| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 15675 | CNC Horizontal Boring Mills |
| — |
Cincinnati Gilbert |
5JT-7 |
Good |
sold |
Photo /
More Info. |
| —: Table Size (weight
Cap.) 60" x 144"
(60,000 lbs.)
X Axis Travel 132"
Y Axis Travel 84
W Axis Travel 56
Z Axis Travel 45
Spindle Quill
Diameter 5
Spindle Speed Range
15 - 1,500 rpm
Spindle Motor 30 hp.
Spindle Taper ISO-50
Floor Space (Approx)
(LxWxH) 474" x 288" x
225h
Machine Weight
(Approx) 120,000 lbs.
Equipped With:
48inch Rotary Table;
Table Guards; Steel
Way Covers;
Independent Servo
Drives;
Power Draw Bar; Ball
Screws; Manuals |
|
| Ad # 5440 | CNC Horizontal Boring Mills |
| — |
Portage |
— |
Good |
sold |
Photo /
More Info. |
| Portage 4" Horizontal Boring Mill: Portage 4" Horizontal Boring Mill; -not cnc
serial #20455R;
Spindle RPM 8-1000; Feeds .0013 to .255;
table 36 x 96; Travels x 72" V68" Z70"; 25 h.p. 220/440 volts 3phase; Good shape |
|
| Ad # 6723 | CNC Horizontal Boring Mills |
| 1987 |
Kuraki |
KBT-13DXA |
Excellent |
sold |
Photo /
More Info. |
| —: USED KURAKI KBT-13DXA CNC HORIZONTAL BORING & MILLING MACHINE
WITH 6 AXIS FANUC 11M CONTROL
NEW 1987
SPECIFICATIONS:
SPINDLE DIAMETER 5.12
SPINDLE TAPER ISO NO. 50
SPINDLE SPEEDS (3 STEP GEAR CHANGE) 5 - 1300 RPM
SPINDLE HEAD VERTICAL TRAVEL (Y) 78.74"
TABLE CROSS TRAVEL (X) 118.11"
COLUMN LONGITUDINAL TRAVEL (Z) 51.18"
SPINDLE CENTER TO TABLE SURFACE 0 - 78.74"
SPINDLE AXIAL TRAVEL (W) 27.56"
TABLE SIZE 62.99" x 70.87"
MAXIMUM LOADING WEIGHT 26400 LBS.
MAX. LOADING WEIGHT - 13DX-ANP 17600 LBS.
AUTOMATIC TABLE INDEXING 90 DEGREES
FEED RATE (X, Y, Z & W) 0.04 - 141.73 IPM
RAPID TRAVERSE (X, Y, & Z) 393.70 IPM
(W) 236.22 IPM
RAPID TABLE ROTARY SPEED 0.83 RPM
MAIN MOTOR AC 30 HP/30 MIN. RATING
FEED MOTOR (X & Z) AC 9.5 HP
(W, Y & B) 4.5 HP
TABLE ROTATION AC 3.7 HP
HYDRAULIC PUMP MOTOR AC 3 HP
SPINDLE LUBRICATION AC 0.13 HP
SLIDE WAYS LUBRICATION AC 0.08 HP
SPIRAL CHIP CONVEYOR AC 0.53 HP
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
SPECIFICATIONS CONTINUED:
ELECTRIC POWER SOURCE
VOLTAGE AC 200/220V +/- 10%
50/60 Hz +/- 1%
CAPACITY 65 KVA
WIRES 100mm 2 X 3 WIRES
FOR EARTH 22mm 2 X 1 WIRE
COMPRESSED AIR - PRESSURE OVER 5 kg/cm2
150 LITERS/MIN.
MACHINE HEIGHT 187.01"
FLOOR SPACE 263.78" x 263.78"
MACHINE WEIGHT (INCLUDING NC UNIT) 70,400 LBS.
AUTOMATIC TOOL CHANGER:
TOOL SHANK MAS BT50
PULL STUD MAS P50T-1
TOOL STORAGE CAPACITY 40 PIECES
MAXIMUM TOOL DIAMETER 4.92"
VACANT ADJACENT POTS 9.05"
MAXIMUM TOOL LENGTH 15.75"
MAXIMUM TOOL WEIGHT 55 LBS.
TOOL SELECTION RANDOM
EQUIPPED WITH:
COIL TYPE CHIP CONVEYOR
CHIP COVER FOR SLIDE WAY
SPINDLE SPEED METER & LOAD METER
MANUAL PULSE GENERATOR
WORK LIGHT
SIGNAL LIGHT
POWER SHUTOFF DEVICE
MANUAL SPINDLE SETTING DEVICE
MONOLEVER TYPE JOG FEED
SELF DIAGNOSIS FUNCTION
14" COLOR CRT
DOOR INTERLOCK ON EC BOX
COOLANT DEVICE B WITH LIFT CHIP CONVEYOR
DIGITAL READOUT FOR TABLE ROTATION
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
STANDARD SPECIFICATIONS FOR FANUC 11M CONTROL:
CONTROLLED AXES 4 AXES (X, Y, Z & W)
SIMULTANEOUS CONTROLLED AXES 4 AXES
TAPE CODE EIA/ISO AUTOMATIC
LEAST COMMANDED INCREMENT 0.0001"
MAX. PROGRAMMABLE DIMENSION +/- 9999.9999"
DECIMAL POINT INPUT
FEED RATE COMMAND DIRECT DESIGNATION
FEED RATE OVERRIDE 0 - 200% (EVERY 10%)
TANGENTIAL SPEED CONSTANT CONTROL
AUTOMATIC ACCELERATION/DECELERATION
POSITIONING
LINEAR INTERPOLATION
ABSOLUTE/INCREMENTAL PROGRAMMING - USE IN SAME BLOCK
MACHINE COORDINATES SYSTEM SELECTION - G53
LOCAL COORDINATE SYSTEM SETTING - G52
WORK COORDINATE SYSTEM CHANGE - G92
BUFFER REGISTER
DWELL
M CODE OUT PUT M 3 DIGITS
MDI & CRT 14" COLOR
TAPE STORAGE LENGTH 320 METERS.
BACK GROUND EDITING EDITING DURING AUTO. OPERATION
REGISTERABLE PROGRAMS 100
SELF DIAGNOSIS FUNCTIONS
BACKLASH COMPENSATION MAX. 9999 PULSES
SINGLE BLOCK
OPTIONAL BLOCK SKIP
MANUAL ABSOLUTE ON/OFF
MIRROR IMAGE
DRY RUN
INTERLOCK
MACHINE LOCK
Z AXIS MACHINE LOCK
FEED HOLD
MANUAL JOG FEED
EMERGENCY STOP
FOLLOW UP AT EMERGENCY STOP, SIGNAL INPUT
SEQUENCE NUMBER DISPLAY 5 DIGITS
SEQUENCE NUMBER SEARCH
PROGRAM NUMBER 4 DIGITS
PROGRAM NAME 16 CHARACTERS
PROGRAM NUMBER SEARCH
EXACT STOP/CUTTING MODE G09, G61, G63, G64
KURAKI KBT-13DX BORING & MILLING MACHINE CONTINUED
STANDARD SPECIFICATIONS FOR FANUC 11M CONTROL:
AUXILIARY FUNCTION LOCK
MULTI-QUADRANT CIRCULAR INTERPOLATION
RADIUS DESIGNATION ON ARC
CANNED CYCLE G73, G74, G76, G80-G89, G98, G99
CUTTER COMPENSATION C G40-G42
TOOL LENGTH COMPENSATION
TOOL OFFSET AMOUNT MEMORY C +/- 6 DIGITS, 200 PAIRS
REFERENCE POINT RETURN,
MANUAL/ABSOLUTE G27, G28, G29
2ND REFERENCE POINT RETURN
MANUAL PULSE GENERATOR
S CODE OUTPUT S-4 DIGITS
T CODE OUTPUT T-2 DIGITS
INCH/METRIC CONVERSION
PROGRAMMABLE DATA INPUT G10
STORED STROKE LIMIT I
STORED PITCH ERROR COMPENSATION
RAPID FEED OVERRIDE
PROGRAM RESTART
EXTERNAL DATA INPUT/OUTPUT TOOL OFFSET AMOUNT
MACHINE COORDINATE SYSTEM
SHIFT AMOUNT
ALARM MESSAGE
OPERATOR MESSAGE
PROGRAM NUMBER SEARCH
SEQUENCE NUMBER SEARCH
INPUT/OUTPUT INTERFACE RS 232C OR 20mA CURRENT LOOP
RUN HOUR DISPLAY
SPINDLE ORIENTATION
CUSTOM MACRO
SKIP FUNCTION
SINGLE DIRECTION POSITIONING
CORNER R
F1 DIGIT FEED
PROGRAMMABLE MIRROR IMAGE
AUTOMATIC CORNER OVERRIDE
COORDINATE SYSTEM ROTATION
6TH AXIS INTERFACE FOR KNIGHT CNC ROTARY TABLE
ALSO INCLUDING KNIGHT 30 CNC ROTARY TABLE WITH 72 MAXIMUM PART DIAMETER SWING
TERMS:PAYMENT IN FULL PRIOR TO SHIPMENT
PRICE: UNDER POWER IN LOCAL PLANT $385,000.00 net
|
|
| Ad # 10694 | CNC Horizontal Boring Mills |
| 2007 |
Tos Varnsdorf |
WHN13 |
Very Good |
Sold |
Photo /
More Info. |
| 5.118" spindle; travels: 98"Y, 49Z ,137 X: TOS VARNSDORF WHN13/HORIZONTAL BORING MILL
480/3 voltage
all manuals
no tool changer
>Spindle diameter 130mm (5.118")
>Increased vertical travel "Y" to 2500mm (98.42")
>Longitudinal travel "Z" to 120mm (49.21")
>Increased cross "X" travel to 3500mm (137.79")
>Rotary table S12 with table load 10,000kg (26,448 lb)
>Increased table size 1800 x 2250mm (70.86 x 86.61")
>CHOV 13 - 20 Bar through spindle coolant
>Compressor coolant system
>Compensation of spindle temperature expansion
>Standard chip conveyor for coordinate x=3500mm
>Heidenhain iTNC 530 controller -conversational or g code programming
432 run time hrs as of 9-2010
thru spindle coolant
CAT 50 taper spindle
chip conveyor
4th axis indexing table
foundation: 4-5ft of concrete slab
pit required-w 5ft of concrete under machine
coolant 300PSI w/ paper filter system
will take 3 trucks to move -will need dissasembled-buyer to pay all dissassemble/rigging and freight -rigging fee to load $7500.00 |
|
| Ad # 14288 | CNC Horizontal Boring Mills |
| — |
Giddings & Lewis |
PMC-50 |
Needs Work |
sold |
Photo /
More Info. |
| travels: x-7' x y-6' x z-7ft: Gidding & Lewis CNC Horizontal boring mill
spindle: 5" dia
spindle taper: 50
travels: x-7' x y-6' x z-7ft
table size: 6ft x 4ft
note: was retrofitted with Heidenheim
control and used very little in many years will
need some tlc to get up and running again. |
|
| Ad # 9552 | CNC Horizontal Boring Mills |
| 1971 |
Devlieg Jig Mill |
4k-72 CNC |
Good |
Sold |
Photo /
More Info. |
| —: (1971)
Devlieg CNC Jig Mill
model# 4K-72
Table:72" x 40"
travels: X=68"
Y=44.5"
Z=20"
W=15-3/4"
Control: Fanuc GN6 (5-axis CNC control)
Rebuilt and retrofitted in (1982)
|
|
| Ad # 6180 | CNC Horizontal Boring Mills |
| 1987 |
WOTAN |
RAPID O/C1.5 |
Good |
sold |
Photo /
More Info. |
| 4.33" -4 AXIS CNC HORIZONTAL TABLE TYPE BORING MILL: 4.33" 4 AXIS CNC HORIZONTAL TABLE TYPE BORING MILL
FEATURING: 40 POSITION AUTOMATIC TOOL CHANGER, 4 AXIS
SPINDLE DIAMETER -------------------------- 4.33"
ROTARY TABLE SIZE ------------------------- 31.5" X 31.5"
TABLE CROSS TRAVEL --------- ( X AXIS ) --- 49.2"
HEADSTOCK VERTICAL TRAVEL -- ( Y AXIS ) --- 40.2"
COLUMN LONGITUDINAL TRAVEL - ( Z AXIS ) --- 32.2"
TABLE LOAD CAPACITY ----------------------- 3,300 LBS.
SPINDLE TAPER ----------------------------- ASA #50
SPINDLE SPEEDS, 3 GEARED RANGES, VARIABLE - 1 TO 3200 RPM
TOOL CHANGER POSITIONS -------------------- 40
RAPID TRAVERSE -------------- ( X, Y, Z ) - 400 IPM
RAPID TRAVERSE -------------- ( B ) ------- 3 RPM
SPINDLE DRIVE ----------------------------- 40 HP D.C.
EQUIPPED WITH ---
G.E. 2000 CNC CONTROL
GETTYS SERVO DRIVES
COOLANT SYSTEM
KENNAMETER #UC2 FACING & BORING HEAD
WAY COVERS |
|
| Ad # 14123 | CNC Horizontal Boring Mills |
| 1995 |
Juaristi |
TS1 |
Good |
SOLD |
Photo /
More Info. |
| —: (1995)
Juaristi Boring Mill
Travels; X=157.48", Y=78.74", Z=78.74", W=23.62"
Spindle: Diam 4.92"
Internal Taper: ISO 50
Hollow spindle Shaft Nose: ISO 60
Speed Range: (2 Ranges) rpm 12 -2300, 12 - 570
Low Range: rpm 12 -2300, 12 - 570
High Range: rpm 570 - 2300
Rotation at Constant Torque: rpm 12 - 214
Rotation At Constant Power: rpm 214 - 2300
Table Surface 47.24" x 59.06"
Rotation Speed At Work: rpm 0./.1,5
Rapid Rotation Speed: rpm 5
60 ATC
Max Weight Allowed: 5000 kg
Work Feeds: X, Y, Z, W = 76.20 ipm
Rapid Feeds: X, Y, Z, W = 393.70 ipm
Heidenhein Control
|
|
| Ad # 12339 | CNC Horizontal Boring Mills |
| 1971 |
Sandstrand |
Omnimill OM2-119 |
Good |
sold |
Photo /
More Info. |
| 44" x 92" Table: Sandstrand OmniMill
Sandstrand Numerical Control 705A
40 Tool Changer
44" x 92" Table 6ft z travel?
220/3 Phase |
|
| Ad # 1867 | CNC Horizontal Boring Mills |
| 1941 |
Cincinnati Gilbert |
3.5 TF Floor Type |
Fair |
sold |
No Photo /
More Info. |
| HBM: Has new Accurite Readouts X=48 Y=61" |
|
| Ad # 10288 | CNC Horizontal Boring Mills |
| 1986 |
Wotan |
HBM |
Good |
Sold |
Photo /
More Info. |
| travels: 70x , 49y, 57z.quill 24": travels: 70" X, 49"Y, 57"Z, 24" quill
cat 50 spindle
MDSI retrofited control software version: Open CNC 6.0
rotary table
programmable B axis
hardended ways
ballscrews on all axis
can do simultaneous milling, circle interpolation,
programmable speeds & feeds of table and spindle
gettys drives
power draw bar |
|
| Ad # 13910 | CNC Horizontal Boring Mills |
| 85-07 |
UNION |
BPF-130 |
Excellent |
sold |
Photo /
More Info. |
| 5.12" spindle, 24' cross, 100" vertical: Reconditioned & retrofitted in 2006-7, many updates
including new PLC interface, Heindenhain TCN-310 cnc
control, floor plates, angle head, facing head, 80"
x 70" powered rotary table....priced to sell fast!
Still under power...serious buyers only! |
|
| Ad # 5803 | CNC Horizontal Boring Mills |
| 1986 |
Nomura |
BN-130WR |
Very Good |
SOLD |
Photo /
More Info. |
| 5" Nomura BN-130WR CNC Horizontal Boring Mill: 5" Spindle (130 mm)
Spindle Speed: 1,500 rpm
Travels:
X: 2,400 mm (94.5")
Y: 500 mm (19.68")
Z: 2,100 mm (82.67")
Table Size: 1,800 x 2,000 mm (70.8" x 78.75")
Control: Fanuc 10M |
|
| Ad # 15084 | CNC Horizontal Boring Mills |
| 1986 |
Toshiba |
BTD-11B |
Good |
sold |
Photo /
More Info. |
| travels: 79.5" x 59" x 55": CNC Toshiba Horizontal Boring Mill #BTD-11B
Control:Fidia # C1
Spindle: Cat 50 taper: 1600 RPM max
3 axis plus rotary indexer controller
table weight capacity: 13,800lbs
table :table 63" x 55"
Std. Mfg specs below-please verify
actual
machine
CAPACITY:
Spindle Diameter :4.33"
Taper In Spindle :#50
Vertical Head Travel, Y-Axis :59.05"
Table Cross Travel, X-Axis :78.74"
Spindle Travel, Z-Axis :24.8"
Saddle Travel: W-Axis :51.2"
Spindle Speeds :5-1600 RPM
http://www.prestigeequipment.com/email-
template/spacer.gif
Built In Rotary Table
55" x 63"
http://www.prestigeequipment.com/email-
template/spacer.gif
Table Indexing
4 x 90 Degrees
http://www.prestigeequipment.com/email-
template/spacer.gif
Table Load Capacity
13,860 LBS
EQUIPPED WITH:
Built-In Rotary Table
Ball Screws And Independent DC Servo
Drives
Way Covers
Hardened Ways
20/15 HP Spindle Drive Motor
440/220/3/60
Manual Pulse Generator
Note: machine has been disassembled
for
transport -ready to load up using local
rigger est
cost to load $ 2500.00
|
|
| Ad # 15085 | CNC Horizontal Boring Mills |
| 2006 |
Machining systems |
HMC200 |
Good |
sold |
Photo /
More Info. |
| —: 2006 Machining systems # HMC200
The machine has a total of (4) 1000mm (39x
39) pallets and a 3 pallet changer and is its
capable of handling up to 10,000 Lb. parts.
The machine also comes with the crane
pictured, custom enclosures & the platforms.
std machine specs below please verify actual
machine
General Specifications for a 2006 M.S.
Machining HMC-200
TRAVEL:
X Axis 78 [1981mm]
Y Axis 58" [1473.2mm]
Z Axis 58" [1473.2mm]
B Axis 360 degree
SPINDLE:
Power MTD 30hp
Speed 0-3000 RPM
Taper CV 50
INDEX TABLE:
1 degree
39" x 39" [990.6mm x 990.6mm] table top
10,000 Lbs [4536KG] Table load capacity
TOOLS:
35 tool storage standard.
50Lbs [22.7kG] capacity
Max diameter 10" [254mm] with adjacent pocket
empty
PALLET CHANGER
4 stations - pallets
39" x 39" [990.6mm x 990.6mm]
GENERAL:
Weight 65,000 Lbs.
Footprint 25.5' x 27.8' [7.8m x 8.5m]
|
|
| Ad # 14553 | CNC Horizontal Boring Mills |
| 1994 |
Sharmann |
6" |
Good |
sold |
Photo /
More Info. |
| 6", X- 236, Y-79", Z-59", W-28": Horizontal boring mill
Manufacturer; Scharmann CNC Floor Type Boring
Mill
Year of Manufacture; 1994
Retro fit; 2011
X- Travel; 236
Y-Travel; 79
Z-travel; 59
W-Travel; 28
Spindle Diameter; 6
Taper; Cat 50
Spindle Speed; 1500rpm
Equipped With:
Heidenhain 530I Controller
80Hp Spindle Motor
Floor plates and Rotary table not included.
|
|
| Ad # 4467 | CNC Horizontal Boring Mills |
| 1980*** |
Giddings & Lewis |
Model 65H6T |
Very Good |
Sold |
Photo /
More Info. |
| —: Built in 1980 - retrofitted in 2000S
Specifications
Table 60" X 132
Spindle 6
Travels
X 120"
Y 84"
Z 60"
W (quill) 48"
End Support 80
Spindle 6"
RPM 1020 3 range
HP 40
Equipped With
Fagor 8055 Control
Outboard support
Tailstock
Scales on X, Y and Z
Machine currently underpower.
Height is approx. 14'-6" from floor to the motor & pendant arm on top.
|
|
| Ad # 2446 | CNC Horizontal Boring Mills |
| 1968 |
GIDDINGS & LEWIS |
70H6T RETROFITTED: 1989 |
Very Good |
Sold |
Photo /
More Info. |
| 6" GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING MILL: 72" x 144" Tbl, X=132", Y=84", Z=36", 80,000 lb. Cap., 4" Ballscrews, Fanuc... |
|
| Ad # 2445 | CNC Horizontal Boring Mills |
| 1968 |
GIDDINGS & LEWIS |
70-H5-T RETROFITTED IN 1993 |
Very Good |
SOLD |
Photo /
More Info. |
| 5" GIDDINGS & LEWIS 3-AXIS TABLE TYPE BORING MILL: 48" x 120" Tbl, 108" CT, 60" VT, 40HP, Rebuilt & Retrofit 1993, 60,000 lb. ... |
|
| Ad # 13134 | CNC Horizontal Boring Mills |
| 1975 |
Cincinatti |
25HC-1800NC |
Good |
Sold |
Photo /
More Info. |
| 4"spindle: travels: X=96",Y=60", Z=52": 1975 Cincinatti # 25HC :cnc Horizontal boring mill w tool changer
travels: X=96",Y=60", Z=52"
Rebuilt by King completly in 1996 spent $360,000
The Cincinnati Milacron CIM -Xchanger 25HC-1800NC Hporizontal machining center is a general purpose Machine tool, of three slide axis with rotatary index table and tool changer capability integrated with a fanuc control system.
Machine can automaticaly change tools for milling, drilling, tapping, boring, reaming purposes.
Machine consists of a fix base with column, carrier and table unit. The column is mounted on top of the base unit and moves horizontally toward and away from the table. The carrier mounted on the front of the column moves vertically. The sliding table mounted on the base moves longitudanllyand carries the rotary table.
Specs:
4" spindle nose
travels: x-96", y-60" ,Z=52"travel
50 taper spindle -Cincinnati 50 taper double flange- not cat
Spindle motor: 25HP
spindle speeds: 20-3000 RPM
rotarty table positioner: 4ft x 4ft , 5 deg increments, max load 10,000 to 5" from centerline of table
table size: 108" x 48" overall
control: fanuc 15M
tool changer 30 positions, max tool length 19", 80lbs max...cycle time 8 sec tool to tool...metal to metal 12 sec
RS 232 port
feed rates: X,y,Z=0.2-150IPM
Acuracy: +- 0.0005 when new
no thru spindle coolant
no pit required
floor space: 19.3 x 18.2 x 12.7
under power rerady to Demo!
includes several tool holders approx 40pcs
note: machine can not be moved until replacement arrrives but can be reserved..approx: july 2013 |
|
| Ad # 13073 | CNC Horizontal Boring Mills |
| 2004 |
Waldrich Siegen |
PF F 150 (1) 530/400 |
Excellent |
sold |
Photo /
More Info. |
| X= 12.000 mm Y=5.300 mm Z=4.000 mm 250 ton load : MerkWaldrich Siegen
TypePF F 150 (1) 530 / 400
Jaar2004
Siemens 840 D in 6 Axis
Tafellengte (mm)12.000
Tafel breedte (mm) 4.770
Langs X (mm)12.000
Dwars Y (mm) 5.300
Vertikaal Z (mm) 4.000
250 Ton load
Pinole 560 mm / 100 KW / iso 60
CNC Milling heads KUMA
* Hydrostatic * Coolant true spindle * Feed 10.000
mm/min ! * Weight 450 ton * Power 400 V - 600
Kva * Double chipo conveyor * |
|
