Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 4358 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1996 |
Atrump |
K5V |
Good |
sold |
Photo /
More Info. |
1996 Atrump Vertical 3-axis cnc knee Mill: 1996
M40 Centroid Controls
PC Based Control with Network adapter
Large PC Hard drive for program storage
Travel x: 38” y: 17” z: 6”
5 Horsepower Motor
40 Taper Spindle, Speed 70-425 Low/600-3600
High
|
|
Ad # 15979 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Bridgeport |
Series I |
Excellent |
sold |
Photo /
More Info. |
: Offered for sale is a Bridgeport Series I in
excellent condition.
Currently under power and located in a one man
machine shop that is being liquidated.
A few years ago, I upgraded this machine to a 2
axis cnc with 3 axis readout by installing an
Anilam Millpowr control and an A&T power
drawbar.
There is a 4 inch riser installed on the
column.
The head was gone thru only a couple of years
ago and is in excellent condition.
Ways are chrome and they are in excellent
condition
There is a new automatic oiler pump installed.
This machine is incredible for 2 axis work as
the control accepts a .dxf file, and if done
correctly is Very fast and accurate. The
technique is a little difficult to discover,
but extremely simple to use, and I will give it
to the buyer.
Original manual and software included
May be able to load on your trailer or truck |
|
Ad # 8066 | CNC & Retrofit Knee / Bed Mills w/o ATC |
80's ?? |
Bridgeport |
Series 1 CNC |
Good |
sold |
Photo /
More Info. |
3 axis cnc knee mill-bridgeport 3series 1 w/ centroid control: upgraded centroid control-cnc # 4
3 axis cnc knee mill-bridgeport series 1 w/ centroid control
RS232
floppy drive
mist coolant
no manual hand wheels for table
2 hp
0-4200 RPM
|
|
Ad # 5549 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Alliant |
Series 1 |
Very Good |
Sold |
Photo /
More Info. |
ALLIANT SERIES 1 CNC MILL: Proto Trak MX-2 control,
Boring Head,
Super Spacer,
Kurt Vise,
(8) misc toolholders,
(2) drill chuck. |
|
Ad # 14477 | CNC & Retrofit Knee / Bed Mills w/o ATC |
96 |
Southwestern Industries |
TRAK - TRM |
Good |
sold |
Photo /
More Info. |
1320lb on table: 2-Axis CNC
220/440-3Phase, 3 HP
10 x 50 inch Table
4200 Max RPM
CAT 40 Spindle
31" x 17" x 23.5" mfg spec travels |
|
Ad # 11766 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1980s |
Lagun |
100 |
Excellent |
sold |
Photo /
More Info. |
Lagun Matic 100E 3 AXIS CNC: Lagun Matic 100E
3 Axis CNC
9" x 42" Table
Year: 1980s
Serial: 18180
Voltage: 220 3 Phase
Control: Dynapath Delta Series
Model : Detal 20-ME
Serial : 64560
|
|
Ad # 12982 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1977 |
Cincinati |
N/A |
Good |
sold |
Photo /
More Info. |
Over All Table Work Surface 48" x 12": Cincinati Tool Master
Digital Readout
Power Feed
Baush And Lomb Accu Rite Controler
Dual Axis
Table Working Surface 45" x 12"
Table Working Surface Overall 48" x 12"
# Of Tee Slots / 3 - Size 16mm
Distance Between Slots 2 3/4 "
Spindle Nose Speeds 80-480 & 600-3600
Head Tilt Left and Right - 45 Degrees
Quill Feeds-.0015,.003,.006 IN Inch Per Revalution Of Spindle |
|
Ad # 9841 | CNC & Retrofit Knee / Bed Mills w/o ATC |
? |
Bridgeport |
CNC R2E3 |
Good |
SOLD |
Photo /
More Info. |
38"x15" Table: Bridgeport 3 Axis CNC Vertical Mill, Overall
Working Surface of Table: 37-3/4" L-R x 14-7/8" F-
B
Table Travel – Longitudinal (X-Axis): 30", – Cross
(Y-Axis): 15"
Table Positioning Speed: 200" / Min.
Vertical Travel of Knee: 13"
Throat Distance: 16"
Spindle Speeds (Inf. Variable): 60 – 4200 RPM
Spindle Feeds: Inf. Variable
Spindle Travel (Z-Axis): 5"
Spindle Taper: No. 30 Quick Switch
Spindle Motor: 2 HP 3/60
|
|
Ad # 9036 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2001 |
Atrump |
B3VC |
Very Good |
Sold |
Photo /
More Info. |
bed mill-3 axis: -ATRUMP B3VC CNC BEDMILL
-TRAVEL X: 31 1/2" Y: 16" Z: 18 1/2"
-R-8 SPINDLE
-PNUEMATIC DRAWBAR
-SPINDLE SPEED 50-4000
-SPINDLE MOTOR 3HP, 3PHASE 220V
-M15 CENTROID CONTROL -110V
-MULTIPLE WORK COORDINATE SYSTEMS
|
|
Ad # 2228 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
Lagun |
FTV-2 |
Excellent |
Sold |
Photo /
More Info. |
Lagun Millmatic III Deluxe DL -3 axis knee /AutoCon 50 M Color Monitor: color CRT screen w/ graphics
4hp main motor
x,y,z travel 32"x17"x7"
work piece table load 1500 lbs;
auto tube;
table size 58"xll";
knee travel 24";
spindle taper #40 NMTB;
rpm:55-4200;
positioning accuracy +/- .0004"; repeatibility +/- .0001"; output resolution.0001";
feedrate over 0-150%(all axis)
coolant built in
head tilts left to right
manual or cnc quill -hard to pull doesnt disconnect ball screw
air power draw bar;
500+ imp rapid travel upgraded;
400 mb hard drive;
3 1/2" floppy disc drive;
conversational graphics programming & G code software help;
RS-232 serial port;floppy drive
MPG hand control x,y,z axis
programmable speed control
riser block 4"
arranged for manual or cnc operation;
swivel head
tapping feature with floating head
cnc quill only, not manual.
Control: Dynapath# Model 50M- w color monitor...
mpg handwheel included
program RPM featue
high speed feed kit...table travel upgrade
No tooling included
Machine hrs as of-8-7-10: 1686 hrs |
|
Ad # 2229 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1998 |
Lagun |
KMC717S |
Excellent |
Sold |
Photo /
More Info. |
Lagun CNC KneeMill Model KMC171S with AutoCon Control 3 Axis: Spindle Power: 7.5hp
x,y,z travel 32"x17"x7";
spindle to colum max. 29";
work piece load 1500 lbs;
accurate removal rate 8 cu in. per minute;
4 3/8" diameter spindle (quill);
auto lube;
table size 58" x 11";
knee travel 24";
spindle taper #40 NMTB;
Spindle rpm 55-4200;
max distance spindle to table 29";
drilling mild steel 1.5";
positioning accuracy +/- .0004";
repeatability +/- .0001";
output resolution .0001";
feedrate override 0-150% all axis;
coolant built in;
power draw bar;
350 imp rapid;
400 mb hard drive;
3 1/2" floppy disc drive;
conversational graphics programming help;
RS-232 serial port;
8" riser block;
micro switch travel stop |
|
Ad # 7987 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
SHARP |
|
Excellent |
sold |
Photo /
More Info. |
9 X 42 INCH TABLE, 2 axis cnc/manual mill: 9 x 42 table
R-8 quill
3HP
This unit is in exc. condition, has a fully tiltable,
rotatable head; tilt is +/- 90 degrees and rotates
left/right 160 degrees.
ANILAM 1100, 2 axis CNC control ( x & y ).
The lube system is a manual "One Shot" |
|
Ad # 9002 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2005 |
Milport |
MK4 RHINO |
Excellent |
sold |
Photo /
More Info. |
: THIS UNIT HAS NO TOOL CHANGER. IT COMES WITH NO TOOLING OR VICES. IT DOES H... |
|
Ad # 13657 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1997 |
Servo |
5000 |
Good |
sold |
Photo /
More Info. |
10" x 54": Servo Model 5000
Control Servo
3 Axis
Year: 1997
Voltage: 220 Single Phase
10" x 54" table
40 Taper Spindle
Air Draw Bar |
|
Ad # 14399 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2002 |
Atrump/top-one |
10B |
Good |
sold |
Photo /
More Info. |
travels are X31.5 x Y19 x Z21 x Manual Quill 5”travel: Atrump/Top One manual/cnc bed mill
manual or cnc quill control
control:centroid #M400
14" x 52" table
travels are X31.5 Y19 Z21
Quill 5”
control: centroid M-400
spindle : 40 taper NMTB
5 HP motor
auto lube
air draw bar
note: a few holders tooling included
1/4”
(2) 3/8”
(2) 1/2”
(2) 5/8”
(2) 3/4”
(1) 1”
(1) shell mill with 1” arbor
(1) shell mill with 1-1/4” arbor
no vise included
this machine is full 3 axis: manual axis
control or cnc control with
conversational or g code programming
capability on a great easy to use centroid
control,runs good ready to go!
|
|
Ad # 12847 | CNC & Retrofit Knee / Bed Mills w/o ATC |
N/A |
Clausing |
FV-1 |
Good |
sold |
Photo /
More Info. |
4" x 49" table: 2 axis cnc: Clausing Kondia CNC Mill-2 axis
Table Size 4' x 49"
Variable Speed head
Model-FV-1
H.P 5
Voltage: 220
Phase: 3
Controler: Proto Trax Plus
Air Draw Bar
RPM: Low Speed: 60 to 500:High Speed:500to 4000
Power Feed
Have Manuals for Mill and Controller |
|
Ad # 2182 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1984 |
HURCO |
KMB-1 |
Good |
Sold |
Photo /
More Info. |
40" x 14" CNC Knee Mills: table: 40" x 14"
travels: 24"x x 14"y x 15" Z
2.5/5HP
150-3600RPM
control:Hurco BX
ridged head
drill capacity: 7/8"
new spindle drive
includes quick change tooling
manual knee
6" quill travel
500Lb table capacity
mist coolant
manuals included
|
|
Ad # 12796 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2003 |
Milltronics |
MB18 |
Excellent |
sold |
Photo /
More Info. |
32' x 19" x 22.5": Specifications:(are accurate to the best of our
knowledge)
· Milltronics 3 Axis CNC Vertical Mill
· TABLE SIZE - 13" X 55"
· TABLE TRAVEL, LONGITUDINAL - ( X ) 32"
· TABLE TRAVEL, CROSS - ( Y ) 19"
· QUILL TRAVEL - 5"
· TRAVEL, VERTICAL - ( Z ) 22.5"
· SPINDLE SPEED RANGE VARIABLE - 4500 RPM
· SPINDLE TAPER - #30
· RAPID TRAVERSE RATE - 200 ipm
· FEEDRATE RANGE - 200 ipm
· SPINDLE MOTOR 5 HP w/INVERTER DRIVE
· ELECTRICS - 220/60/3
· APPROXIMATE MACHINE WEIGHT - 6,000 LBS.
· APPROXIMATE MACHINE DIMENSIONS - 60"LR
x 76"FB x 82"H
Equipped with
· CENTURIAN VI 6 3-AXIS CNC
CONVERSATIONAL CONTROL - PC BASED
· RS-232 PORT
· GRAPHICS FUNCTIONS
· FULL 3-aXIS SIMULTANEOUS CNC
· HARDENED & GROUND BOX WAYS ON SADDLE
& COLUMN
· POWER DRAW BAR
· COOLANT SYSTEM w/CHIP PAN |
|
Ad # 10759 | CNC & Retrofit Knee / Bed Mills w/o ATC |
mid 80,s |
bridgeport |
series 1 cnc |
Very Good |
SOLD |
Photo /
More Info. |
9x48 2 axis: 60-4200 rpm
2hp motor
light
9x48 table
long. table travel 24"
cross table track 12"
knee travel 16"
bridgeport control |
|
Ad # 6806 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
Acer |
E-1350B |
Very Good |
sold |
Photo /
More Info. |
3 axis- Bedtype Milling Machine w/ manual wheels & quill: ACER E-mill Bed Type Milling Machine
Sony 3-Axis CNC Control
Auto Lube System
C5 Ball Screws and Bearings
Built-in Coolant System
Halogen Light
Full Length Splash Guard & Chip Pan
ULTRA HIGH QUALITY ACER E-MILL MILLING
MACHINE:
5 HP "Super E" Baldor Motor
Infinite 50 ~ 3,750 RPM Speed AC Frequency Drive
HRC 52° Hardened and Ground Table
Turcite-B Coated Slide-way and Gibs
Precision Spindle w/ ABEC-7 Bearing
Meehanite Casting
Automotive Painting
Rugged 13" x 50" Table Size
1-1/4" Diameter Ball Screws with Casted Mounting
Brackets
Hardened & Ground X, Y, & Z Table Top and Bottom
to HRC 52°
XYZ Travel: 32" x 19" x 23"
N.S.T. #40 Taper
Class 7 Precision Spindle Bearing
Precision 4" Diameter Hard Chromed Quill at HRC
62°
Turcite-B Lining Saddle Ways to Reduce Metal
Wear
Max. Load on Table: 1,700 lbs. |
|
Ad # 7936 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2007 |
Atrump |
3VK (2+1) |
New |
Sold |
Photo /
More Info. |
CNC/Manual Knee Mill 10" x 50" table(single phase): ATRUMP Aone 3VK 2plus1
MODEL # 3VK 2+1
5HP Spindle Motor & inverter upgrade(single phase)
30 NST Spindle Taper
5,000 rpm spindle speed
Auto Lubrication
Coolant System w/Chip Tray
Machine finished in Taiwan
MACHINE FEATURES-
Centroid control M400S
lMachine finished in Taiwan with China casting
5 HP Spindle Motor, R8 Spindle Taper
5,000 rpm spindle speed with HI-LO gear
Hardened & Ground with turcite-B coating guide way
lPrecision ballscrews for high accuracy and long casting
FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
lAnti rust chrome quill
lBox ways design on Y-axis to provide maximum rigidity & stability
lStandard way cover on three axes
lTool box & Tools
lPrecision APEC class7 spindle bearing to ensure spindle run out within 0.0002
lAutomatic lubrication system
lBuilt-in Quartz work light
lHard limit switch
2-axis Constant CNC , plus 3rd axis scale & motor
Specification:
Table:10” x 50”
Longitudinal travel (X-axis):31”
Cross travel:14 1/2”
Z axis travel cnc quill:5” (manual), 4” (cnc)
Knee travel (manual): 16”
Quill diameter: 3.375” (86 mm)
Spindle nose to table top (D):0.75”-16.75” (20 - 426mm)
Load capacity:600 lb.
Spindle taper:R8
Spindle Speed (r. p.m.):70 to 5000 rpm with Hi/Lo gear
Transmission of spindle & motor: Timing Belt
Spindle center to column front surface:6.875” to 27.875” (175 - 707mm)
Head:
Swivel (left/right):90 degree
Tile (front/back):45 degree
Motor:
Spindle motor/max torque:
3 HP (Std.) 5 HP (Opt.) included (single phase)
KVA rating: 4 KVA, 15 amps
Coolant pump (optional)1/8 Hp-added
Lubrication pump:Automatic
Power requirement:4 KVA, 3 Phase 208-230 voltage
Length X Width X Height (LXWXH):102” x 77” x 84”
Net Weight:3,100 lbs. (1420 Kgs)
|
|
Ad # 14795 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1998? |
Milltronics |
MB 20 A |
Good |
sold |
Photo /
More Info. |
54" x 16": 1998 Milltronics Partner
Table:54" x 16"
MD 20A
Milltronics control series C
230 Volts
Travels 40" x 20" x 24"
6" Quill
CT 40
Max Table weight 2500lbs
60-4000 RPM
Note : replaced std.cathode ray display
with a flat screen as shown
Vise not included |
|
Ad # 14796 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
Acer |
1350 |
Good |
sold |
Photo /
More Info. |
13" x 50" Table: Acer 1350 Bed Mill
Year 2000
Control:Sony NU 20/30
13" x 50" Table
Travels 20" x 40" x 20"
Quill 5"
Air draw bar
Spindle taper: BT 40
Vise not included.
|
|
Ad # 10693 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2001 |
Sharp |
LMV-50/MP-3 |
Excellent |
sold |
Photo /
More Info. |
3 axis -Acu-rite mill power : 3 Axis Acu-rite Mill Power unit-new style on a sharp mill
manual or cnc control
simple conversational programming
travels: 12" x 34"
3 hp
R-8 spindle
air draw bar
auto lube
9 x 50 table
|
|
Ad # 7889 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1996 |
Milltronics |
MB16 |
Good |
sold |
Photo /
More Info. |
3 axis-CNC Bed Mill with 10x50 table: Milltronics model MB16 CNC Bed Mill with Centurion one control
3 axis cnc bed mill
10x50 table,
travels 30x16x16.
Trico auto lube system
power draw bar,
R-8 spindle size,
rebuilt in 1998, needs new belt
needs 7ft max height clearence to move-tilt head |
|
Ad # 14290 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1973 |
Milltronics |
Partner |
Good |
sold |
Photo /
More Info. |
50" x 10" Table: Milltronics CNC Milling Machine
Model: Partner
Capacity: 50" x 10' Table
Electrical: 230/ 3 phase
Specifications:
Spindle Taper R-8
Table travels: X axis 30 " Y axis 15" Z axis
5.5"
Vertical knee travel 16"
Spindel Speed range, Low 60-500 rpm High 500-
4200
In photo, computer monitor in use because CNC
monitor no longer works. |
|
Ad # 10657 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
Acer |
E1350B |
Excellent |
sold |
Photo /
More Info. |
13 x 50 table, 40 taper: 13 x 50 table
travels: 32" x 20 x 23"
0-3750 RPM
Auto lube
Work Light
coolant
splash guard
table load 1500Lbs max
NST40 taper spindle
Manual pulse generator-XYZ
floppy drive
AC brushless servos
manual hand wheel on y axis only
Sony Millstation Control-features below
3 axis contouring: built in 25 machining cycles:
pocket, drill, frame, o-ring, island, facing, many
more..1 gig hard drive, windows 95 operating
system, color LCD display, graphic interface,
conversational programming, or G code generated
from cad cam, morror image, , rotate, scaling,
repeat, trig assist,
EVS Acer head
can rotate head left to right, not in /out
Air power draw bar
5HP |
|
Ad # 11555 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Bridgeport |
Eztrak |
Good |
sold |
Photo /
More Info. |
9"x52" Table Series 1-3 axis: Bridgeport Series 1 Eztrak
9" x 48" Table
3 Axis cnc
Controller BPC 2M
Machine needs cleaning but runs fine |
|
Ad # 12640 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1996 |
ACER |
3V-K |
Good |
sold |
Photo /
More Info. |
2 Axis cnc/manual mill- ACER: Acer 2 Axis CNC/manual retrofit knee mill
Acu-rite Control
3V-K Model
vari speed head 50-4200rpm
air draw bar
mister unit
220/440 volt
Three-phase
60 Hz
3 HP
Variable speed spindle
Hardened and ground dovetail ways
10" x 50" table
Table travel x-axis 34"
Saddle travel y-axis 16"
Quill travel 5"
Knee travel z-axis 16"
Ram travel 24"
Throat distance 4.25" to 28.25"
Owners manual
Approx 2,500 lbs and 88" height
Requires a 7' x 10' floor area
note: no tooling..vise not included
|
|
Ad # 11512 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1987 |
Chevalier |
Falcon 2040B |
Good |
sold |
Photo /
More Info. |
13 x 54 table: Chevalier 2040B-3 axis cnc bed mill
13 x 54 table
travels: 20" x 40"
Control: Autocon delta 40M
floppy drive, RS-232 port
VS head 3 HP-bridgeport style
MPG remote hand wheel
cat 40 sindle taper
manual quill not table feeds
all manuals
1 owner |
|
Ad # 9644 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1997 |
Sharp |
LMV |
Excellent |
sold |
Photo /
More Info. |
9 x 42" : 2 axis cnc knee mill w/ 3 axis readout: 2 axis cnc with manual hand wheels
3 axis readout display
3 HP
Kurt air power draw bar
variable speed type head-manual control.
9x 42 working surface
Travels:x=25,y=18,knee travel-16"
R-8 collets shown not included
vise incl.,but no collets
Auto Lube system..
spindle to column 6-3/4 to 18-1/2
Control:Anilem 3200mk -2 axis w/floppy & RS-232 PORT P/N # A7320002 S/N # 9020417018
all books with machine
machine has approx 500 hrs on it very light work..
|
|
Ad # 7854 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1994 |
Bridgeport |
V2XT |
Very Good |
sold |
Photo /
More Info. |
3-Axis Bridgeport CNC Mill: Control: V2XT/DX 32
Table: 9" x 48"
Travels:
X: =30"
Y: = 12"
Z: = 5"
Spindle: CAT 30
Spindle Power: 2 hp
Programmable Spindle Speeds
Spindle Speed Override
Auto Lube
Mist Coolant
Programming Manuals |
|
Ad # 14748 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
HH Roberts |
BM-40-Q1 |
Good |
sold |
Photo /
More Info. |
10 x 50 table: HHRoberts BM-40-Q1 CNC Bed Mill
10 x 50 table
3/5HP spindle motor
Coolant system or Mister
Auto Air Tool Changer
Serial# 877676, PO 1837 11.98
DOM: 07.1999
Anilam 5300 MK CNC Control
TILTING QUILL
AUTO OILER FOR WAYS & BEARINGS
G-Code, Manual, Conversational, & CAM
230 VAC Single Phase or 230 VAC 3 Phase
10 HP Motor, 21 Amps
Price includes all tooling, as following:
- KURT D688 Manual Vise, 6" w/ 8.8" opening
- PRECISION OFFSET HEIGHT SET & EDGE FINDER CNC
MILL MILLING
-8" Master Precision level
-Spray Mist Unit for Cutting and Grinding
Applications
-GRANITE CHECK STAND SURFACE PLATE & DIAL
INDICATOR GAGE
-(58 PC) 5/8" Slot 1/2" Stud HOLD DOWN CLAMPING
SET KIT
-KURT Precision DIAL INDICATOR +MAGNETIC BASE
FINE ADJUSTMENT+22 POINT SET + CASE
-(6 PC) 1-2-3 Block Set 0.0001" Precision
Matched Mill Machinist 123 23 Holes
-CAT40 CNC TOOL HOLDER TIGHTENING FIXTURE
-HAAS CAT40 TOOLING PACKAGE ER32 ER16 COLLET
SET END MILL HOLDER DRILL CHUCK NEW
Including:
6 PC END MILL HOLDER
5 PC ER32 COLLET CHUCK
3 PC ER16 COLLET CHUCK
12 PC ER32 COLLET SET BY BOTH 1/16
7 PC ER32 COLLET SET COMMON SIZE
10 PC ER16 COLLETS SET BY 1/32
3 PC Keyless Drill Chuck 1/2"
With Free HAAS pull stud, can be used on any
HAAS cat40 spindle machine
SPANNER WRENCH ON COLLET CHUCK
ALL END MILL HOLDER, COLLET CHUCK AND DRILL
CHUCK ARE HIGH SPEED PROVED AND BALANCED TO G2.5 @
20K RPM TO MEET ALL INDUSTRIAL REQUIREMENT |
|
Ad # 13444 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1994 |
Milltronics |
3VX |
Good |
sold |
Photo /
More Info. |
3 Axis CNC: Seiki X-L Model 3VX
Milltronics Centurion 1 Control
Voltage 220
3 Axis Machine
10" x 50" Table
30 Taper Quickchange Tool holder
60-4200 RPM
RS 232 and Floppy Port
Year 1994 |
|
Ad # 14736 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
HH Roberts |
TW32Q |
Good |
sold |
Photo /
More Info. |
10 x 50 table: 3 axis bed mill: HH Roberts cnc/manual bed mill
3 axis control
control: Anilam 3300MK
10 x 50 table
travels: 30"X,16"Y,22"Z
works manually or CNC
|
|
Ad # 13442 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1985 |
Hurco |
MKX |
Excellent |
sold |
Photo /
More Info. |
Hurco 3-Axis CNC Mill: • Hurco 3-Axis CNC Mill
Under power
•Great condition
•Been upgraded allows mc program
•All manuals
|
|
Ad # 8581 | CNC & Retrofit Knee / Bed Mills w/o ATC |
90's |
Clausing/Atlas |
4BVSCNC40 |
Very Good |
Sold |
Photo /
More Info. |
10 x 54 table: 10 x 54 table
28 x 16 travels
3 HP
Auto lube
3D Milling
Fagor # 8040M conversational/G code control
Air power draw bar
oil skimmer
0-4000 RPM
30 taper NMTB spindle
|
|
Ad # 8580 | CNC & Retrofit Knee / Bed Mills w/o ATC |
90's |
Lagun |
3L Deluxe |
Very Good |
Sold |
Photo /
More Info. |
11 x 54 Deluxe-3 axis cnc w/ manual control: 11 x 54 ?? table
3 axis Anilam 1100M control
Manual or CNC W/ manual quill
30 taper Erickson spindle
33" travel in X , 18 " in Y
4 HP
Power Knee feed
Factory -SPECIFICATIONS
Table Size (in.)
11 x 58 ????
Table T-slot (in./W x No. x Pitch)
5/8 x 3 x 2-1/2
Weight on Table (max./lbs.)
1,500
Table Longitudinal Travel - X-axis,
Manual/with Power Feed (in.) 38/35-1/8
Table Cross Travel - Y-axis (in.) 18
Table Knee Travel - Z-axis (in.) 16-7/8
Ram Travel (in.)
22-3/16
Spindle Taper
NST-40
Quill Diameter (in.)
3-3/8
Quill Travel (in.)
5
Number of Spindle Speeds
Infinite Variable Speed
Range of Spindle Speeds (RPM)
55 - 4,250
Power Quill Feeds (in./rev.)
0.0015, 0.003, 0.006
Head Tilt, Front/Rear ± 45o
Head Swivel, Left/Right ± 90o
Distance Spindle to Table (max./in.) 18
Distance Spindle to Column (min./in.)
5
Distance Spindle to Column (max./in.)
27
Column Turret Diameter, Graduated (in.) 16
Knee Width (in.) 15-3/4
Knee to Column Bearing Length (in.) 19
Saddle and Table Bearing Length (in.) 26
Ram and Turret Bearing Length (in.) 19
Ram Length (in.) 36
Main Motor 4 HP,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Overall Dimensions (in./W x D x H) 73 x 63 x 90
Net Weight (lbs.) 3,800
STANDARD EQUIPMENT
• Hardened and Ground Table Surface and Ways
• Draw Bar
• One-shot Lubrication System
• Complete Flood Coolant System
Made in Spain
• Special high strength gray iron Meehanite® castings with physical and chemical properties providing low clamping capacity, high modulus of elasticity, and excellent wear characteristics
• Head is mounted to heavy duty ram with knuckle joint, for maximum rigidity. Worm gear arrangement provides head tilts ± 45° front to rear and swivels ± 90° left to right for added versatility. Head and ram assembly can be easily rotated a full 360°
• 4 HP Constant, manual variable speed drive, dynamically balanced head with high velocity cooling system
• 55 - 4,250 RPM Infinite variable spindle speed in hi-low ranges for maximum torque and horsepower. Round tooth timing belt for high torque at low speed ranges
• Hard chromed 3-3/8" diameter quill with precision ground rack
• Four Fafnir® P-7 (or Barden® P-7) spindle bearings on super precision NST-40 taper spindle.
• Head mounted with forward-neutral-reverse switch and column mounted coolant on-off switch
• The high tensile strength castings normally have a Brinnell® hardness of 190 to 230HB while hardened surfaces, such as: ways, table top and front, are approximate 480HB, or about Rockwell® 50C scale
• Precision hardened and ground table surface, and with combination box and dovetail design hardened and ground ways
• Rigidity of a bed type mill and capacity of handling 1,500 lbs. maximum heavy work load with unique 3" diameter outboard column support, can be manually clamped
• Convenient front located table and saddle locks. Clamp handles are spring loaded to allow repositioning once locked
• Leadscrews rolled and ground to provide better accuracy and with a high nickel content to improve durability. Adjustable anti-backlash nuts allow for compensation as the machine ages
• Double nut assembly provides backlash adjustment of longitudinal and cross feed screws to eliminate backlash due to wear
• Anti-friction bearings are used throughout the machine
• One-shot central lubrication system provides oil to all sliding surfaces, nuts and leadscrews
• Complete flood coolant system is standard equipment. Pump is located on top of reservoir machine base inside the column
• Standard base chip pan as options
• Voltage required for 220V/440V/3 Phase/60 Hz., prewired 220V
|
|
Ad # 16032 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2003 |
Kent USA |
TW-32QI |
Good |
sold |
Photo /
More Info. |
x 31" y 17" z 18": Great bed mill. New Centroid M400S
conversion with color LCD display. 3 axis. Full
CNC or manual operation. This is a good machine.
We are almost exclusively Milltronics and no one
has taken the initiative to learn this control so
I'm getting rid of it to make room. |
|
Ad # 14666 | CNC & Retrofit Knee / Bed Mills w/o ATC |
80's? |
bridgeport |
series 1 |
Good |
sold |
Photo /
More Info. |
9 x 42" table: bridgeport mill w/ 2 axis proto-track cnc
control
manual or 2 axis cnc operation
vari speed head 50-4500rpm
9 x 42" table
2 hp spindle motor
proto trak unit #15020
3 axis dro
R-8 spindle |
|
Ad # 12438 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Tree |
J-350 CNC |
Good |
sold |
Photo /
More Info. |
3 Axis 10" x 52": Tree Quick Man 350
Dynapath Delta CNC
10" x 52"
3 Axis
Box Way
Cat 40 Spindle
220/3 Phase |
|
Ad # 7697 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1996? |
Southwestern |
TRAK DPM |
Very Good |
sold |
Photo /
More Info. |
10" x 50" 3-Axis CNC Bed Mill: Control: TRAK AGE 3 (3-axis)
Table: 10" x 50"
Spindle Size: CAT 40
Spindle Power: 3 hp
Spindle Speeds: 600 - 4,200 rpm
Variable Speed Head (manual)
Auto-Lube System
air draw bar
Coolant System |
|
Ad # 13344 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1984 |
Chevalier |
FM 3VK |
Good |
sold |
Photo /
More Info. |
10" x 50" 3 axis cnc/manual knee mill: Chevalier CNC
3 Axis cnc/manual knee mill
Anilam Series 1100 Control
Voltage 220
Table size:
10" x 50" (254 x 1270mm)
Longitudinal travel:
30" (760mm)
Cross travel:
15 3/8" (390mm)
Vertical travel (knee):
15" (380mm)
Vertical spindle motor:
2 HP
Floor space:
101 1/4" x 79" x 80 5/8"
Approximate weight:
3350 lbs |
|
Ad # 13347 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Acer |
Ultima |
Needs Work |
sold |
Photo /
More Info. |
10" x 50"-3 axis cnc/manual: Acer Ultima
Control Centroid Model 10
10" x 50" Table
Voltage 220/ 3 Phase
3 Axis CNC
80-4200 RPM
|
|
Ad # 13342 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
Prototrak |
Trak K3 |
Good |
sold |
Photo /
More Info. |
10" x 50"-2 axis cnc: Proto Trak
Trak K3
Control Trak A.G.E 2
Table Size-50" X 10"
Table Travel -32"
Saddle Travel-15.5"
Knee Travel:-16"
Ram Travel-24"
Maximum Quill Travel-5"
Quill Diameter-3 3/8"
Spindle Taper-R8
Spindle Speed Range -60-4200 RPM
Head Tilt-45° forward and back, 90° left and right
Spindle Motor- 3 HP |
|
Ad # 13343 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
Prototrak |
DPM |
Good |
sold |
Photo /
More Info. |
10" x 50": Prototrak DPM
Control Trak A.G.E. 3
quill dro scale
yr 1999
220 Voltage
3-Axis CNC
220/440-3Phase, 3 HP
10 x 50 inch Table
4200 Max RPM
CAT 40 Spindle
31" x 17" x 23.5" mfg spec travels |
|
Ad # 14061 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2006 |
atrump |
A one |
Excellent |
sold |
Photo /
More Info. |
3 Axis 10" 54": Atrump 3 axis CNC knee mill - w/Following
options
Centroid M400S controller
220V 1phase
wired for CNC 4th axis
power knee
power drawbar
auto lube/coolant/way covers/splash guard (not
shown)
work light
10"x54" table
Cat30 spindle
Compression tapping software
horizontal attachment
plust tooling and cart
This mill was purchased in 2006 but never used
as
the original owner passed away. Perfect setup
for
home shop or commercial use w/220v 1Ph setup.
The mill has been kept in an insulated shop at
all
times and kept well oiled, and can be seen
under
power by appointment.
|
|
Ad # 13339 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Fryer |
MB-8 |
Needs Work |
sold |
Photo /
More Info. |
10" x 50" table: Fryer Bed Mill
Model MB-8
Control Anilam 3300 MK
Cat 40 Spindle
10" x 50" table
Air Power Draw Bar
60-4200 RPM |
|
Ad # 14050 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1999 |
Supermax |
YCM-40 |
Good |
sold |
Photo /
More Info. |
3 Axis Centriod: Supermax YCM-40
Centroid Controller-3 Axis Centriod
Table-W:9 "
Table-L:42 "
Travel-Long:38 "
Travel-Cross:15.5 "
Power:5 hp
RPM:4200 rpm
|
|
Ad # 4865 | CNC & Retrofit Knee / Bed Mills w/o ATC |
? |
Ex-cell-o |
602 |
Good |
Sold |
Photo /
More Info. |
3 Axis CNC Knee Mill retrofit : 9" x 42" table
2HP motor
85-4,000 RPM variable speed head
NMTB 40 taper spindle W/ 7 holders, collet & end mill with collets for holder included
spray mist & flood coolant
3 Axis CNCC control: Artisan-AH,AH software version 3.1T- Std.PC drven-included
No manual hand wheels on machine, cnc/control only
G-code programming with suroutines, canned cycles & macros in software for common cutter paths
Dove tail ways in very good condition
auto-lube system
Vise shown not included
|
|
Ad # 2825 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1994 |
ANILAM EAGLE |
KM750 |
Good |
Sold |
No Photo /
More Info. |
Anilam Eagle 3-Axis CNC Knee Type Miller: Table-W: 12.6 "
Table-L: 48 "
# Axes: 3
Travel-Long: 27.5 "
Travel-Cross: 14 "
Power: 5--7.5 HP
Taper: 40 CAT
Control: Anilam 1400
|
|
Ad # 14012 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Acer |
Analam 1100M |
Good |
sold |
Photo /
More Info. |
2 Axis Analam 10" x 54": Acer 2 Axis CNC, Analam 1100M control
10x54 table, variable speed head
Maxi torque power draw bar
Everything in good working order |
|
Ad # 11227 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1983 |
Yeong Chin |
YC-60 |
Good |
sold |
Photo /
More Info. |
17" X 48" Table: 17" x 48" Table size
Table travels: 33" x 18"
Fanuc 6M control.
Manuel Tool Change |
|
Ad # 13996 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Supermax |
|
Good |
sold |
Photo /
More Info. |
3 axis 9" x 49": Supermax 3 Axis CNC Vertical Mill
• Table Size - 9" x 49"
• Travels X-Axis - 30"
• Travels Y-Axis - 15"
• Quill Travel - 5"
• Knee Travel - 15"
• Spindle Taper - #40
• Spindle Speeds(2) - 60-4200 RPM
• Spindle Motor - 3 HP
• Quill Diameter - 3.94"
• Approximate Machine Weight - 3,100 Lbs.
• Approximate Machine Floor Space - 73-1/8"FB
x
104"LR x 85"H |
|
Ad # 13991 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2008 |
Acer |
EVS-5VK-54 |
Excellent |
sold |
Photo /
More Info. |
10 x 54" table: 40 taper: Acer 5VK Knee Mill W/Acu-rite 3 axis millpower control
ULTRA HIGH QUALITY ACER E-MILL™ MILLING
MACHINE:
• 5 HP “Super E” Baldor Motor
• Infinite 60 ~ 4,500 RPM Speed AC Frequency Drive
• HRC 52° Hardened and Ground Table
• Turcite-B Coated Guideway
• Precision Spindle w/ ABEC-7 Bearings
• Meehanite Casting
• Automotive Paint
• Milling Head with Tilting Mechanism
• Rugged 10” x 54” Table Size
• 1” Diameter Ball Screws with Casted Mounting Brackets
• Hardened & Ground X, Y, & Z, Table Top and Bottom to
HRC 52°
• Dual Knee, Table, and Saddle Locks
• spindle Taper N.S.T. #40 Taper (5VK model)
• Class 7 Precision Spindle Bearings
• Precision 3-3/8” Diameter Hard Chromed Quill at HRC 62°
• Turcite-B Lining Saddle Ways to Reduce Metal Wear
• Auto-Lubrication
• Max. Load on Table is up to 900 lbs.
CONTROL SOFTWARE FEATURES:
- Abs/inc - Hole Patterns (bolt circle, array, frame, row)
- Tool Library - Repeat, Rotate, Mirror Image, Engraving
- Inch / Metric - Position / Drill
- Polar / Cartesian - Lines / Diagonals / Arcs
- Rectangle (pocket, frame, slot, face) - Blends (corner
radius)
- Circle (pocket, frame, ring) - Explode and much much
more…
- Custom Pockets
note:includes tooling shown, auto lube, air power draw bar,
remote pendant or machine mountable control,power knee
feed
Note: very good condition little use... |
|
Ad # 10277 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Alliant |
9 x 48 |
Good |
Sold |
Photo /
More Info. |
3 axis cnc knee mill retrofit: 3 axis cnc knee mill
manual quill handle
control: Anilam 1100 # A7010003
9 x 48 table
R-8 spindle
all manuals
air pwr draw bar |
|
Ad # 7621 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Bridgeport |
Series 1 - CNC |
Good |
sold |
Photo /
More Info. |
9" x 49" Bridgeport Mill With 2-Axis Prototrak CNC Control : Control: 2-Axes cnc ProtoTrak MX-3 # 15020/189
2 axis table movement with 3rd axis readout..
Table: 9" x 49"
Variable Speed Spindle
auto lube
VS head-2J
30 taper quill
some tooling includes
shaper head included
mist coolant
quill readout
|
|
Ad # 9318 | CNC & Retrofit Knee / Bed Mills w/o ATC |
Unknown |
Cincinnati |
5V1000 |
Good |
Sold |
Photo /
More Info. |
: 24"x41" Working Surface,
Axis Travel....20"y, 40"X, 8"Z
Spindle........ 300KWIK
Head Travel....12"
Control........Fagor 8020, With Hand Control
RPM............ 25-4500 Programable
H.P............ 5
RS232 Port, Coolant, |
|
Ad # 7614 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Kondia |
FV-1 Power Mill |
Very Good |
Sold |
Photo /
More Info. |
9" x 49" Kondia 3-Axis Mill with Centroid M-15 Control: Control: Centroid M-15, s/n 4197
Table Size: 9" x 49"
Spindle Power: 2 hp
Spindle Speeds: 60 - 500 rpm, 500 - 4,250 rpm
Speed Change: Variable Speed Head
Auto Central Lube System
Hand Held Control |
|
Ad # 13274 | CNC & Retrofit Knee / Bed Mills w/o ATC |
90's? |
Clausing Kondia |
FV-1 |
Good |
sold |
Photo /
More Info. |
2 axis 10" x 50" Proto Trak: Clausing Kondia FV-1 mill w/
Proto Trak MX 2 -2 axis cnc or manual control w conversational programming & graphics software
Machine can be run manually also
Air Draw Bar-Kurt
3 HP main motor
coolant mist unit
variable speed head
10" x 50" table
auto lube
spray mister
wired Voltage 220/3
2 Axis cnc or manual control
3 axis DRO -quill scale and X & Y
manuals included
Note: main control console was recently replaced with new unit
Machine runs good and is ready to go! |
|
Ad # 12054 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Dyna Myte |
2800c |
Good |
sold |
Photo /
More Info. |
: Dyna Myte 2800C
6" x 12" table
Dyna 2800C Control
Table Size 15 3/4" X 6 1/4"
Table Travel X-Axis 8"
Table Travel Y-Axis 6"
Vertical Head Travel 7"
Distance from spindle nose to table top 3.5" -
10.5"
Distance from spindle center to column 8.3"
Main Motor 1 1/4 HP
Spindle Taper ISO-30
Spindle Speed Range 0-10,000 RPM
Rapid traverse 100"/min
Cutting Feed Rate 60"/min
Max endmill capacity 1/2"
Weight 690 LBS
Voltage 110 Volts
|
|
Ad # 10191 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1996 |
Atrump |
K3VL-3 axis retrofit |
Good |
sold |
Photo /
More Info. |
3 axis CNC/manual Knee Mill: Control: Centroid M-15-5 S/N # 4110
3 axis CNC Knee Mill with manual/cnc Quill & hand wheels/cnc on table
VS head-3HP
ways look very good
Power knee feed
10 x 50 table
coolant chip pan on base
lube system
has manual quill & cnc controlled quill
manual/cnc table hand wheel feed
Spindle:# 30 taper NST(heavy duty)
X Travel: 31.5"
Y Travel: 15"
Z Travel: 4" Quill
Complete manuals and drawing w/ software demo for this macxhine
|
|
Ad # 13915 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2006 |
Atrump |
E422 |
Good |
sold |
Photo /
More Info. |
X travel 41.5", Y travel 22": CNC Vertical Mill Atrump E422 with DynaPath
Control Center.
Machine comes with:
Leveling pads & bolts
Tool kit
Work light
10 HP inverter drive motor
Full 3 axis Dynapath-delta 2000 CNC Control
with
graphic 12" color LCD
Coolant Pump
Cat 40 spindle
AC Axis servos
Table splash guard
Y&Z axis way covers
Automatic machine oiling
Several tools included for boring, decking,
sleeving, etc.
Table: 18" x 49"
220 Volt 3 phase
10HP Spindle
Y travel 22"
X travel 41.5"
Z travel 24"
manual 4th axis index table-roll over
fixture
very low hrs.
no tool changer |
|
Ad # 8254 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2004 |
Acer |
3VK |
Excellent |
Sold |
Photo /
More Info. |
10 x 50 table : Year: 2004
Make/Model: Acer 3 VK Mill with Acu-Rite 2-Axis Control with 3-Axis Digital Readout
Condition: Excellent
Wired 220 single phase, can run 3 phase also
Serial #: On request
Machine Location:
Concord, NC 28027
Price:
General Description:
Acer Model 3 VK Knee Mill Features:
Infinitely variable speed spindle
3 HP, Spindle Drive Motor (Baldor Super "E")
Speed Range, Variable 60-4500 RPM
Variable Speed Operation
Table-10" x 50" (Table surface ground and hardened to Rockwell 58-60C)
Saddle, Ram, Table and Knee have Double Locks for eliminating Lateral Rocking Motions
Hardened and Ground ways on Column and Knee
Chrome Plated Screws on X&Y Axis movement with Double
Nut designed Back Lash elimination
Automatic lubrication system
Turcite "B" Lining on saddle ways, X&Y Movement
Class 7 Precision Spindle bearings insuring run-out of no more than .00015"
Necessary wrenches and manuals
Chrome plated Precision Ground Quill and Housing
Meehanite Casting Porcess Annealed to eliminate internal stress
Options included: Kurt D688 vise, collet set, table clamp kit,Kurt Air Power Draw Bar
MILLPWR CNC 2-Axis Contorl with 3-Axis Digital Readout
Control is menu driven with a prompted format providing new operators a very short "learning curve"
10" flat panel, color LCD display
Absolute or incremental programming
Cutter Radius Compensation
Scale Factoring
Part programming storage of up to 999 blocks of information on over 1,000 programs
Canned routines make it easy to program complicated but regular features in a simple and fast way. Included canned routines:
Rectangular and circular pockets and frames
Irregular pockets
Hole patterns
Bolt circles
Lines and rectangular arrays
The blend function allows the operator simple entry of corner radius saving programming time
Additional milling functions (island, ellipse and chamfer)
Inch/metric conversion
Absolute Zero Protection
Linear Error Compensation
Self Diagnostics
Emergency Stop Button
Basic calculator functions
Geometric calculator
Precision glass scales with closed loop feedback and constant home reference point
Tool table
Remote stop/go button
RS232 Port and Immediate Graphics feedback during programming for visual verification
Teach mode allows operator to make a part manually while CNC control "remembers" for automatic machining of subsequent parts
Improved editing capabilities with cut, copy and paste functions
DXF file input via RS232 port or floppy diskette
Built in reference tables (drill and tap sizes)
Comments:
Machine is in like new condition, very low hours
|
|
Ad # 12039 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990s |
Bridgeport Proto trak |
|
Good |
sold |
Photo /
More Info. |
9" x 48" Proto Trak 2 axis: Bridgeport Proto Trak 2 axis
3 axis read out
9" x 48" table
4000 RPM head
|
|
Ad # 10176 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1995 |
Tree |
Journeyman 250 |
Good |
sold |
Photo /
More Info. |
3 axis cnc-10 x 38 table ;30 taper spindle: 3 axis cnc
table: 10 x 38"
30 taper
color touch screen
control: siemens PC-2100
ridged head & ram
coolant
|
|
Ad # 13864 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2004 |
Birmingham |
AC-2SVF-3/Accu-2 |
Excellent |
sold |
Photo /
More Info. |
3 axis cnc/manual knee mill: Birmingham # AC-2SVF-3 3 axis cnc /Accupath-manual Knee Mill
table size: 9" x 49"
control : centroid M400S S/.N # 20/82 110/1 voltage on control
Standard main Features:
High speed 3D contouring.
English, French, Spanish and Chinese language display.
M&G code programming or conversational
15" crystal-clear monitor.
Easy switch from CNC to manual.
PC based with floppy & RS232, LAN ready, mouse and keyboard.
32 bit digital signal procesor.
Heavy duty servo motors.
Turcite "B" coating on ways.
High grade casting.
High precision C3 class ground ballscrews with double nuts, pre-loaded, angular contact bearings.
Standard Features:
CNC Computer centroid 400S controlPC Based.
Upgradeable software.
3.5" Floppy Disk Drive.
Internal solid state hard drive.
15" Color LCD display.
LAN Ready, RS232, mouse, keyboard and parallel ports.
Digital fiber optics wired.
Main spindle: R-8 3HP 220/3 voltage
coolant pump: 220/3 voltage
air power draw bar
Auto lube
vise w/ swivel base
X travel: 30"
cross travel 12"
vertical knee travel: 16"
spindle speed: 50-5000RPM programmable
resolution/repeatability: 0.0001"
position: 0.0002"/12"
quill travel: 4-3/4" manual or cnc
Note:very low hrs-little use-very nice machine!
sells for almost 30K new! |
|
Ad # 2608 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2000 |
chevalier |
pro 3200 |
Excellent |
Sold |
Photo /
More Info. |
Chevalier 2 axis CNC vertical Mill: 2000 Chevalier 2 axis cnc verical mill,Anilam 3200 2 axis control, 3 hp. R-... |
|
Ad # 9236 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1989 |
Supermax |
YCM 40 |
Good |
sold |
Photo /
More Info. |
: SUPERMAX YCM-40 3-AXIS CNC MILLING MACHINE
WITH: DYNAPATH DELTA -20 CONTROL
MODEL: YCM-40
S/N 901172
SPECIFICATIONS
TABLE WORKING SURFACE: 9” X 49”
MAXIMUM LOAD CAPACITY: 550 LBS.
TRAVELS: LONGITUDINAL X-AXIS: 28”
CROSS Y-AXIS: 15 ½”
VERTICAL Z-AXIS: 5”
KNEE TRAVEL MANUAL: 16”
TABLE TO SPINDLE NOSE: 0 – 18.7”
TABLE CENTER TO COLUMN: 6 – 21 1/2”
QUILL DIAMETER: 3 3/8”
SPINDLE NOSE: NST #40
SPINDLE SPEED (INFINITELY VARIABLE): 60 – 4200
RPM
SPINDLE MOTOR: 3 HP AC
POWER – ELECTRICAL: 60 HZ, 3 PHASE, 208/230V
WEIGHT (WITHOUT CONTROLS): 2600 LBS.
FLOOR AREA: 73” X 104” X 82” H.
FEATURES:
O.E.M. DESIGNED CASTING FOR CNC, NOT
RETROFIT RIGID RAM
MEEHANITE CASTINGS
SQUARE GUIDWAYS
PRECISION GROUND WAYS (KNEE AND SADDLE)
TURCITE-B SLIDWAYS
21” WIDE SADDLE
CHROMED QUILL-HONED HEAD
GROUND TABLE W/COOLANT KEY WAYS
EQUIPMENT INCLUDED:
DYNAPATH DELTA -20 CONTROL
POWER DRAW BAR
POWER BRAKE CYLINDER
WAY CHIP COVERS (BELLOWS TYPE)
GROUND BALL LEAD SCREWS (X, Y & Z)
AUTOMATIC LUBRICATION ON SCREWS AND WAYS
|
|
Ad # 9237 | CNC & Retrofit Knee / Bed Mills w/o ATC |
|
Tree |
225 |
Very Good |
Sold |
Photo /
More Info. |
: USED TREE JOURNEYMAN 250 WITH DYNAPATH CONTROL
COMPLETE WITH:
Auto Lube
Coolant
Autocon 40 Control
Rigid Head
RS232 Port
Splash Guards
SPECIFICATIONS:
Table10" x 40"
Travel X & Y26” x 14”
HP3
Spindle 30 Taper Quick Change
Speeds70-600 rpm low/600-4200 rpm high
Spindle Nose to Table20”
Knee Travel16.5”
Quill Travel5”
Weight2,800 lbs.
Volt200/60/3
|
|
Ad # 14528 | CNC & Retrofit Knee / Bed Mills w/o ATC |
1990 |
Republic Lagun |
250 |
Fair |
sold |
Photo /
More Info. |
1990 Lagun 250 CNC Mill with travels of X24" Y14" and Z6": 1990 Republic Lagun 250 CNC Knee Mill Vertical
Table 10" x 44" T Slotted
Travels X=24", Y=14", Z=6"
Quill Size 4-3/8" Diameter x 14" Long
Tool Taper #40 NMTB
Motor 7-1/2 HP
Spindle Speed 4200 Maximum RPM
Lagunmatic 1000 Dynapath Delta 10 3
Axis
Simultaneous Micro Processor Control W
CRT
Conversational or G Code Programmable
w/RS232
Port
Power Draw Bar
Dynamic Motor Brake
Manual Speed Adjustment
Manual Knee Travel Adjustment
Note: X-Axis will not home - needs some
repairs.
|
|
Ad # 15422 | CNC & Retrofit Knee / Bed Mills w/o ATC |
200? |
CWT |
Pro 1058-M |
Good |
sold |
Photo /
More Info. |
Table 58" x 10": CNC 3 Axes Retrofit Knee Mill
Make: CWT
Model: PRO 1058-M
Capacity: 58" x 10"
Electrical: 220/3 phase
Acu-Rite Control and Readout
CWT’s “Pro-1058” machining center is a multi-
purpose machine that can do guide and seat
work
as well as resurfacing, line boring and
cylinder boring.
|
|
Ad # 8141 | CNC & Retrofit Knee / Bed Mills w/o ATC |
2005 |
Proto Trak |
Trak :DPMF2 |
Excellent |
Sold |
Photo /
More Info. |
3 axis CNC bed mill W/ manual hand wheels: Proto Trak Edge 3 Controller,
The entry level C.N.C. control with up to 4 axis D.R.O. display is able to do simple cycles like bolt hole circles, circular and rectangular pockets, even complex profiles.
This control offers a real leap forward in the productivity of a turret mill - one day no one will buy a conventional D.R.O. for a turret mill.
Hardware
Digital Servo Amplifiers.
Precision Ground Ball Screws.
Enclosures to lock out contamination.
7.4” LCD with adjustable contrast.
Floppy Disk Storage for part programs.
Software
Diameter Cutter Compensation – allows programming of the part rather than the center of the tool path.
Circular Interpolation – makes arcs and any size hole easy to do with standard tools.
Linear Interpolation – to machine lines at any angle.
Conrad – provides automatic corner radius programming with one data input.
Incremental and Absolute programming can even be mixed within an event.
Teach – to program manual position and mill moves.
Look – a single button press to view graphics during programming.
Maths Help – for calculating points and intersections simply with no need for a calculator.
Continue Mill to eliminate repetitive data inputs while programming.
Programming Canned Cycles
Position/Drill – single point.
Bolt Hole – series of points evenly spaced around a circle
Mill – straight line at any angle.
Arc – any portion of a circle.
Pocket – a rectangle or circle and all the material inside, includes finish cut.
EDGE Control Options
Off-line Programming for running the ProtoTRAK software on a PC.
Remote Stop/Go (RSG) switch.
Scale on quill or knee, or both interlinked.
9 x 49 Table size,
travels-Approx X+30",Y=18", Z=23" Travels, plus a 5" Quill Scale
Table Size - 49" x 9"
T-Slots (number x width x pitch) - 3 x 16mm x 63.5mm
Travel (X, Y, Z axis) - 32 x 16 x 27
Quill Diameter - 3 3/8"
Maximum Quill Travel - 5"
Spindle Taper - R8
Spindle Speed Range RPM - Varispeed drive - 70-4200
Spindle Speed Range with E Head Option - 40-600, 300-5000
Spindle Center to Column Face - 18"
Spindle Motor Power - vari-speed head - 3 HP
Spindle Motor Power - Optional E head - 3 HP
Power requirements, control - 110V; 1P; 8A
Power requirements, machine with vari-speed head - 220/440;3P; 8.5/4.25A
Power requirements, machine with Optional E head - 220V;3P; 11A
Maximum Weight of Workpiece - 1320 lbs.
Height of table from bottom of bed - 33"
Max spindle nose to table - 27"
Min height - 90"
Max height - 98"
Width of machine including table - 70"
Length with electric box door closed - 64"
Overall width incl full table traverse - 104"
Overall length with electrical door open - 72"
Footprint of Machine - 23 x 40"
Weight net / shipping lbs. - 3200 / 3500
Rapid traverse X, Y, Z - 150 IPM
Auto Lube Pump
Precision ground ballscrews in the table, saddle and ram
Chrome hardened and ground quill
Meehanite castings
Slide ways are Turcite coated
Wide way surfaces are hardened and ground
Drilling max capacity, Varispeed head- 1" dia
Milling max capacity, Varispeed head - 2 inch3/min
Tapping max capacity, Varispeed head - .75"
Drilling max capacity, Optional E head - 1"
Milling max capacity, Optional E head - 3 inch3/min
Tapping max capacity, Optional E head - 3 /4
|
|
Ad # 14980 | CNC & Retrofit Knee / Bed Mills w/o ATC |
200? |
Trax |
DPM |
Good |
sold |
Photo /
More Info. |
cnc/manual: Trak DPM Bed Mill-3 axis
cnc plus manual control
control: AGE 3 w/ graphics
10 x 50 table
cat 40 spindle
air draw bar
3/5 hp spindle
220/3 voltage
rigger fee add:$800.00 to load on flat bed
|
|
Ad # 15690 | CNC & Retrofit Knee / Bed Mills w/o ATC |
? |
Shizouka |
mill master ANS |
Good |
sold |
Photo /
More Info. |
11 x 50 table: Shizouka knee mill, 3 axis, CNC only (no manual
control)
Delta Tau advantage 600 control
model:ANS Mill Master
air draw bar
NMTB40 spindle
Vice NOT included
11 x 50 table
Micro mist lubrication unit
Lots of tool NMTB 40 HOLDERS (no cutters)
220/440 volt, wired 208/3 phase
3KW motor
Beautiful machine! |
|