Year |
Make |
Model |
Condition |
Price |
Details |
|
Ad # 11801 | Miscellaneous / Special Lathes |
1972 |
TOS |
WH 80 |
Good |
sold |
Photo /
More Info. |
Horizontal boring mill-HBM: Diameter of spindle 3.15"
Diameter if milling quill 7.09"
Taper in spindle No. 5 M.T.
Rapid traverse rate 63 IPM
Table dimensions 39.4" x 42"
Max. table load 6,160 lbs.
26 Rotary table feeds .002 to .512 IPR
Feed rate 0.001-0.315 IPR |
|
Ad # 6887 | Miscellaneous / Special Lathes |
1983 |
WARNER & SWASEY |
#1SC12 |
Good |
sold |
Photo /
More Info. |
WARNER & SWASEY MODEL #1SC12 AUTOMATIC CHUCKER(M-5020): WARNER & SWASEY MODEL #1SC12 AUTOMATIC CHUCKER(M-5020)
CHUCK DIAMETER (3-JAW HYDRAULIC) .............. 10´´ DIAMETER
TURRET STATIONS ............................... 12
BAR CAPACITY .................................. 2-1/4´´ DIAMETER
MAXIMUM SWING DIAMETER (OVER TURRET BAR) ...... 21-1/4´´
MAXIMUM SWING DIAMETER (OVER TURRET FACE) ..... 12-1/2´´
LONGITUDINAL WORK AREA ........................ 20-7/8´´
LONGITUDINAL STROKE ........................... 8-7/8´´
CROSS STROKE .................................. 6-1/4´´
SPINDLE SPEEDS (EVEN RANGE) ................... 55 TO 2558 RPM
SPINDLE NOSE .................................. 8´´ A-1
THRU HOLE IN SPINDLE .......................... 2-13/16´´
ALLEN-BRADLEY 7300 CONTROL
CHIP CONVEYOR
30 HORSEPOWER MOTOR
HYDRAULIC UNIT
COOLANT PUMP & MOTOR |
|
Ad # 11653 | Miscellaneous / Special Lathes |
|
Weiler |
10" |
Very Good |
sold |
Photo /
More Info. |
speed lathe: Weiler
speed lathe
10" swing
8" 3 jaw chuck
chuck guard
2-1/4" spindle bore
speeds -step pulley belt changeable: 125,185, 250,510,710,1000,355,500,710,1400,2000,2800 RPM |
|
Ad # 13580 | Miscellaneous / Special Lathes |
|
Levin |
ABHE |
Excellent |
sold |
Photo /
More Info. |
4" Swing: Levin Miniature / Micro-Miniature Precision
Watchmaker's Lathe
Country of Manufacture: Switzerland
Frame: Type ABHE, Serial No.: C05038
6-Position Turret Tailstock Assembly, Type
ABIA, Serial
No.: J01221
Swing: 3.94"
Compound Cross-Slide attachment (see pictures)
Tailstock attachment with drill chuck (see
pictures)
Precision drilling attachment (see pictures)
Tooling: 3-Jaw Chuck, 4-Jaw Chuck, collets,
collet
chuck, drill chuck, cutting insert holders,
miscellaneous
(see pictures)
Manuals available with purchase.
Features and Tooling:
- Machine is set up with the deep hole
drilling device
which the tail stock spindle is driven through
an
over arm belt system.
- Production turret and a standard tailstock.
- The taper turning compound and a standard
compound is on the table along with a steady
rest.
- Type D and the WW Collets
- 1/4 inch hex
- 3 Jaw Scroll Chuck
- Turret Attachment
Excellent condition (see pictures, more
pictures
available upon request)
This machine is available for inspection.
Quoted fob; Buyer responsible for freight and
logistics.
Buyer to verify all specifications and options
of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 13515 | Miscellaneous / Special Lathes |
1995 |
ENCO |
|
Excellent |
sold |
Photo /
More Info. |
ENCO Mill & Lathe Combination : ENCO Mill & Lathe Combination.
Excellent condition.
With tooling package.
110 volt
Condition excellent
$600 worth of tooling goes with it
|
|
Ad # 13514 | Miscellaneous / Special Lathes |
|
Enco |
109-1005 |
Excellent |
sold |
Photo /
More Info. |
Enco Mill/Lathe Combo Model 109-1005 :
Enco mill lathe combo 109-1005
Runs perfect
Mlls and some lathe bits included
110v
Model number 109-1005
|
|
Ad # 15316 | Miscellaneous / Special Lathes |
|
Hardinge |
DSM-A Turret Lathe |
Good |
sold |
Photo /
More Info. |
2-3/8" Turret Work Stroke: Automatic Turret Lathe
Manufacturer: Hardinge
Model: DSM-A
Electrics: 460 Volt/3 Phase/60 Cycle
Spindle Motor: 4.1 HP
Spindle Speeds: 12, Ranging from 250 - 4200
RPM
Spindle Capacity: 1-1/16" with 5C Collets
Full Load Amps: Machine - 9.2 / Spindle Motor
&
Hydraulic Pump - 3.6
5C Collet Spindle (see attached brochure for
tooling
specifications)
Hydraulic Tank: 5 US Gallons
Turret Work Stroke: 2-3/8"
Wt: 2800 lbs (approximate)
Dimensions: 81" long x 40" wide x 67" tall
(approximate)
On-Line Link to DSM-A Brochure w/
Specifications,
Capacities, etc:
http://www.sterlingmachinery.com/db-
files/hardinge%20bar%20&%20second%20operation
%20automatic%20dsm-a%20brochure.pdf
Buyer responsible for freight logistics and
expenses.
Seller agrees to load equipment on Buyer's
truck.
Equipment is NOT under power; available for
inspection.
Buyer to verify all specifications and
options of
equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed
or
implied, of the year, model, hour reading,
guarantee of
merchantability or fitness of the equipment;
the goods
are sold in an "As Is, Where Is" condition.
The seller warrants that the goods are free
and clear of
all liens, indebtedness, or liabilities.
SUBJECT TO PRIOR SALE. |
|
Ad # 13443 | Miscellaneous / Special Lathes |
? |
Smithy |
CB1239 |
Excellent |
sold |
Photo /
More Info. |
•Smithy Model CB1239: •Smithy Model CB1239
Lathe Turning |
Milling |
Drilling |
In good working condition with all tooling, used in home shop.
•Under power
•110 volt
•Can help load
|
|
Ad # 13441 | Miscellaneous / Special Lathes |
2005 |
Grizzly |
G4015Z |
Excellent |
sold |
Photo /
More Info. |
Grizzly G4015Z Lathe/Mill with extra tools : MODEL G4015Z COMBO LATHE/MILL
Product Dimensions:
Weight..................440 lbs.
Width (side-to-side) x Depth (front-to-back) x Height.. 42 x 23 x 35 in.
Weight...... 475 lbs.
Length x Width x Height... 23 x 41 x 39 in.
Electrical:
Power Requirement... 110V, Single-Phase, 60 Hz
Prewired Voltage.... 110V
Full-Load Current Rating..... 8.7A
Minimum Circuit Size....... 15A
Connection Type.......... Cord & Plug
Power Cord Included......... Yes
Power Cord Length.... 6 ft.
Power Cord Gauge..... 16 AWG
Plug Included......... Yes
Switch Type....... Push Button, Reversing
Motors:
Main
Type..... TEFC Capacitor-Start Induction
Horsepower.... 3/4 HP
Phase..... Single-Phase
Amps..... 8.7A
Speed... 1710 RPM
Power Transfer ... Belt Drive
Bearings..... Shielded & Permanently Lubricated |
|
Ad # 15282 | Miscellaneous / Special Lathes |
|
LANSING |
|
Fair |
sold |
Photo /
More Info. |
: 32" FACEPLATE
NO TAIL STOCK |
|
Ad # 10459 | Miscellaneous / Special Lathes |
1998 |
Gildemeister |
CTX 500 |
Good |
sold |
Photo /
More Info. |
Gildemeister Model CTX 500 - Dia 10": Gildemeister CTX #500
Turning Center - CNC
NEW: 1998 S/N #
WORKING RANGE - HEIDENHAIN Pilot 3190 CNC Control
12 station driven turrets 7.5kw
Swing above cover 26.76"
Maximum Turning Diameter 17.9"
Chuck Diameter 9.84"/12.34"
Maximum Transfer Diameter 10" 6"
Maximum Spacing between Spindles 55"
Spindle Speeds 18-3600 rpm
Turning Length 39.36"
Burener Coolant system and Chip Converyor
IFS #IFM-1000 Mist Collector
|
|
Ad # 10459 | Miscellaneous / Special Lathes |
1998 |
Gildemeister |
CTX 500 |
Good |
sold |
Photo /
More Info. |
Gildemeister Model CTX 500 - Dia 10": Gildemeister CTX #500
Turning Center - CNC
NEW: 1998 S/N #
WORKING RANGE - HEIDENHAIN Pilot 3190 CNC Control
12 station driven turrets 7.5kw
Swing above cover 26.76"
Maximum Turning Diameter 17.9"
Chuck Diameter 9.84"/12.34"
Maximum Transfer Diameter 10" 6"
Maximum Spacing between Spindles 55"
Spindle Speeds 18-3600 rpm
Turning Length 39.36"
Burener Coolant system and Chip Converyor
IFS #IFM-1000 Mist Collector
|
|
Ad # 2986 | Miscellaneous / Special Lathes |
1952 |
Lodge & Shipley |
60", Type A-1 |
|
Sold |
Photo /
More Info. |
Lodge & Shipley Model 60" T-Lathe, Type A-1: Maximum Swing in Gap 60"
Maximum Distance - Face of Spindle to Carriage 20-7/16"
Spindle Hole 11-1/2"
Spindle Speeds (24) 4 - 225 RPM
Spindle Nose A1-20
Feed Ranges (55) 0.001 - 0.65 IPR
Carriage Travel - Left of Center 30"
Carriage Travel, Right of Center 16.25"
Cross Slide Travel 16"
|
|
Ad # 5967 | Miscellaneous / Special Lathes |
1953 |
LODGE & SHIPLEY |
D-2 Carriage |
Good |
Sold |
Photo /
More Info. |
60” LODGE & SHIPLEY Hollow Spindle Right Angle T-Lathe, Model# D-2 car: 60” LODGE & SHIPLEY Hollow Spindle Right Angle T-Lathe, Model# D-2 carriage... |
|
Ad # 10234 | Miscellaneous / Special Lathes |
|
sherline |
1000 |
Excellent |
Sold |
Photo /
More Info. |
: Sherrline 1000 Miniature Lathe
Great or making small precision parts such as; Gun parts, Clock parts, Model parts, Home hobbies, Ect.
|
|
Ad # 13799 | Miscellaneous / Special Lathes |
1992 |
Enco |
110-2075 |
Excellent |
sold |
Photo /
More Info. |
12X36: I bought this lathe new. Has been in storage for
several years. Works
perfect complete with all attachments. |
|
Ad # 2318 | Miscellaneous / Special Lathes |
mid 60's |
Cincinnatti |
Double Head 20" |
Fair |
sold |
No Photo /
More Info. |
Double Head Pulley Crowning Machine: 20" Dia pulley capacity
Does flat or crown
5 HP
Double Head |
|