81"
Max Tool Weight 17.6 lbs
Electrics 208/3/60 47 KVA
Floor Space 121" x 165"
Machine Height 103"
Equipped With Fanuc 18iM Control
Full Enclosure
Coolant Thru The Spindle
Lift Up Chip Conveyor
Flood Coolant System
Hydraulic Fixturing System
|
|
| Ad # 8750 | Horizontal Machining Centers (HMC) |
| 1995 |
Okuma & Howa |
40H |
Good |
sold |
Photo /
More Info. |
| 22" X 20" X 22": Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 20"
Z Axis Travels 22"
Pallet Index 360,000 (full 4th)
Spindle Speed 35-10,000 RPM
Spindle Taper CAT 40
Tools 40
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rate 1,181 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 2.5 Seconds
Pallet Chagne Time (T-T/C-C) 1.5/4.6 seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Fanuc 18M CNC Control
Full 4th Axis
Tool Life Management
Graphic Display
14" CRT
251 PSI Coolant Thru Spindle
40 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor
|
|
| Ad # 8723 | Horizontal Machining Centers (HMC) |
| 2001 |
Hitachi-Seiki |
MS-400H |
Good |
sold |
Photo /
More Info. |
| 22" X 20" X 22": Pallet Size 15.75"
X Axis Travels 22"
Y Axis Travels 20"
Z Axis Travels 22"
Pallet Index 1 Degree
Spindle Speed 35-10,000 RPM
Spindle Taper CAT 40
Tools 30
Main Motor 20/15 HP AC
Number of Pallets 2
Rapid Traverse Rates 1,575 IPM
Pallet Load Capacity 800 lbs
Spindle Torque 120 ft lbs
Spindle Acceleration 1.5 Seconds
Pallet Change Time 5 Seconds
Tool Change Time (T-T/C-C) 1.0/3.6 seconds
Max Tool Diameter 3.74"/5.90"
Max Tool Length 11.7"
Max Tool Weight 14 lbs
Equipped With Fanuc 21IM Siecos CNC Control
Tool Breakage Detection
Tool Life Management
Graphic Display
14" LCD
1000 PSI Chip Blaster Coolant Thru Spindle
30 Tool Magazine
Rigid Tapping
Niagara Flood Coolant
Chip Conveyor-Concept 1000 Dual Belt System |
|
| Ad # 8715 | Horizontal Machining Centers (HMC) |
| 1998 |
DAEWOO |
ACE H-80 |
Good |
sold |
Photo /
More Info. |
| 49" X 39" X 39": Fanuc 16MC CNC w/Color CRT Control
25/20 HP Spindle Motor
20-4500 RPM Geared Head Spindle Speed
ANSI (CAT) #50 Spindle Nose
Two (2) 31.5" Square Pallets
1º Increment, 360 Position Pallet Indexing
49.3" X-Axis Travel
39.4" Y-Axis Travel
39.4" Z-Axis Travel
60-Tool Capacity Automatic Tool Changer
Thru-the-Spindle Coolant System
Three (3) Chip Conveyors
Assorted Tool Holders as Available
Geared Head, Box Way Construction
472 IPM Rapid Traverse Rates all Axes |
|
| Ad # 8718 | Horizontal Machining Centers (HMC) |
| 2004 |
DMU Deckel |
Maho 100P |
Very Good |
sold |
Photo /
More Info. |
| 39" X 39" X 39": 40 Taper With 40 Pockets
18000 RPM Spindle
Spindle HP 100%=25
Spindle HP 50%=37
X Travels 1,000 mm (39.37")
Y Travels 1,000 mm (39.37")
Z Travels 1,000 mm (39.37")
Work Table
Clamping Surface mm 100 x 910
Number of T Groves/Size pce 9/18
Center Bore mm 50
Max Torque of table plate at 100% ED Nm 3,4000
Max Torque of Table plate at 40% ED Nm 4,900
Mac Table Top Speed U/min 30
Feed Degree/min 10,900
Resolution of measuring Degree 0,0001
Max Load capacity KG 2,000
spindle hrs: 5500
|
|
| Ad # 8726 | Horizontal Machining Centers (HMC) |
| 1994 |
KIA |
KH40A |
Good |
sold |
Photo /
More Info. |
| 21" X 19" X 19": Specifications Travel X 21.65"
Travel Y 19"
Travel Z 19"
Pallet Dimension 15.7" x 15.7"
Minimum Indexing Degree 1 Degree (std.)
Maximum Pallet Load 880 lbs.
Spindle Taper BT40
High 1060 - 6000 RPM
Spindle 10 HP
Axis Motor 1.5 HP
Capacity 50
Tool Shank BT40
Tool Call System Random/Bi-Directional
Equipped With Fanuc 15M CNC Controls
48 Work Offsets
200 Tool Offsets
Extended Memory 64M
Spindle Cooling System (+ - 4 deg. F)
Flood Coolant System and Standard Coolant Tank
Internal Spiral Chip Conveyor
Full Enclosure Work Light
APC Pallet Tables 16" x 16"
Warning Light Leveling Pads
Automatic Lubrication
Manuals & Electric Diagram
|
|
| Ad # 8717 | Horizontal Machining Centers (HMC) |
| 2000 |
DAEWOO |
DHP-630 |
Good |
sold |
Photo /
More Info. |
| 39" X 33" X 33": Pallet Dimensions (2) 24.8" x 24.8"
Travels: X-Axis 39.4"
Y-Axis 33.5"
Z-Axis 33.5"
Max Pallet Load 2,205 LBS
Feed Rate (All Axes) .04 - 630 IPM
Rapid Travers Rate (All Axes) 1260 IPM
Spindle: Motor 40 HP
Speed 12,000 RPM
Taper #50 CAT
Number of Tool Station 60 Position ATC
Equipped With:
Fanuc 16i CNC Control with CRT Automatic Pallet
Changer
Two 24.8" Pallets Automatic Tool Changer
Work Light Chip Augers
Chip & Coolant Shield Coolant System
|
|
| Ad # 8720 | Horizontal Machining Centers (HMC) |
| 1997 |
Hitachi-Seiki |
HG-400 |
Good |
sold |
Photo /
More Info. |
| 22" X 23" X 20": Pallets 16"
Travels 22" x 23" x 20"
30 Tools
12,000 RPM
NT 40 Taper
Fanuc 15M- B Control
15 HP
Through Spindle Coolant
Chip Conveyor
Rigid Tapping
|
|
| Ad # 8721 | Horizontal Machining Centers (HMC) |
| 1995 |
Hitachi-Seiki |
HG-800 |
Good |
sold |
Photo /
More Info. |
| 44" X 47" X 33": Fanuc 15MB (with Micon 16-3 controller)
Cat 50
4500 RPM.
30HP
Travels:
X-axis: 44”
Y-axis: 47.2” (option 1200mm added factory)
Z-axis: 33.0”
Pallet Size: 31.5”x31.5” (qty-2)
Table increment: 1 degree index
Tool Capacity (ATC): 60 Tools
Coolant thru spindle: Yes/ Rated 15KG/CM
Direct Tapping: Yes
Memory: 320 meters
Tool offsets: 200 sets
Automatic Tool length Measurement: Yes/
Installed
Tool life Management: Yes/ Installed
Cutting Monitor: Yes/ Installed
Chip Conveyer: Yes/ Rolling Filter
Prepared for High Pressure coolant
All Manuals & Service records available |
|
| Ad # 12611 | Horizontal Machining Centers (HMC) |
| 1999 |
OKK |
HM-80S |
Good |
SOLD |
Photo /
More Info. |
| —: (1999) OKK HM-80S,
(2) Pallet Size: 31.5" x 31.5"
X-Axis Travel: 39.37"
Y-Axis Travel: 33.46"
Z-Axis Travel: 32.28"
Table Indexing: 1 Degree Distance
Table Center to Spindle Nose: 7.9"- 40.2"
Distance - Table Top to Spindle Center: 1.2" -
34.6"
Maximum Load Capacity on Pallet: 2,424 Lbs.
Spindle Speeds: 35 - 12,000 RPM, Fanuc 16i-s
1000 psi through spindle coolant
25/30 hp motor
40 ATC
50 taper
Fanuc 16i-s control
35341 hrs. 15 min (run time, not cut time)
|
|
| Ad # 15560 | Horizontal Machining Centers (HMC) |
| 1991 |
Tsugami |
MA3 |
Fair |
Sold |
Photo /
More Info. |
| —: 1991 Tsugami MA3
(Multi-Station Pallet
Changer) Multi-Pallet
CNC Horizontal Multi-
Pallet CNC Horizontal
Machining Center,
Serial No: 4076
std mfg specs below-
please verify actual
machine
Specifications
Pallet Size / Number
of Pallets
11.75"x11.75"/10 plts
Table Load Capacity
176 lbs
Table Indexing 5
Degree Indexing
Pallet Change Time
12 Seconds
X-Axis Travel 13"
Y-Axis Travel 9.875"
Z-Axis Travel 15.75"
Spindle Nose BT - 40
Tpr.
Spindle Speed 70 -
6,000 RPM
Spindle Motor 7.5 HP
Spindle Center to
Table Top .75" -
10.625"
Gauge Line of
Spindle to Center
Pallet 4" - 19.75"
Tool Magazine
Capacity 64 Position
ATC
Tool Change Time
(tool to tool) 2.5
seconds
Rapid Traverse Rates
472 IPM
Cutting Feedrates
0.04 - 150 IPM
|
|
| Ad # 13436 | Horizontal Machining Centers (HMC) |
| 2000 |
Kira |
KN-40HB |
Excellent |
Sold |
Photo /
More Info. |
| Kira KN-40HB palletized CNC horizontal milling machine: Kira KN-40HB palletized CNC horizontal mill
model# Kira KN-40HB
Year 2000
Fanuc 21i-MA control
8,000 rpm spindle
20 tool arm type tool changer
2 pallet automatic pallet changer
Pallets are 400mm x 400mm
High speed rapid positioning, 48000mm/min for x,y,z
Stroke X 500mm, Y 400mm, Z 400mm
Fully integrated servo controlled rotary B axis
Spindle bearings replaced 2 years ago
Cannot load this machine onto a truck. Buyer will need to
arrange for a rigger to remove machine from present location. |
|
| Ad # 15298 | Horizontal Machining Centers (HMC) |
| — |
Mori Seki |
63 |
Good |
sold |
Photo /
More Info. |
| Mori Seki 63: Standard Mori Seki 63 MH MF-M6 controller...S/N
670...Tool...Cat 50...20 HP (need to
confirm)...3,600 rpm...X-39"...Y-31"...Z 29"...2
Pallet changer...24"x24"...2,200 lbs pallet
capacity
|
|
| Ad # 5055 | Horizontal Machining Centers (HMC) |
| 1996 |
Makino |
MCB 1310 9 Pallet |
Very Good |
SOLD |
Photo /
More Info. |
| MAKINO HM 1310 HMC with 9 Pallets (40" x 40" Pallets): CONTROL ................: Fanuc 16M Pro 3
PALLET SIZE.............: 40" x 40"
PALLET ROTATION ........: 360 DEGREE
CROSS TRAVELS
(X)...........................: 53"
(Y)...........................: 41"
(Z)..........................: 41"
SPINDLE SPEEDS...............: 12,000 RPM SPINDLE
DRIVE..................... ..: 40 HP SPINDLE
TAPER........................: CAT #50 TOOL
CHANGER .....................: 120 ATC EQUIPPED
WITH:
LINEAR PALLET SYSTEM (2)
WORK STATIONS
COOLANT THROUGH SPINDLE
PALLET MANAGEMENT CONSOLE
(9) 40" x 40" PALLETS
(12) PALLET STANDS |
|
| Ad # 15281 | Horizontal Machining Centers (HMC) |
| — |
LANSING |
— |
New |
sold |
Photo /
More Info. |
| —: 50" FACEPLATE
CHIP CONVEYER
5 FT BETWEEN CENTERS
CONTROL PANEL HAS JOGGED
HYDROLIC UNIT COMES WITH IT
15 years old but never used |
|
| Ad # 6272 | Horizontal Machining Centers (HMC) |
| 1995 |
Mitsu Seiki |
HT4A/F15M |
Very Good |
SOLD! |
Photo /
More Info. |
| Mitsu Seiki HT4A/F15M CNC Horizontal Machining Center: Fanuc 15M
256 MB Hard Drive
CAT 50
12,000 RPM
Full B
28" x 23" x 21" Travel
500 mm Pallet
Thru Spindle Coolant |
|
| Ad # 3068 | Horizontal Machining Centers (HMC) |
| 1992 |
DAEWOO ( TOSHIBA ) |
BMC80 |
Good |
Sold |
Photo /
More Info. |
| DAEWOO ( TOSHIBA ) CNC HORIZONTAL MACHINING CENTER: TRAVEL ( X ) ------------------ 63"
TRAVEL ( Y ) ------------------ 35.4"
TRAVEL ( Z ) ------------------ 39.4"
PALLET SIZE ( 2 PALLETS ) ---------- 31.5" X 31.5"
PALLET INDEXING ------------------ 1 DEG.
SPINDLE TAPER ---------------------#50 ISO
PALLET CAPACITY ------------------ 3300 LBS.
TOOL STORAGE CAPACITY ------------ 45 TOOLS
SPINDLE SPEED RANGE -------------- 20 TO 4500 RPM
MAIN DRIVE MOTOR - ( CONT./30 MIN. ) 20 / 15 HP
|
|
| Ad # 10420 | Horizontal Machining Centers (HMC) |
| 1994 |
Mori Seki |
M25-FH |
Excellent |
sold |
Photo /
More Info. |
| Travels 13.8” X Axis Travel , 14.56” Y Axis Travel, 7.87” Z Axis Trave: Manufacturer (3) Mori Seki HMC
Model M25-FH HMC
Year 1994
Table 11.8 x 11.8
Control Fanuc MF/M7 CNC Control
Travels 13.8” X Axis Travel , 14.56” Y Axis Travel, 7.87” Z Axis Travel
ATC 12
Taper 40
RPM 8,000
Equiped with:
180 Degree A/B Positioning Rotary Table
Tool Break Monitor
Chiller
Rigid Tap
Through Spindle Coolant
The travels are larger than quoted, call for info.
Price is for one, will give price break if all 3 are bought.
|
|
| Ad # 10423 | Horizontal Machining Centers (HMC) |
| 1988 |
Niigata |
— |
Good |
SOLD |
Photo /
More Info. |
| —: NIIGATA Model PN 40 HMC
S/N 14030 New: 1988
Specifications:
X Axis: 22”
Y Axis: l7.7”
Z Axis: 22”
Spindle speeds: 20,000 RPM
Pallet index: 360,000 deg.
Pallet size (Dual) l5.7” x l5.7”
Spindle taper: #40
No. of tools: 60 ATC
Motor: l5 HP
Equipped with
Fanuc 15 M Control
Full 4th Axis
Thru spindle coolant
Lift up chip conveyor w/auger
Work light
|
|
| Ad # 9384 | Horizontal Machining Centers (HMC) |
| 1998 |
Ingersoll |
HVM 600A |
Good |
sold |
Photo /
More Info. |
| Working Table Stroke 24.803"/40.55": INGERSOL MODEL HVM 600A HORIZONTAL MACHINING CENTER
X-Axis (Working Table Stroke)24.803"/40.55"
Y-Axis (Working Table Stroke)24.803"/40.55"
Z-Axis 23.62"
Feed Rate 3000ipm
Spindle Tool Adaptor HSK 63A
Spindle Max. Power 50HP
Spindle Max RPM 20000 RPM
Tool Storage 40 pockets
Chip Separator and Conveyor
Load Station with Pallet Changer
2 Machining Tombstones
Fanuc 15m Controller
Hydrostatic Spindle
|
|
| Ad # 5985 | Horizontal Machining Centers (HMC) |
| 1992 |
Mori Seiki |
M300 A-1 |
Very Good |
sold |
Photo /
More Info. |
| 300 mm Mori Seiki Horizontal Machining Center: Control Fanuc MF-M4
Travels:
X axis 15.7"
Y axis 11.8"
Z axis 19.5"
Automatic tool changer: 20 tool ATC
Spindle Taper: BT-40
Spindle RPM: 60 - 6000 RPM
Machine: 1 Degree B Axis, pre-wired 4th Axis
Chip conveyor with coolant tanks
Twin Pallet automatic built in |
|
| Ad # 15787 | Horizontal Machining Centers (HMC) |
| 2002 |
Okuma & Howa |
M-630H |
Good |
sold |
Photo /
More Info. |
| X-40", Y-32", (2) 24.8" Pallets, Fanuc 16M,: Okuma & Howa # M-630H
Horizontal machining
center with lots of tooling over 10k worth included-see picture
Std mfg specs below-please verify
actual machines
SPECIFICATIONS:
X-Axis Travel 1016 mm (40")
Y-Axis Travel 820 mm (32")
Z-Axis Travel 820 mm (32")
B-Axis Rotation 0.001 Degree
Pallet Size (2) 630 mm x 630 mm
Pallet Work Weight Capacity 1198 KG
Spindle Nose to Table Distance 150mm-970mm
Spindle to Table Center Distance
80 mm-900 mm
Spindle Speed: 60-10,000 RPM
Spindle Drive Motor 30 KW
Spindle Taper: 50
Number of Tools: 80 ATC
Rapid Traverse: 29997 mm/min
Feed Rate: 11989 mm/min
Aprroximate Dimensions:
5055 mmx3759 x mmx3404 mm
Weight: 16010 KG
Equipped With:
Fanuc 16M CNC Control
(2) 630 mm x 630 mm Pallets w/
Auto Changer
Spindle Air Blower
Spindle Oil Cooler
Enclosed Splash Guards
Chip Conveyor
std. mfg US SPECIFICATIONS:
X-Axis Travel .. 40.0"
Y-Axis Travel .. 32.3"
Z-Axis Travel... 32.3"
B-Axis Rotation .001 Degree
Pallet Size (2) 24.8" x 24.8"
Pallet Work Weight Capacity :2640 Lbs.
Spindle Nose to Table Distance 5.91"-38.19"
Spindle to Table Center Distance 3.15"-35.43"
Spindle Speed 60-10,000 RPM
Spindle Drive Motor 40 HP
Spindle Taper 50
Number of Tools 80 ATC
Rapid Traverse 1181 IPM
Feed Rate 472 IPM
Aprroximate Dimensions 199"x148"x134"
Weight 38,972 lbs.
Note:rigging,dismanteling , prepare for shipping & loading onto flat bed truck fee : estimated.
: $9800.00...adder
Note:will not fit into std.overseas shipping container... |
|
| Ad # 5900 | Horizontal Machining Centers (HMC) |
| 1981 |
NIIGATA |
EN50-F6M |
Good |
Sold |
Photo /
More Info. |
| EN50-F6M NIIGATA 3-axes CNC Horizontal Machining Center with Dual Pall: Pallet size: 19.69” x 19.69”
X-axis travel: 24.8”
Y-axis travel: 25.2”
Z-axis travel: 25.6”
Taper in spindle: CT45
Rotary indexing: +5 degrees (72 positions with curvic coupling)
Spindle speed range: 45 to 3500 RPM
Table weight capacity: 1,100 lbs.
Equipped with:
Dual pallet system
24-Automatic toolchanger
Coolant system
Coolant filtration unit
Tooling package consisting of:
(1) #45 boring head
(14) #45 Wizard quick-change chucks with (81) toolholders
(18) #45 end mill holders
(6) #45 cutter holders
(7) #45 drill holders
(38) straight toolholders
Miscellaneous spare parts
Miscellaneous perishable tooling
10 H.P. DC spindle drive
6M Fanuc 3-axis CNC control with CRT, keyboard and tapereader
Computer with monitor
Built-in chip conveyor
|
|
| Ad # 5901 | Horizontal Machining Centers (HMC) |
| 1999 |
HAAS |
HS-1RP |
Excellent |
Sold |
Photo /
More Info. |
| HAAS Four-axis Horizontal Machining center: Preowned HAAS Four-axis Horizontal Machining center, Model HS-1RP,new Decem... |
|
| Ad # 5893 | Horizontal Machining Centers (HMC) |
| 1984 |
NIGATA |
HN-50A |
Good |
sold |
Photo /
More Info. |
| 500mm NIGATA HMC with 10 Station Pallet Pool: Travels:
X = 35"
Y = 20"
Z = 20"
Pallet/Table Size: 20" x 20" (500mm)
10 PALLET SHUTTLE TABLE (11 TOTAL COUNTING ONE ON MACHINE)
FANUC 6MB
4TH AXIS ROTARY
80 STATION TOOL CHANGER
15 HP SPINDLE
CAT 50 TAPER |
|
| Ad # 5801 | Horizontal Machining Centers (HMC) |
| 2000 |
Okuma |
MA-60HB |
Excellent |
Sold |
Photo /
More Info. |
| 630 mm PALLET, 39.37” x 31.5” x 31.8 OKUMA HORIZONTAL MACHINING CENTER: Max. Machining Capacity: 39.37” x 31.5” x 31.89” ... |
|
| Ad # 12033 | Horizontal Machining Centers (HMC) |
| 1997 |
Mitsubishi |
M-H60E |
— |
sold |
Photo /
More Info. |
| X Travel 39.4'', : MACHINE SPECIFICATIONS:
* Pallet Size 24.75" x 24.75"
* Travel Y (long.) 39.4"
* Travel Y (cross) 31.5"
* Travel Z (vert)
* No. of Pallets 2
* Spindle Speeds 6000 RPM
* B Axis 360,000 Positions
* ATC, Tool, no. 120 Position
* Taper Of Tools CAT #50
* Rapid Traverse 797 IPM
* Spindle HP 25/20
Page 1 of 3
Item Description Quantity Price (USD)
* Max Tool Weight 33 lbs
* Approximate Machine Weight 40,000 lbs
MACHINE EQUIPPED WITH:
* Fanuc 16m
* 120 Tool ATC
* (2) Pallets
* Scales
* Helical Interpolation
* Spindle Chiller
* Full Guarding
* High Pressure Coolant Thru Spindle
* Rigid Tapping
* All Available Manuals
* Hand Pendent
* Mist Collection |
|
| Ad # 9240 | Horizontal Machining Centers (HMC) |
| 200? |
Takisawa |
T-200 |
Very Good |
sold |
Photo /
More Info. |
| 8" chuck -dia max 9.45 x 3.94 length: Chuck Size 8"
Max Swing Over Bed 16.5"
Max Turning Diameter 9.45"
Max Machining Length 3.94"
Main Motor 15 HP
Tools 10
Spindle Speed 4000 RPM
Spindle Bore 2.48"
Spindle Nose A2-6
Rapid Traverse Rates (X & Z) 945 IPM
X-Axis Travel 6.3"
Z-Axis Travel 7.87"
FEATURES:
FANUC 21iTB CNC CONTROL
Gantry Robot with Turnaround Device
Load / Unload Conveyor on Right Side
9" Monochrome CRT
8" Kitagawa N-08 Hydraulic Chuck
Chip Conveyor (Rear Exit)
Three Color Tower Light
(4) Machines Available |
|
| Ad # 7373 | Horizontal Machining Centers (HMC) |
| 2003 |
Mori Seiki |
SH-8000 |
Excellent |
Sold |
Photo /
More Info. |
| 2003 Mori Seiki SH-8000 CNC Horizontal Machining Center: (2 Machines) 2003 Mori Seiki SH-8000 26 Pallet LPP System
800MM Sized Pallets
Fanuc Cat 50
10,000 RPM
40HP
One Degree Indexing
51” X 47” X 43” Travels
240 Station Tool Magazines
Two Turbo Microfine Chip Conveyors
1000 PSI High Pressure Coolant Thru Spindle
Two Set Up Stations
Tombstones
Full Machine Specifications
One (1) 2003 Mori-Seiki SH-8000
Rigid Tapping
Pallet Size 31.5" x 31.5"
10000 RPM Spindle
40 HP Motor
400 Additional Pairs of Work Offsets
48 Set of Additional Work Coordinates
Flood Coolant System
Shower Coolant
1000 PSI High Pressure System
Full Enclosure
Twin Chip Augers
Chip Conveyor System (Turbo Microfine 2)
24 Pallet Stocker System – 2 Tier (12 x 2)
18 Tombstones for Part Work holding
A02B-0239-J946/J947 Memory Upgrade to 2560M = 1 Mb
Additional pallets (26 Total)
2 Set Up Stations (Load / Unload)
SRAM Memory Module (Data Servers)
Number of Pallets 24 Pallet Stocker
Table Load Capacity 4400 LBS
Table Indexing Time 3.4 Seconds
Table Surface To Spindle Center 2-49.2"
Table Center To Spindle Gage Plane 7.9"-51.2"
X - Axis 51.2"
Y - Axis 47.2"
Z - Axis 43.3"
Table Indexing One Degree
Spindle Drive Motor 40 HP
Spindle Taper CAT 50
Spindle Speeds 10,000 RPM
Rapid Traverse Rates 1653 IPM
Cutting Feedrate 0.1-1653 IPM
Auto Tool Change Capacity 240 Matrix
Max Tool Weight 66 LBS
Max Tool Length 19.7"
Tool Change Time 2.0 Seconds
EQUIPPED WITH:
Fanuc MSG 501 CNC Control
1280 Meters of Part Program Storage
Tool Breakage Detection
Cool jet 1000 PSI Coolant System |
|
| Ad # 7369 | Horizontal Machining Centers (HMC) |
| 1997 |
Mitsu Seiki |
HT4A |
Very Good |
Sold |
Photo /
More Info. |
| 1997 Mitsu Seiki HT4A CNC Horizontal Machining Center: 1997 Mitsui Seiki HT4A 4th Axis Horizontal Machining Center
Full Machine Specifications
Number of Pallets 2
Table Size 19.8" x 19.8"
Travels X, Y, Z 28.3, 23.62",21.65"
Table Load Capacity 3300 LBS
Table Indexing .001 N/C Contouring
Rapid Rates 945 IPM X, Y, Z
Spindle Nose CAT 50
Spindle Speed 50-12,000 RPM
Tool Magazine 60 ATC
Tool Change Time 3 Secs.
Pallet Change Time 8 Secs.
Main Motor 30 HP
Equipped With:
Fanuc 15 MB CNC Color Control
12 MB Ram
80 MB Hard Drive
1.4 MB Floppy Drive
Coolant Thru the Spindle
Scale Feedback
Spindle RPM Meter
Spindle Chiller
Full Enclosures
All Manuals, Parameter Sheets, and Schematics
Chip Conveyor |
|
| Ad # 7371 | Horizontal Machining Centers (HMC) |
| 2000 |
Mori Seiki |
MH 1003 |
Very Good |
Sold |
Photo /
More Info. |
| 2000 Mori Seiki MH 1003 CNC Horizontal Machining Center: Pallet Size 39.4" x 39.4"
2 Pallets
Travels 80.3" x 60.8" x 47.2"
1 Deg.
120 ATC
50 HP
Fanuc MSG 502 CNC
13,000 RPM
Chip Conv
Coolant Thru Spindle
Full Machine Specifications
Palelt Size 39.4" x 39.4"
Number of Pallets 2
X Axis Travel 80.3"
Y Axis Travel 60.8"
Z Axis Travel 47.2"
Pallet Surface to Spindle Center 2.0"-70.8"
Table Center to Spindle Gage Plane 9.8"-57.1"
Max Workpiece Swing Dia 78.7"
Pallet Load Capacity 6,600 Lbs
Max Height 61"
Table Indexing 1 Degree
Spindle Taper # 50
Spindle Speed 13,000 RPM (option)
Rapid Traverse Rate 787.4 IPM
Tool Storage Capacity 120 ATC
Max Tool Length 25.6"
Max Tool Dia 4.7"/14.2"
Max Tool Weight 66 lbs
Tool Change Time (Tool to Tool) 2.7
Main Motor 50 HP
Equipped With
Mori Fanuc MSG 502 CNC Control
Mapps Conversational Programming
Custom Macro B
Extended Y-Axis
13,000 RPM Spindle
Spindle Chiller
Coolant Thru Spindle (Din Style)
Synchronized Tapping
Auto Tool Length Measurement
Auto Tool Breakage Detection
Direct Scale Feedback
200 Additional Tool Offsets
Oil Hole Drill System
Work Platform
Chip Conveyor |
|
| Ad # 7370 | Horizontal Machining Centers (HMC) |
| 2000 |
Mitsu Seiki |
HU-63A |
Very Good |
Sold |
Photo /
More Info. |
| 2000 Mitsu Seiki HU-63A CNC Horizontal Machining Center: 30 HP
12,000 RPM
Travels 35.4" x 31.5" x 31.5"
1 Deg
CT 50
90 ATC
24.8" Pallets/2
Rigid Tap
Thru Spl Coolant
Chip Conveyor
Full Machine Specifications
Fanuc 16MB CNC Control w/ Color CRT
30 Hp Hi-Torque Spindle Motor
To 12000 rpm Spindle Speeds
Direct Drive Spindle
35.4" X-Axis Travel
31.5" Y-Axis Travel
31.5" Z-Axis Travel
Two (2) 24.8" Square Pallets
1º Pallet Indexing
CAT#50 Taper
90-Tool Capacity ATC
Linear Scale Feed Back System
Thermal Compensation
Rigid Tapping
Thru-the-Spindle Coolant
COOLJET 30-DF 1000 psig Coolant System
Chip Conveyor
Programmable Mirror Image
High Speed Machining Package
Full Enclosure
All Available Manuals |
|
| Ad # 7374 | Horizontal Machining Centers (HMC) |
| 2004 |
OKK |
HM-600 |
Excellent |
Sold |
Photo /
More Info. |
| 2004 OKK HM-600 CNC Horizontal Machining Center: 50 Taper
Full 4th
60 Tool ATC
12K RPM
Full Machine Specifications
Travels 30.71" x 29.53" x 31.50"
Spindle Speed 35-12,000 RPM
60 Postion ATC
Spindle Soft Scale
Fanuc Control 160iS-MB
True 4th Axis Machine-Table Rotates for 4th Axis
2 Pallets
1000 PSI TSC
CT 50
Spindle 40/33 HP
Chip Conveyor
2162 IPM Rapids
1280M Memory |
|
| Ad # 5726 | Horizontal Machining Centers (HMC) |
| 1997 |
Mitsui Seiki |
HT4A |
Very Good |
Sold |
Photo /
More Info. |
| Mitsui Seiki HT4A 4-Axis CNC Horizontal Machining Center: Table Size: 19.8" x 19.8" (500 mm)
Number of Pallets: 2
Table Travels:
X -Axis: 28.3"
Y-Axis: 23.62"
Z-Axis: 21.65"
Table Load Capacity: 3,300 lbs
Table Indexing: .001 N/C Contouring
Rapid Rates:945 IPM X, Y, Z
Spindle Nose: CAT 50
Spindle Speed: 50 – 12,000 RPM
Tool Magazine: 120 ATC
Tool Change Time: 3 Secs
Pallet Change Time: 8 Secs
Main Motor: 30 hp
Equipped with:
Fanuc 15MB CNC Color Control
12 MB Ram
80 MB Hard Drive
1.4 MB Floppy Drive
Coolant thru The Spindle
Scale Feedback
Spindle RPM Meter
Spindle Chiller
Full Enclosures
Chip Conveyor
All manuals, Parameter Sheets, and Schematics |
|
| Ad # 8218 | Horizontal Machining Centers (HMC) |
| Rebuilt |
— |
MH 63 |
Excellent |
Sold |
Photo /
More Info. |
| Mori MH63 Horizontal Machining Center - Totally Rebuilt: CNC: Fanuc 18i, 2008
New servo motors and drives.
New spindle motor and drive.
X - 39.4" Y - 31.5" Z-29.5"
Pallets: (2) 630mm x 630mm
ATC: 60 Stations
1 degree indexing table
Spindle taper: CAT #50
Spindle speed: 3600 rpm, gear head
Through spindle coolant
Chip Auger
|
|
current group
groups previously viewed
groups not yet viewed
