| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 7078 | Turning Center 4 - 10 in. chuck |
| 1992 |
NAKAMURA |
TMC-15 |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1992 NAKAMURA TMC-15: One (1) 1992 NAKAMURA TMC-15
Fanuc 0
Swing 15.75"
Turning Diameter 9.25"
Chuck Size 6"
Bar Capacity 1.5"
Spindle Speed 6000 rpm
Horsepower 10
Turret Stations 8
Square Size for Tool 3/4"
Tailstock None
X-Travel 5.31"
Z-Travel 13.39"
Grindley Barfeeder |
|
| Ad # 7080 | Turning Center 4 - 10 in. chuck |
| 1992 |
NAKAMURA |
TMC-15 |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1992 NAKAMURA TMC-15: One (1) 1992 NAKAMURA TMC-15
Fanuc 0
Swing 15.75"
Turning Diameter 9.25"
Chuck Size 6"
Bar Capacity 1.5"
Spindle Speed 6000 rpm
Horsepower 10
Turret Stations 8
Square Size for Tool 3/4"
Tailstock None
X-Travel 5.31"
Z-Travel 13.39"
Grindley Barfeeder |
|
| Ad # 7062 | Turning Center 4 - 10 in. chuck |
| 1998 |
Hitachi-Seiki |
HT23J |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1998 Hitachi-Seiki HT23J: One (1) 1998 Hitachi-Seiki HT23J
Max Turning Dia 13.30"
Max Turning Length 24.80"
Max Swing 17.70"
Kitagawa Hydraulic Chuck 10"
Max Bar Capacity 2.75"
HeadstockA2-8 Spindle Nose
3.000" Bore
20-4000 RPM
20 HP
Tailstock#5MT Quill Center
20.500" Body Travel Standard
Turret10 Position
Axis TravelX-8.200"
Z-24.80"
1181 IPM Traverse Rate
Equipped With:
Siecos J CNC Control
Tool Eye
Chip Conveyor |
|
| Ad # 7051 | Turning Center 4 - 10 in. chuck |
| 1985 |
Dianichi |
MG-63 |
Good |
Sold |
Photo /
More Info. |
| One (1) 1985 Dianichi MG-63: One (1) 1985 Dianichi MG-63
Swing Over Bed 24.822"
Swing Over Carriage 13.79"
Bed Width 18.912"
Formation of Main Spindle Edge JIS A1-11
Diameter of Front Bearing For Main Spindle 5.516"
Diameter of Main Spindle Through Hole 3.349"
Diameter of Main Spindle Tapered Hole (1/10 metric taper) No 100
Diameter of Tailstock Spindle 3.546"
Size of Center MT # 5
Width of Crossslide 11.032"
Tool Rest Type Automatic Square Tool Rest
Size to Tool 0.985" x 0.985"
Max Movable Distance of X Axis 12.608"
Max Movable Distance of Tailstock Spindle 5.91"
10" Chuck |
|
| Ad # 7050 | Turning Center 4 - 10 in. chuck |
| 1999 |
Dianichi |
F-25 |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1999 Dianichi F-25: One (1) 1999 Dianichi F-25
Swing Over Bed 19.6"
Center Distance 24.4"
X Axis Travel 6.89"
Z Axis Travel 26.4"
Spindle Speed 35-3500 RPM
Turret 10 Station
Spindle Nose A2-8
Spindle Bore 3.1"
Bar Capacity 2.5"
Motor HP 20 HP
10" 3 JAwHydraulic Chuck
Equipped With 10" 3 Jaw Hydraulic Chuck
Chip Conveyor
14" Color CRT on Control |
|
| Ad # 7052 | Turning Center 4 - 10 in. chuck |
| 1996 |
Haas |
HL-3 |
Very Good |
Sold |
Photo /
More Info. |
| 1996 Haas HL-3 Turning Center: 1996 Haas HL-3
2.5 Bore
30 HP
24” Swing
10” Chuck
3500 RPM
700 Rapids
12 Station Turret
39” Centers
Max Cut Dia 14 |
|
| Ad # 7049 | Turning Center 4 - 10 in. chuck |
| 1987 |
DAEWOO |
Puma 6 |
Good |
Sold |
Photo /
More Info. |
| One (1) 1987 DAEWOO Puma 6: One (1) 1987 DAEWOO Puma 6
Swing Over Bed 20"
Swing Over Carriage 12.2"
Recom Turing Dia/Length 6.5/14.6
Max Turning Dia 14.6"
Max Bar Working Dia 1.58"
Chuck Size 6.5"
Spindle Nose/Bore A2 #5/1.8
Bearing Dia front/rear 3.1/2.8
Spindle Speed 60-6000 RPM
Spindle Motor Cont/ 30 Min 11/15 HP
Quill Dia/ Stroke 2.6/4.0
Taper of Center MT # 3
Travel Distance X/Z 7.9/15.0
Electric Power Supply 30 KVA
Fanuc 6T
30 deg Slant Design
Hydraulic Tlsk
10 Station Bolt on turret
6" Kitagawa 3 Jaw Chuck
Powerful 15 HP (11 Kw) AC Spindle Motor
Fast 945 IPM (24 m/min) Rapid Traverse
Rigid One Piece Meehanite Cast Iron Bed
Hardened and Ground Box Way Construction
Precision 6000 RPM Cartridge Spindle
Non Stop Bidirectional Turret Indexing
Double end Pretensioned Ball Screw Support
State of the Art 32 Bit Fanuc Controller |
|
| Ad # 14491 | Turning Center 4 - 10 in. chuck |
| 1997 |
Mazak |
QT-30 |
Good |
sold |
Photo /
More Info. |
| 10" check: Mazak QT-30 cnc lathe
10" chuck dia
mazatrol T plus control
programmable tail stock
chip conveyor
std specs below--please verify
Specification Description
MAXIMIM SWING OVER BED: 20"
MAXIMIM SWING OVER CARRIAGE: 15.75"
MAXIMUM TURNING DIAMETER: 12.5"
MAXIMUM TURNING LENGTH: 39.4"
CHUCK SIZE: 10"
X-AXIS TRAVEL/CROSS: 7.8"
Z-AXIS TRAVEL/LONGITUDINAL: 40.1"
X-AXIS RAPID TRAVERSE RATE: 780 IPM
Y-AXIS RAPID TRAVERSE RATE: 980 IPM
NUMBER OF TURRETS: 1
TURRET TOOLING STATIONS: 16
SPINDLE SPEEDS: 40-3300 RPM
SPINDLE NOSE: A2-8
SPINDLE BORE DIAMETER: 3.15"
SPINDLE MOTOR: 30 HP
NET WEIGHT: (APPROX.) 15000 LBS
|
|
| Ad # 14473 | Turning Center 4 - 10 in. chuck |
| 1986 |
Mazak |
QT 8 |
Good |
sold |
Photo /
More Info. |
| —: Mazak QT-8 CNC Lathe
T-2 Control
1986
6" chuck
tailstock
tool eye
Great machine that will hold +/-.0005 with out
a problem. I need to make room for other
equipment. |
|
| Ad # 13716 | Turning Center 4 - 10 in. chuck |
| 87 |
Mazak |
QT8 |
Needs Work |
sold |
Photo /
More Info. |
| —: CONTROL: MAZATROL T-2
MAX. SWING: 11"
STANDARD CUTTING DIA: 4"
MAX. CUTTING DIA: 6"
CUTTING LENGTH: 10"
SPINDLE BORE: 1.97"
SPINDLE SPEED: 4500 RPM
NUMBER OF TOOLS: 8
X AXIS STROKE: 3.75"
Z AXIS STROKE: 11.4"
Note: needs board replaced -have new board
but
not tested machine |
|
| Ad # 4326 | Turning Center 4 - 10 in. chuck |
| 1981 |
Ikegai |
FX25N Chucker(no tailstock) |
Fair |
Sold |
Photo /
More Info. |
| 10" Ikegai Chucker: Fanuc 6TB Control
10" Kitagawa Power chuck with thru hole
Approximate specifications:
2.5" Spindle hole
HP 15
Coolant
2000 RPM |
|
| Ad # 9833 | Turning Center 4 - 10 in. chuck |
| 1991 |
OKUMA |
LB-15 |
Very Good |
Sold |
Photo /
More Info. |
| 10" chuck-big bore: BIG BORE (2.5" THRU HOLE, 10'" CHUCK)
OSP 5020LG W/CONVERSATIONAL PROGRAMMING (ON-SITE TRAINING AVAILABLE).
3,500RPM
12 TOOLS
20.47" Z TRAVEL
6.8" X TRAVEL
15.750" SWING OVER BED.
ALL STANDARD TOOL HOLDERS.
2 LIVE CENTERS.
3 GALS. CIMCOOL.
GREEN AND WHITE TOUCH UP PAINT.
ALL MANUALS.
CONTROL SOFTWARE, ETC.
|
|
| Ad # 12923 | Turning Center 4 - 10 in. chuck |
| 1995 |
Nakamura-tome |
TMC-12 |
Excellent |
Sold |
Photo /
More Info. |
| 6" chuck size: Chuck Size: 6" / 152.4 mm
Bar Capacity: 1.600 " / 40.6 mm
# Axis: 2
Power: 7.5 hp / 5.6 kW
RPM:4500 rpm
Turning Dia: 9" / 228.6 mm
Max Swing: 11.81"
Centers: 7.870 " / 199.9 mm
Dimensions: 55 x 49 x 64
Weight: 4730
Control: FANUC 21T |
|
| Ad # 12924 | Turning Center 4 - 10 in. chuck |
| 2000 |
Nakamura-tome |
TW-10 |
Excellent |
Sold |
Photo /
More Info. |
| —: NAKAMURA-TOME 4-AXIS CNC TURNING CENTER,
2000
Twin Spindle , Twin 12 Station Turrets.
Max Swing Over Bed: 8.26" / 210mm Dia
Max Turning Dia: 8.22" / 209mm
Distance Between Spindles: 30.11" / 765mm
Max Machinig length: 6.06" / 154mm Dia
Bar Feed Capacity: 2" / 51mm Dia
Control: Fanuc 18iTT control |
|
| Ad # 14870 | Turning Center 4 - 10 in. chuck |
| 2014 |
haas |
ST30-SSY |
Excellent |
sold |
Photo /
More Info. |
| 10" chuck: 2014 Haas ST30-SSY for sale.
This is a 1 year old machine
. It still has 1 year left on a two year
warranty.
It has the following:
24 station turret
Automatic Tool Pre Setter
Hydraulic Programmable Tailstock
Intuitive Programming System
Belt Chip Conveyor
High Intensity Lighting
Servo Auto Door
Internal High Voltage Isolated Transformer
for 380-480V
Oper.
1 More Year of Extended Warranty
Standard Tool Holder Kit
Includes 16 Assorted Haas turret tool
holders for turning,
facing, boring
Included:
Benz Live Tooling
3 Axial Tools W/Solid Fix Quick Change
Spindles
3 Radial Tools W/Solid Fix Quick Change
Spindles
1 Parlec Radial Tool
1 Adjustable Angle Live Tool W/Solid Fix
Quick Change
Spindles +- 100 Degrees
Assorted Tool Holders For Turret Mounting.
6 Solid Fix Adapters ER-32
4 Solid Fix Adapters ER-16
Benz Tooling
B2-40 X1.00 Short Turning Holder
B6-40X1.00 Static Tool Holder
B300 -4-S4 Assembly Block Size S4
E4-40-32 Static Tool Holder VDI 40, ER-32
Collet Chuck
25 MM Wrench
B300 -4-S3 Assembly Block Size S3
Setting Tool For VDI Tool Alignment
Assorted Tools and Wrenches
Collet Chuck
22 Collets
Spindle Liner’s for collets and 3 jaw
chuck, Range, ½”-1 ¾”
Bar Puller P/N 43302
10” 3 Jaw Chuck
4 Sets Of Hard Jaws, (2 Brand New)
6 Sets of Soft Jaws (Steel)
8 Sets of Soft Jaws (Aluminum)
I Set of 4”High Aluminum Pie Jaws. (New)
This machine new last year was $122,000.00
It has an additional $30,000.00 in tooling
alone.
Cutting Time is Only 450 hrs.as of 11-2015
Machine has been recently had routine maint
performed,ready to go!
|
|
| Ad # 12906 | Turning Center 4 - 10 in. chuck |
| 1989 |
Miyano |
GN-4 |
Good |
sold |
Photo /
More Info. |
| 4" Chuck: Miyano GN-4
Fanuc OT Control
|
|
| Ad # 12908 | Turning Center 4 - 10 in. chuck |
| 1997 |
Omniturn |
GT-75 |
Good |
sold |
Photo /
More Info. |
| 9" 12": Omni Turn GT - 75
GT-75
Specifications
X axis travel 12"
Z axis travel 9"
Center height 3/8", 1/2" or 5/8"
Tooling plate 14" x 6"
Tooling type Gang type
Axis repeatability .00005"
Axis resolution .00005"
Axis accuracy .0001"
Control OmniTurn
Rapid travel 300 ipm
Feed rate Slowest .00005"/rev Fastest 300ipm
Threading Finest 240/inch Coursest .5"/rev
Axis thrust 300# maintained
500# peak
Axis motors Servo - Closed loop
4000 counts per rev.
Axis time for 0 to 300ipm .02 second
Construction
Linear ways 20mm THK
Ball screws 5/8" diameter - 5 pitch
Base billot 15" x 50" x 6"
MJ7 composite
Headstock Cast Iron
Surface finish Heavy duty powder coat
Coolant pump 1/8hp @3800rpm
Spindle - Standard
Cartridge type Class 7 angular contact
Spindle taper - ID 5C
Spindle taper - OD Plain or Cam-lock
Spindle RPM - standard drive 100 - 4000 rpm
Spindle HP - standard drive 5HP
Speeds programmed as RPM and CSF
Collet closer Pneumatic
Collet closer pull force 1,800# at 80psi
C axis spindle
Spindle RPM 0 - 4000 standard
0 - 5000 optional
Spindle HP - C axis 4.5hp
C axis resolution .1 degree
Speeds programmed as RPM, CSF, C, C/X, C/Z, C/X/Z
Requirements
Air 3 CFM
Electrical 110V - 10amp
220V - 20amp
Floor plan - GT-Jr 32" x 50"
|
|
| Ad # 6937 | Turning Center 4 - 10 in. chuck |
| 1989 |
NAKAMURA-TOME |
TMC 30 |
Very Good |
Sold |
Photo /
More Info. |
| NAKAMURA-TOME MODEL TMC 30 CNC TURNING CENTER: NAKAMURA-TOME MODEL TMC 30 CNC TURNING CENTER
Tailstock
10 Station Turret
Fanuc 11T Control |
|
| Ad # 6936 | Turning Center 4 - 10 in. chuck |
| 1988 |
Mazak |
"QUICK TURN" 8 |
Very Good |
Sold |
Photo /
More Info. |
| MAZAK MODEL "QUICK TURN" 8 CNC LATHE: MAZAK MODEL "QUICK TURN" 8 CNC LATHE
Maximum Swing: 11.80"
Turning Diameter: 6.30" (Maximum)
3.94" (Standard)
Distance Spindle Nose to Turret Face: 3.94" - 15.35"
Maximum Work Length: 9.84"
Maximum Work Weight: 66 Lbs
Spindle Speed: 45 - 4500 RPM
Spindle Nose: JIS A2-5"
Through Spindle Hole Diameter: 1.97"
Spindle HP: 7.5/5.0
Turret Size: 9.45"
Number of Tools: 8
X-Axis Travel: 3.94"
Z-Axis Travel: 11.42"
Tailstock Travel: 12.80"
Tailstock Quill Diameter: 1.97"
Tailstock Quill Stroke: 2.95"
EQUIPPED WITH:
Mazatrol Cam T-2 CNC Control
(6") Hydraulic Power Chuck
Tool Eye
Automatic Lube System
AC Main Spindle Motor |
|
| Ad # 9007 | Turning Center 4 - 10 in. chuck |
| 1988? |
Mori Seiki |
SL-2H |
Fair |
sold |
Photo /
More Info. |
| 2.5": collet chuck, tailstock,yasnac contol,used for production 1 month ago, bar ... |
|
| Ad # 10886 | Turning Center 4 - 10 in. chuck |
| 1997 |
Cincinnati Milacron |
Falcon 200 |
Excellent |
sold |
Photo /
More Info. |
| 8" Chuck, 2.64" Bar: 1997 Cincinnati Milacron Falcon 200 CNC turning center
Max. turning length : 15.75"
Max. turning diameter : 9.84"
Max. thru spindle : 2.64" diameter bar
Spindle speeds : 40 - 4500 RPM
Turret : 12 station, V.D.I.40
Tailstock : programmable
CNC control: Acramatic A2100E
Spindle HP : 15
Spindle Taper: A2-6
Options: Ethernet, Floppy Drive
|
|
| Ad # 10885 | Turning Center 4 - 10 in. chuck |
| 2005 |
wasino |
G07 |
New |
sold |
Photo /
More Info. |
| —: MACHINE HAS NEVER BEEN USED.
HAS FULL FANUC WARRANTY
BOX DOVE TAIL WAYS
INTERIOR STAINLESS STEEL
HAS WASINO BAR FEEDER
PARTS CATCHER
Max. Chuck Size 5" HAS NO CHUCK
- Bar Capacity (requires collet chuck) 1-¨ö"
- Spindle Nose100mm Flat
- Spindle Bore1¨ú"
- Max. Spindle Speed6,000 rpm
- Spindle Motor, (duty rated) 7.5 hp
- Spindle Center Height 39¨ü"
- X Axis Travel18.9"
- Z Axis Travel11.2"
- X Rapid Traverse472 ipm
- Z Rapid Traverse787 ipm
- Floor Space Requirement56" x 68"
- Machine Height76"
- Machine Weight3,850 lbs.
- Power Requirements 208/60/3 11.5 kva
- Minimum Programmable Increment .00001"
- Two Axis Control
- Linear and Multi-Quadrant Circular Interpolation
- Automatic Linear Acceleration/Deceleration for Rapid Traverse and Exponential for
feedrate
- Memory for storage up to 1049' of Program Tape, up to 400 Program Storage (4-digit
program number)
- Keyboard Type Manual Data Input (MDI)
- 7" Monochrome CRT Display
- 64 Pairs of Tool Offsets
- Direct Input of Offset Amount A
- Tangential Speed Constant Control
- Program Search and Display
|
|
| Ad # 11701 | Turning Center 4 - 10 in. chuck |
| 2001 |
Hyundai |
HIT-15 |
Excellent |
sold sold sold sold |
Photo /
More Info. |
| Max swing (17.32) Max cutting (10.6x19.69) Max bar work size (2"): HYUNDAI HIT 15 CNC TURNING CENTER, WITH
SIEMENS MODEL 840D CNC CONTROL WITH THE
FOLLOWING
STANDARD EQUIPMENTS: DATE OF
MANUFACTURIN: 2001
-DEPRO-PRO PROGAMMING
- HIGH RESOLUTION COLOR GRAPHICS DISPLAY
-AUTOMATIC TOOL SETTING SYSTEM [TOOL EYE]
-SPINDLE ORIENTATION [1 DEGREE]
-STANDARD WORK LIGHT
-COMPLETE COOLANT SYSTEM [14 PSI/15.8 GPM].
TANK CAPICITY 52.8 GALS
-CHIP AND COOLANT SPLASH GUARDING [FULLY
EMCLOSED]
-PROGRAMMABLE TAILSTOCK BODY AND QUILL
-8 INCH DIAMETER HYDRAULIC THRU-HOLE CHUCK
PACKAGE: [DRAW TUBE ID: 2.05 INCH, KITAGAWA
B208A0615
WITH 1 SET OF JAWS
-HYDRAULIC UNIT [1.5KW MAXIMUB 850 PSI
-8 POSITION (8) DRUM TURRET
-AUTOMATIC LUBRCATION SYSTEM
-CHUCK FOOT SWITCH
-FRONT DOOR INTERLOCK
-MACHINE ELECTRIC WIRED 220V +/_ 5% VOLT
OPERATION
-AUTOMATIC PART CATCHER
-CHIP CONVEYOR
-ATS 16C COLLET CHUCK
-ATC 5C COLLET CHUCK
-ONE SET OF ADJUSTING TOOLS
-ONE SET OF OPERATIONAL MANUAL |
|
| Ad # 14852 | Turning Center 4 - 10 in. chuck |
| 1996 |
Kia |
KT21 |
Good |
sold |
Photo /
More Info. |
| 17.7 Swing x 15.3 length: 8" chuck: 1996 Kia #K21 turning center
chuck: 8" 3 jaw
capacity max:17.7"Swing x 15.3" length
std machining:Dia: 8.26",length: 15.3"
bar capacity: 2"
tool setter eye
spindle speed: 25-4,000 rpm
spindle nose: A2-6
turret type: 10 deg angle variable arrangement: 10 stations
base holder dia:1.25"
tool size: 1" OD
tool size:1.25" ID
tailstock: stroke 15.7",forward and backward movement by control or jog
tailstock: 4MT
feedrate X max: rapid: 25m/min
feedrate Z Max: 30m/min
spindle motor power: AC: 11/15 KW
control: Yasnac YLX3:2 axis simultanious
chip pan only
power required: 22KVA: 220/3
all manuals included
Was set up on bar feed system-not included
Note: very clean ,low hr machine..used mainly at trade shows.. |
|
| Ad # 13653 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
SB 3 GN Superslant |
Good |
sold |
Photo /
More Info. |
| 8" x 16": Hardinge SB 3 GN Superslant
Year: 1984
Control: Fanuc GN6
8 Tool Turret
8 Tool End Working Turret (tail stock)
13 HP
Spindle Bore: 1 7/8"
4000 RPM
Bar Feeder 20ft (omnibar 45FS)
rigging/loading fee approx: $1500
2 machines just alike available-one running other needs new boards-will sell for parts additional $3500.00 |
|
| Ad # 13656 | Turning Center 4 - 10 in. chuck |
| 1994 |
Hardinge |
Cobra LC 65 |
Needs Work |
sold |
Photo /
More Info. |
| 10" x 30": Hardinge CNC Lathe
Model: Cobra LC65
Spindle Bore 2 1/2"
RPM 4500
25 HP
Control Fanuc Series 21-T
Tail Stock
12 Tool Turret
Chip Conveyor
7,000 HRS on meter
Machine powers up and has alarm issues that needs
minor work, has a few alarm codes
|
|
| Ad # 1496 | Turning Center 4 - 10 in. chuck |
| 1983 |
Hardinge |
Super Slant SB-GN |
Good |
sold |
Photo /
More Info. |
| Hardinge Twin Turret 6" Lathe: twin 8 Station Turrets (4-axis for speed)
6" chucker
Swing Over Bed 22"
DBC 30"
Spindle 15 hp
Control Fanuc/GE GN 6TC
RS232
Twin turret machine..
INCLUDES:
Full Documentation
6" 3-Jaw chuck
Collet Chuck that accepts either 16C or 5C collets
Misc collets
Actuator for above chucks
Chip Conveyor
Hardinge Bar Feeder
|
|
| Ad # 8994 | Turning Center 4 - 10 in. chuck |
| 2002 |
OKUMA |
LU-15-2SC-1000 |
Good |
sold |
Photo /
More Info. |
| Chuck 8": Chuck 8"
Bar Capacity 2"
Turning Diameter 14"
RPM 4,500
Centers 40"
Twin Turret 12 +8
30HP
20" Swing
Equipped With E100 Control
Chip Conveyor
Tail Stock
A2-6 Spindle Nose
Transformer
Side Discharge Chip
|
|
| Ad # 5441 | Turning Center 4 - 10 in. chuck |
| — |
Clausing |
Colchester |
Good |
Sold |
Photo /
More Info. |
| Clausing Colchester Lathe: Clausing Colchester Lathe; 15" x 60"; Coolant; Turret attachment; 230 volts... |
|
| Ad # 11664 | Turning Center 4 - 10 in. chuck |
| 1985 |
Mazak |
Quick Turn 20N |
Good |
sold |
Photo /
More Info. |
| Mazak Quick Turn 20N 2 Axis CNC Lathe: Item #1002 Mazak Quick Turn 20N 2 Axis CNC Lathe
max Swing: 20.8"
Max. Cutting Diameter: 12.6"
Max. Cutting Length: 39"
Spindle Nose: A2-8"
Spindle Bore: 3.15"
Max Bar Capacity: 2.50"
Spindle Speeds: 3,000 RPM
Turret Type: 8 Position
Rapid Traverse Rate: 472 IPM
Main Motor: 30 HP
Equipped With:
Mazatrol Cam T-2 CNC Control
8" 3-Jaw Hydraulic Chuck
Tailstock
Tool Presetter
Jorgenson Chip Conveyor
Year Mfg. 1985 Item #1002
**SPECIFICATIONS SUBJECT TO VERIFICATION**
Rigging and Hauling Not Included
|
|
| Ad # 11665 | Turning Center 4 - 10 in. chuck |
| 1996 |
Okuma |
Cadet LNC-8C |
Good |
sold |
Photo /
More Info. |
| Okuma Model Cadet LNC-8C 2-Axis CNC Lathe: Item #1003 Okuma Model Cadet LNC-8C 2-Axis CNC Lathe
Okuma Model Cadet LNC-8C 2-Axis CNC Lathe
no tool setter
Swing Over Bed: 15.75"
Turning Diameter: 9.84"
Center Distance: 20"
Bar Capacity: 2"
Spindle Speeds: 4,200 RPM
Main Motor: 15 HP
Equipped with:
OSP 700L -Control
8" SMW Quick Change Chuck
Chip Conveyor
RS-232
All Available Manuals
Year Mfg. 1996 Item #1003
**SPECIFICATIONS SUBJECT TO VERIFICATION**
Rigging and Hauling Not Included
|
|
| Ad # 11655 | Turning Center 4 - 10 in. chuck |
| 1980 |
HES |
300 |
Very Good |
Sold |
Photo /
More Info. |
| 12" x 27": H.E.S Model 300
12" x 27"
3 Jaw 8" chuck
5000 Rpm
Fanuc GN6 Controll
1" 3/8" Spindle bore
12 Tool Turret |
|
| Ad # 6878 | Turning Center 4 - 10 in. chuck |
| 1987 |
OKUMA |
LB-15 |
Very Good |
Sold |
Photo /
More Info. |
| OKUMA CNC LATHE, MODEL LB-15: 1 PREOWNED OKUMA CNC LATHE, MODEL LB-15
SPECIFICATIONS
SWING OVER BED ------------------------------ 15.75"
MAX. TURNING DIA. --------------------------- 9.84"
MAX. WORK LENGTH ---------------------------- 19.69"
(CHUCK WORK 9.06")
SPINDLE BORE -------------------------------- 2.20"
SPINDLE NOSE -------------------------------- A-2-6
SPINDLE SPEEDS ------------------------------ 75-4, 200 RPM
(2 RANGES, INFININTELY VARIABLE)
Z-AXIS TRAVEL ------------------------------- 20.47"
X-AXIS TRAVEL ------------------------------- 6.89"
CUTTING FEED RATES -------------------------- .0001-40.000 IPM
RAPID TRAVERSE RATE ------------------------- 472 IPM
TAILSTOCK QUILL STROKE ---------------------- 4.72"
TAILSTOCK CENTER TAPER ---------------------- #5 MT
SPINDLE MOTOR (30 MIN./CONT.) --------------- 15/10 HP
HYDRAULIC TANK CAP. ------------------------- 10 GAL.
EQUIPPED WITH
OSP 5000L-G CONTROL |
|
| Ad # 6876 | Turning Center 4 - 10 in. chuck |
| 1987 |
OKUMA |
LB-12 |
Good |
Sold |
Photo /
More Info. |
| OKUMA LB-12 CNC LATHE WITH CHIP CONVEYOR: 1 PREOWNED OKUMA LB-12 CNC LATHE WITH CHIP CONVEYOR
SPECIFICATIONS
NOMINAL SIZE ----------------------------- 200 x 350
NUMBER OF AXES --------------------------- 2
SWING OVER BED --------------------------- 13.78"
MAX. TURNING DIA. ------------------------ 7.87" x 13.78"
BORE DIA. -------------------------------- 2.20"
SPINDLE NOSE ----------------------------- ASA A2-6
INTERNAL TAPER --------------------------- MT #6
NUMBER OF SPINDLE SPEEDS ----------------- INFINITELY VARIABLE
Z-AXIS TRAVEL ---------------------------- 14.57"
X-AXIS TRAVEL ---------------------------- 4.13" + 1.57"
CUTTING FEEDRATE ------------------------- .0001-40.000 IPR
RAPID TRAVERSE SPEED --------------------- 472 IPM
SIZE OF ID/OD TURNING TOOL --------------- 1"x1",1-1/2"
BED -------------------------------------- 35.43" x 15.35"
DIA. OF QUILL ---------------------------- 3.15"
TAPER OF CENTER -------------------------- MT #4
QUILL STROKE ----------------------------- 3.94"
MOTOR ------------------------------------ 10/7.5HP
EQUIPPED WITH
CHIP CONVEYOR, TURBO MODEL 6275-812
COOLANT THRU TOOL HOLDERS
8 STAION TOOL TURRET
OKUMA OSP5000L-G CONTROL |
|
| Ad # 8981 | Turning Center 4 - 10 in. chuck |
| 1998 |
Mori Seiki |
SL-250B/500 |
Very Good |
Sold |
Photo /
More Info. |
| 10" 3 jaw chuck w/ bar feeder: 10" 3 jaw chuck
10 station turret
hyd. programmable tailstock
parts catcher
bar feed system-LNS servo 52
control- MSC-500 Mori
Factory Specs-verify below..
MORI SEIKI SL-250 B 500
CNC LATHE
With FANUC MSC 500 CNC CONTROL
SPECIFICATION:
Swing Over Bed 26.77"
Swing over cross Slide 20.08"
Max Turn Diameter 15.31"
X Axis Travel 9.25"
Z Axis Travel 20.47"
Rapid Traverse Rate: 945 IPM
Spindle Nose: A2-8
Spindle Bore: 3.38"
Spindle Drive Motor: 20 HP / 15 HP
Spindle Speed -Main 5000 RPM
Turret Capacity: 12 Tool
Machine Weight: 10,000 Lbs.
Approximate Dimensions: 97" x 73" x 74.2"
Equipped With:
MSC 500 CNC Control
Turbo Side-Discharge Chip Conveyor
Coolant System
All Available Manuals
10" Chuck Main Spindle
Parts Catcher
Manual Tool Eye
|
|
| Ad # 8978 | Turning Center 4 - 10 in. chuck |
| 1984 |
Mori-Seiki |
SL-2H |
Good |
Sold |
Photo /
More Info. |
| No chuck: Hyd. Turrent 10 tool stations .
Yasnac LX1 Control.
Hole thru Spindle 3.03" .
Spindle nose A-6
Spindle Speed 25-2500 RPM .
Max travel X axis 6.3" Max Travel Z axis16.1" .
Riken Hyd. with draw bar tube no chuck or collet on it.
Chip Conveyor . |
|
| Ad # 4027 | Turning Center 4 - 10 in. chuck |
| 1986 |
Hardinge |
CHNC-1 |
Good |
Sold |
Photo /
More Info. |
| HARDINGE HIGH SPEED PRECISION CHUCKER: 16-C Collet Chuck
Spindle Power: 7.5 hp
Spindle Bore: 1 5/8"
Spindle Speed: 0 - 5,000 rpm
Chuck With Hardinge 16C Collet |
|
| Ad # 13628 | Turning Center 4 - 10 in. chuck |
| 1993 |
Okuma |
LNC 8C |
Needs Work |
sold |
Photo /
More Info. |
| 9" x 20": Okuma LNC 8C
10" Chuck
12 Station Tool Changer
TailStock
2 ½ Bore
Chip Conveyor
New bearings in motor
OSP5020L CNC Control
OSP5020L/OSP500l-G Special Functions Manual &
Alarms & Error Manual
Approximate Weight: 10000 Lbs
|
|
| Ad # 7942 | Turning Center 4 - 10 in. chuck |
| 1966 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
6 position turret
cut-off attachment
Automatic threading attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 7941 | Turning Center 4 - 10 in. chuck |
| 77-78 |
Hardinge |
AHC |
Good |
Sold |
Photo /
More Info. |
| Hardinge AHC Automatic Precision Chucker: 1-1/16" bar capacity
14" swing over ways, 6" over cross slide
12' bar feed
6 position turret
cut-off attachment
Automatic threading attachment
Taper Attachment
Parts Discharge slide
roll-around console control
Hardened and Ground Dovetailed Bed
Coolant system |
|
| Ad # 5404 | Turning Center 4 - 10 in. chuck |
| 1998 |
MAZAK |
QT-200 |
Very Good |
sold |
Photo /
More Info. |
| 1998 MAZAK QUICK TURN 200: Mazatrol EIA, 2" Bar, 8" Chk, 12 Tools, 4000 RPM, 15HP, G-Code Programming,... |
|
| Ad # 9739 | Turning Center 4 - 10 in. chuck |
| 2006 |
Daewoo |
LYNX 220LC |
Very Good |
Sold |
Photo /
More Info. |
| collet lathe # 3J dead length w/ parts catcher: FEATURES
·20 HP spindle drive
·Large bar capacity
·Part catcher
·High speed spindle
·Heavy duty turret with 8.3” Curvic coupling
·Separate coolant tank
·Fast 0.15 second turret indexing
·One-piece Meehanite cast iron slant bed
·Pre-tensioned X axis ball screw
·Fast 1,417 IPM rapid traverse
·Large 12.6” maximum turning diameter
·65 PSI coolant pump
·Metered piston distributor lubrication
·Way lube separation system
·Electric torque limiters
·Tool setter
·Rigid tapping
·Compact design requires minimal floor space
SPECIFICATIONS
CAPACITY:
Swing over bed 20.1”
Swing over carriage 11.4”
Maximum turning diameter 12.6”
Maximum turning length-Lynx 220A12.7”
--Lynx 220LC20.7”
SPINDLE:Lynx 220ALynx 220CLynx 220LC
Spindle speed (RPM)60-6,00045 - 4,50040-4,000
Spindle noseASA-A2-5ASA-A2-6ASA-A2-6
Draw tube I.D.1.81”2.68”2.68”
Spindle bore diameter2.08”2.99”2.99”
A.C. Spindle Motor (15 minute rating)20 HP20 HP20 HP
Maximum spindle torque (15 minute rating)70 ft.-lbs.102 ft.-lbs.123 ft.-lbs.
BED, SADDLE, & CROSS SLIDE:
X axis travel6.9”
Z axis travel-Lynx 220A and Lynx 220C13.0”
-Lynx 220LC 21.6”
Inclined angle of bed30 degrees
X axis rapid traverse rate1,181 IPM
Z axis rapid traverse rate1,417 IPM
X axis ball screw diameter1.1”
Z axis ball screw diameter1.3”
Maximum X axis feed thrust1,440 lbs.
Maximum Z axis feed thrust1,660 lbs.
X axis repeatability+ 0.00006”
Z axis repeatability+ 0.00008”
TURRET:
Number of tools12
Turning tool shank size1.0”
Boring bar diameter1.5”
Turret index time (next station)0.15 sec.
Tool selectionBi-directional
Curvic coupling diameter8.3”
Turret clamping force8,765 lbs.
Turret index repeatability+ .0005 degree
TAILSTOCK (optional on Lynx 220A and 220C):
Tailstock quill diameter2.6”
Tailstock quill stroke (programmable)3.1”
Maximum tailstock quill thrust / maximum hydraulic pressure810 lbs. / 425 PSI
Tailstock spindle taperMT #4
COOLANT SYSTEM:
Coolant pump pressure65 PSI
Coolant pump motor1.2 HP
Coolant tank capacity (Lynx 220 / 220L)30 gal. / 32.5 gal.
HYDRAULIC / LUBRICATION:
Hydraulic tank capacity3 gal.
Hydraulic oil required (or equivalent)Mobile DTE 24 or Shell Tellus 32
Way Lubrication tank capacity0.5 gal.
Way Lubrication oil required (or equivalent)Mobile Vactra #2 or Shell Tonna T68
GENERAL:
Floor space – Length X Width (Lynx 220 / Lynx 220L)91” x 63” / 101” x 63”
Machine weight (Lynx 220A / Lynx 220C / Lynx 220LC)6,380 lbs / 6,490 lbs / 7,700 lbs.
Voltage required205 – 235 volt / 3 phase
Power requirement24 KVA (63 amps @ 220 volts)
|
|
| Ad # 13598 | Turning Center 4 - 10 in. chuck |
| 2003 |
Okuma |
MacTurn 250BBW |
Excellent |
sold |
Photo /
More Info. |
| Main 10", Sub-spindle 6", 2.75" Bar: Macturn 250BBW-2S/1000 Big bore Lathe/mill
(Main A28,2.75" bar feed capacity). .001
degree B-axis upper milling head and 12-station
VDI lower turret.
2 spindle machine,10" main spindle chuck and
6" sub-spindle. Machine comes with ATS collet
chucks w/S26 master collets on both spindles.
ATC 44 tools in back of machine:Capto-C6.
Side chip conveyor.
ALSO comes equipped with 6' LNS QuickSix bar
feeder and ChipBlaster JV8-1000 high pressure
coolant system for thru-spindle coolant.
Std specs below-please verify actual machine
Okuma OSP-100L CNC Control
20.87" Swing
3800 RPM Spindle Speed Left
5000 RPM Spindle Speed Right
44 ATC Turret Positions
10" & 8" Chucks
Parts Catcher
Lower Turret with Milling Function
Chuck Air Blow
Chip Conveyor
Thru Milling Coolant
Touchsetter Automatic
Barfeed Interface
Admac Off-Line Parts Package
Auto Door w/Dual Cycle
This Macturn is a machine shop all in one
package.
Machine is under power and working.
was sold for 470K when new
|
|
| Ad # 11596 | Turning Center 4 - 10 in. chuck |
| 2004 |
Daewoo Puma |
240B |
Very Good |
sold |
Photo /
More Info. |
| 10" chuck: 2004 DAEWOO PUMA 240B
Chuck Size 10"
Max Diameter Bar Capacity 2.6"
Max Swing Over Bed / Carriage 21.7" / 15.4"
Turning Diameter (Max / Std) 13.8" / 8.3"
Distance Between Centers 26.3"
Max Machining Length 21.6"
Main Motor 25 / 20 HP AC
Tools 12
Spindle Speed 50 - 4500 RPM
Spindle Bore 2.99"
Spindle Nose A2-6
Spindle Torque 227 ft. lbs.
Rapid Traverse Rates (X / Z) 945 / 1200 IPM
X-Axis Travel 9.5"
Z-Axis Travel 22.8"
Turret Index (Single Step) 0.1 Seconds
Tailstock Taper MT #4
Machine Dimensions (L x W x H) 126.4" x 62.7" x 68.5"
Machine Weight 9470 lbs.
FEATURES:
FANUC 0iTB CNC CONTROL
10.4" Color LCD
8" Samchully H-08 3-Jaw Hydraulic Chuck
Programmable Tailstock Body & Quill
Automatic Tool Presetter
Servo Driven Turret
Turbo Chip Conveyor
Auto Parts Catcher
Slant Bed Box Way Construction
(4) Boring Bar Holders
(3) OD Wedge Blocks
Mfg Date November 2004
|
|
| Ad # 10734 | Turning Center 4 - 10 in. chuck |
| 1999 |
HAAS |
SL20 |
Good |
sold |
Photo /
More Info. |
| 8" 3 Jaw Hydraulic Chuck : HAAS SL20 CNC LATHE
1999 Haas SL20 CNC Lathe
8" 3 Jaw Hydraulic Chuck
ATS S20 Pad Type Collet Chuck
Parts Catcher
10 Station Turret
4000 RPM
Extended Memory
|
|
| Ad # 11598 | Turning Center 4 - 10 in. chuck |
| 2002 |
Daewoo |
Lynx 210LC |
Very Good |
Sold |
Photo /
More Info. |
| 8.25" chuck: 2002 DAEWOO LYNX 210LC
Chuck Size 8.25"
Max Diameter Bar Capacity 2.5"
Max Swing Over Bed / Carriage 20.1" / 13.7""
Max Turning Diameter 11"
Max Turning Length 20"
Tools 12
Spindle Motor 15 / 10 HP
Spindle Speed 45 - 4500 RPM
Spindle Bore 2.9"
Spindle Nose A2-5
Rapid Traverse Rates (X / Z) 630 / 945 IPM
X-Axis Travel 6.2"
Z-Axis Travel 12.9"
Turret Index (Single Step) 0.12 Seconds
Tailstock Taper MT #4
Machine Dimensions (L x W x H) 101" x 63" x 65"
Machine Weight 7700 lbs.
FEATURES:
FANUC 0iT CNC CONTROL
10.4" Color LCD
ATS A6-3J Collet Chuck
Tailstock
Manual Tool Presetter
Turbo Chip Conveyor
Auto Parts Catcher
Box Way Construction
(5) Boring Bar Holders
(5) OD Wedge Blocks
Mfg Date May 2002
|
|
| Ad # 8956 | Turning Center 4 - 10 in. chuck |
| 85?? |
Hitachi Seike |
3NE |
Good |
sold |
Photo /
More Info. |
| 6.5 in chuck, no tailstock-chucker: chucker-no tailstock
control-Fanuc 6T
6.5" 3 jaw chuck
12 station turret
RS232 port
approx: 15HP ?
spindle bore 1-3/4"
renishaw probe interface box
rigging fee to load 600.00 |
|
| Ad # 6740 | Turning Center 4 - 10 in. chuck |
| 2001 |
Hyundai |
HIT-8G |
Very Good |
Sold |
Photo /
More Info. |
| 2001 Hyundai HIT-8G: 2001 Hyundai HIT-8G
Max Swing 11.81"
6000 RPM
10 HP
6" Chuck
Parts Catcher
Chip Conveyor |
|
| Ad # 6733 | Turning Center 4 - 10 in. chuck |
| 1999 |
Femco |
HL-15 |
Very Good |
Sold |
Photo /
More Info. |
| 1999 Femco HL-15: 1999 Femco HL-15
6” Chuck
23” Centers
1.77 Bar
6,000 RPM
10 HP
12 Station Turret
Chip Conveyor
Tail Stock
Fanuc OT Control.
(2) Two Machines Available
|
|
| Ad # 6749 | Turning Center 4 - 10 in. chuck |
| 2002 |
Mori Seiki |
SL-154Y |
Very Good |
Sold |
Photo /
More Info. |
| 2002 Mori Seiki SL-154Y: 2002 Mori Seiki SL-154Y
6" Chuck
1.77" Bar Cap
4000 RPM
MAPPS CNC Control
12 Station Turret
Chip Conveyor |
|
| Ad # 6730 | Turning Center 4 - 10 in. chuck |
| 1990 |
Daewoo |
Puma 6-3A |
Good |
Sold |
Photo /
More Info. |
| 1990 Daewoo Puma 6-3A: 1990 Daewoo Puma 6-3A
Fanuc O Control
12 Position Turret
6" Chuck
Barfeeder
1.5" Bar Capacity
Tailstock |
|
| Ad # 8878 | Turning Center 4 - 10 in. chuck |
| 2006/07 |
HURCO |
TM6 |
Excellent |
Sold |
Photo /
More Info. |
| 10in swing x 12.8 in cut length: Capacity:TM6
6" chuck A2-5
X-axis Travel7”
Z-axis Travel14”
Distance Between Centers15.8"
Swing Over Bed 15.94”
Swing Over Cross Slide9.45”
Maximum Turning Diameter12.4”
Maximum Turning Length13.4”
Spindle:
Spindle NoseA2-5
Spindle Speed (RPM)6,000 rpm
Spindle Motor Horsepower (1 min.)17.5
Spindle Motor Torque (1 min.)81.5 ft-lbs @ 1125 rpm
Spindle Chuck6” Diameter
Spindle Bore Diameter2.2”
Maximum Bar Capacity1.77”
Motion:
X-axis Rapid Feed Rate750 ipm
Z-axis Rapid Feed Rate945 ipm
Least Command Increment0.0001”
Positioning Accuracy-/+ 0.0002”
Repeatability-/+ 0.0001”
Hydraulic Tool Turret:
Number of Stations12
RotationBi-Directional
Turret Index Time (Adjacent).5 Seconds
Turret Index Time (Furthest location)1.5 Seconds
OD vs. ID toolsAny Combination
Tool Shank Width.75” x .75”
Maximum Boring Bar Diameter1.25”
Power Rating16.25 KVA
Standard Machine Features:
Powerful 15 HP Spindle Motors-6,000RPM
A2-5 Series Spindle Nose
Fast 750/945 ipm Rapid Traverse in X and Z
3-Jaw Chuck including Soft Jaws
Automatic Central Lubrication System
.5 Second Tool Index Time (Adjacent)
Large Work Cylinder
Wide Enclosure Door Openings
Shortest Path Tool Turret Indexing
Flood Coolant Assembly
Standard Control Features:
Conversational Turning Programming
12” Color LCD Monitor
NC (G-code) Programming
Wire Frame Graphics ( Conversational only)
40 GB Hard Drive
2 GB RAM Memory
USB 2.0 Port
Text Input Capabilities
2.8 GHz Pentium 4 Processor
UL/CSA Qualified Certifications
RS-232 Port
12 station turret
.5sec adjacent tool change time
travel:7in X, 14in Z center dist 13.5 in
swing over bed 16 in
swing over cross slide 10"
max turning dia 10" x 12.8 in max length
Single Screen WinMax® Control
The power of the WinMax Control, is the result of Hurco's three decades of customer-centered software experience combined with the proven platform of Microsoft Windows. Power packed with 25 new features and hundreds of enhancements to existing software features, our engineers designed WinMax to maximize efficiency, increase productivity, and improve surface finish. The WinMax control is equipped with two programming options so you can decide the best programming method for each job—Hurco's shop floor programming, called Hurco Conversational, or NC (M and G codes) part programming.
Conversational programming allows you to program a part at the machine by reading the print or program worksheet. As you program the part, prompts and questions appear on the screen. You respond by selecting machine operations or entering part dimensions. The software steps you through.
NC part programs can be created using the CNC software on the control or imported from an offline CAM System. With an enhanced NC interpreter, multi-line NC run time monitor with a G-Code modal display, and canned G-Code probing cycles, the NC side of the Max control is just as powerful as the Conversational programming method for which Hurco is known.
Standard Control Features:
Stop Cycle Button
Constant Surface Speed
Optional Stop
Auto Interrupt Cycle
Spindle Jog
Automatic Tool Home
Coolant Select
Distance to Go (Conversational & NC)
Turret Index Control (Auto/Manual)
Feed Hold Button
Power On Diagnostics
Feed-Rate Override 0-150%
Leadscrew Compensation
Rapid Override 0-100%
Backlash Compensation
RPM Override 0-200%
Program Manager Function
Single Cycle Mode
has tailstock
no chip conveyor or bar feeder
also includes Win Max classic pkg-touch screen, 3D graphics, disc drive
tailstock-manual position W/ programmable quill
6-3/4" insert tooling holders-3 roughing/turning, 2 threding, 1 finishing/profiling holder |
|
| Ad # 13531 | Turning Center 4 - 10 in. chuck |
| 2000 |
Johnford |
TC-35 |
Good |
sold |
Photo /
More Info. |
| 10" chuck: 20" swing over bed: 30" centers: 2000 Johnford TC-35 CNC Lathe
control: Fanuc 18T
10"-3 jaw Chuck
Swing : 20.8" over bed, 14.56 over cross
slide
Distance between centers: 30.9"
bar capacity/spindle bore: 3.05"
Spindle nose: A2-8
Speeds: HI-Low gear drive 30-3500 rpm
Spindle motor: 25/15HP
Tools in turret:12
cross travel X axis: 11.42"
Logitudinal Z travel: 25.59"
rapid traverse: X:15M/PM,Z:18M/PM
tailstock travel: 23.62"
Quill travel: 3.94"
tailstock taper: 5MT
bed incline: 45 deg
chip conveyor
no tool setter probe
Note: only issue known is turret only indexes
in reverse needs new solenoid for turret have
part-just not put on yet.
Run/cut time hrs as of 9-9-13: 3178..total on
time hrs: 15,406
manuals included |
|
| Ad # 8851 | Turning Center 4 - 10 in. chuck |
| 2003 |
Takahashi |
TNC-L-T1 |
Good |
sold |
Photo /
More Info. |
| 6" Chuck: Maximum Machining Diameter 6"
Maximum Bar Diameter 1.5"
Maximum Z Axis Turning Length 6"
Spindle Speeds 60-8000RPM
Tool Capacity 8 Station
Spindle Drive Motor 7.5HP
Equipped With 6" Thru Hole Hydraulic Chuck
Coolant System
Manual Barfeeder
|
|
| Ad # 8848 | Turning Center 4 - 10 in. chuck |
| 1998 |
Okuma |
LU15BB |
— |
sold |
Photo /
More Info. |
| 8" Chuck: 7 Axis Two Spindle/Two Turret CNC Lathe With Milling
OSP 5020L CNC Control
Swing Over Bed 25.59"
Swing Over Carriage 9.84"
Distance Between Centers 57"
Max Turning Diameter X Length 11.81" x 11.81"
Spindle Diamter 4.72"
Spindle nose JIS A2-8
Taper Hole 3.54"
Through Spindle Hole 3.15"
No of Spindle Speed Ranges 2
Spindle Speeds 38-3800 RPM
X Axis Travel Cross Slide 10.43"
Upper and Lower Turret
Feed Rate .00001"-39.37 IPR
Rapid Feedrate 944.89"
Z Axis Carriage Travel (A) 22.4"
(B) 44.88"
(C) 22.44"
Feedrate .00001"-39.37 IPR
Rapid Feedrate 944.89"
C Axis Controllable Angle .001 Degrees
Rapid Feed Rate 200 RPM
Turret Type V12 + V12
Number of Tools on Each Turret 12
Tool Size OD Turning 1"
ID Turning 1 1/2"
M Tool Spindle Speed 35-3000 RPM
Max Tool Shank Diameter 1"
Spindle Drive Motor 30/20 HP
Cross Slide Feed Motor X Axis 5.3 HP
Carriage Feed Z Axis 5.3 HP
M Tool 5/3 HP
Hydraulic Power Unit 5 HP
Lube Pump .033 HP
Coolant Pumps .33 HP (2)
Equipped With Chip Conveyor
Coolant Tanks
LNS Bar Feeder
|
|
| Ad # 8853 | Turning Center 4 - 10 in. chuck |
| 1989 |
Tsugami |
FA45 |
Good |
sold |
Photo /
More Info. |
| 8" Chuck: Collet Capacity 1.5"
Chuck Size 8" (optional)
Chuckable Diameter X1: 160 MM
Z1: 400 MM
Y: +/- 50 MM
X2: 110 MM
Z2: 150 MM
Rapid Traverse Speeds X1 & X2: 8m/min
Z1 & Z2: 10m/min
Y: 6m/min
C: 20 RPM
Main Spindle Speeds (High Speed Version ) 50-
5000 RPM
(Low Speed Version) 40-3,550 RPM
Maximum Cutting Torque (High Speed Version)
8.77 kgf-m/1,666 RPM
(Low Speed Version) 12.33 kgf-m/1,183 RPM
Tool Sizes (For OD Machining) 20 x115mm
For ID Machining) 25 mm (diameter)
Motors (Main Spindle) 15/11 kw
(Tool Spindles) 3.7/2.2 kw
(Hydraulic System) 1.5 kw
(Coolant System) 370 W
NC Specifications:
Type of NC System Fanuc Series OT Model A (2
Units)
No. of Controlles Axes 6 (X1, X2, Y, Z1, Z2 & C)
Minimum setting increments for all axes except C
Axis
(Diametrical Designation for X Axis) 0.001 mm
For C Axis 0.001 deg
Tape Codes EIA RS-244 & ISP 840
(Automatic Discrimination)
Rapid Traverse Speed X Axis 8m/min
Y Axis 6m/min
Z Axis 10m/min
Caxis 7200deg/min(20 RPM)
Equipped With Fanuc OT CNC Controls
Iemca Magazine Load Bar Feeder TAL65/12 AML
Splash Guards
Coolant
Chip Conveyor, Sub Spindle, Transformer
|
|
| Ad # 8852 | Turning Center 4 - 10 in. chuck |
| 2002 |
Topper |
HS-20-6T |
Good |
sold |
Photo /
More Info. |
| 8" Chuck: Fanuc 18T
8” Kitagawa Chuck- Main Spindle
12 Station Main Turret
6 Station Sub Turret
Parts Catcher & Conveyor
Topper BG-1200 Barfeeder (4' Bars)
Chip Conveyor
Swing Over Bed 19.689"
Swing Over Saddle 10.63"
Turning Diameter 9.84"
Turning Length 15.75"
Bar Size 2"
Cutting Feed 0.001-500
Motor HP 15
Nose A2-6
Speed 45-4500 RPM
Travel X Axis 7.48"
Rapid Traverse X Axis 1181 IPM
Servo Motor Power X Axis 1
Travel Z Axis 15.75"
Servo Motor Power Z Axis 1
Rapid Traverse Z Axis 1181 IPM
Turret Type V12
Max Round Shank 1.26"
Max Square Shank .098"
Sub Turret Type Elec V6
Coolant Motor Power 180w
|
|
| Ad # 12675 | Turning Center 4 - 10 in. chuck |
| 1984 |
Pratt&Whitney |
TurnMate |
Good |
sold |
Photo /
More Info. |
| 6" chuck: Machine in excellent condition for it's age
6"-3 jaw air operated
thru hole 1-3/4"
swing: 12"
120 hrs control time
chucker
rigging/loading fee:$500.00
fanuc 6T control
sliding headstock |
|
| Ad # 8832 | Turning Center 4 - 10 in. chuck |
| 1989 |
Mazak |
QT10U |
Good |
Sold |
Photo /
More Info. |
| 8" Chuck: Swing Over Bed 18"
Maximum Cutting Diameter 11.5"
Maximum Diameter Bar 1.875"
Chuck Size 8" Hydraulic
X Axis Travel 6.875"
Z Axis Travel 19"
Rapid Traverse X/Z 707/945 IPM
Spindle Nose A2-6"
Spindle Bore 2.44"
Spindle Speed 30-4000 RPM
Spindle Motor 15 HP
Spindle Torque 188 ft/lbs
Turret Type 8 Pso Drum
Equipped With Conversational Programming
Color Graphics
Automatic Tool Eye
8" 3 Jaw Hyd chuck
All Available Manuals/Tools
|
|
| Ad # 8822 | Turning Center 4 - 10 in. chuck |
| 2004 |
Hitachi-Seiki |
HT200 |
Good |
sold |
Photo /
More Info. |
| 8" chuck: Bar Capacity 2.55"
Swing Over Bed 26.77"
Max Turning Diameter 19.68"
Max Turning Length 19.68"
Capacity (Depth of Cut)
OD Turning 0.23 x.0.017 / Rev
Facing 0.196 x 0.019 / Rev
OD Grooving 0.275 x 0.004 / Rev
Face Grooving 0.236 x 0.004 / Rev
Drilling 1 1/4 x 0.013 / Rev
Spindle Speeds (Stepless) 50-5000 RPM
Spindle Bore 2.9"
Spindle Nose A2-6
Main Bearing ID 4.72"
Turret Positions 12
Turning Tool Diameter 25/40
Turret Travel
X-Axis 10.23
Z-Axis 20.47
Rapid Traverse 1574" Per Minute
Tail Stock Traverse Speed 590" Per Minute
Cuck Outer Diameter 8.26
Spindle Drive Motor 12MW
Equipped With Siecos PC Flexi CNC Control
10,000 Meter Memory
Q-Setter
High Speed One Touch NC Tailstock
Flood Coolant
Hydraulic Hollow Chuck
Chip Conveyor
Eco-Pack Self Lubricating for
Ball/Screws/Guideways
|
|
| Ad # 8812 | Turning Center 4 - 10 in. chuck |
| 1996 |
FMCO |
HL-25 |
Good |
sold |
Photo /
More Info. |
| 8"chuck: Max Turning Length 23.6"
Max Swing Over Bed 17.70"
Standard Turning Diameter 9.8"
Distance Between Centers 25.5"
Spindle Speed 40-4800 RPM
Spindle Nose A2-6
Hole Through Spindle 2.4"
Bar Capacity 2.04"
Chuck Diameter Standard 8.0"
Spindle Power 20/15 HP
Number of Stations 12
Rapid Traverse X Axis 787 IPM
Rapid Traverse Z Axis 787 IPM
Quill Diameter 3.0"
Quill travel 3.9"
Spindle Taper MT # 4
Equipped With Chip Conveyor
Tailstock
|
|
| Ad # 8815 | Turning Center 4 - 10 in. chuck |
| 2004 |
HAAS |
SL-20TB |
Good |
Sold |
Photo /
More Info. |
| 10" chuck: Lathe Tool Presetter
Chip Auger System
Floppy Disk Drive 3.5"
Visual Quick Code Programming System
1 Megabyte Programming Memory
High-Intensity Lighting
Bar Feed Interface
Spindle Orientation
Parts Catcher
2.5" Big Bore Option
Fully Programmable Tailstock
High Pressure Coolant 300 PSI
Auxillary Coolant Filter System 25 Microns
Servo 300 Barfeeder
1.5" Spindle Liner
ATS S26 Collet Chuck for Big Bore
|
|
| Ad # 8825 | Turning Center 4 - 10 in. chuck |
| 1997 |
Index |
V200-T |
Good |
Sold |
Photo /
More Info. |
| 6" chuck: Max Swing Diameter 10.5"
Max Turning Length 7.87"
Tool Table Dimensions Lx W 41.5" x 15.75"
Travels: X-Axis Travel 20.47"
Z-Axis Travel 7.87"
Spindle Through Capacity 2.3"
Spindle Speed Range 0-5,000 RPM
Rapid Traverse 1181 IPM @ 30 MPM
Chuck Actuator Stroke 1.26"
Chuck Size 6"
Spindle Motor 27 HP
Equipped With:
Siemens C200-4 CNC Control
Inboard Parts Conveyor
Auto Loader for Spindle #1
Auto Turn Around Device Btwn Spindle #1 & #2
Auto Loader for Spindle #2
Outboard Parts Conveyor
Misc OCD & ID Holders
Coolant Fed Holders
Special Part Locater
|
|
| Ad # 8819 | Turning Center 4 - 10 in. chuck |
| 1993 |
Hardinge |
Conquest 42 |
Good |
sold |
Photo /
More Info. |
| 8" chuck: Swing Over Upper Way Cover 19.5"
Swing Over Lower Way Cover 14.5"
Max Turning Diameter 9.1"
Hole Through Spindle 1.875"
16C Collet Through Capacity 1.625"
Max Power Chuck Size 8"
Spindle Orient For Live Tooling 1 Degree
Spindle RPM Range 50-5000
Turret (Live Tooling) 10 Station V Turret
Live Tool Holders Max RPM 4000
Max HP at Tool Tip 1.2 HP
Equipped With Fanuc OT-C Control
Hydraulic/Programmable Tailstock
SMW 12' Hydraulic Barfeed
Coolant System/Chip Pan
16C Collet Chuck With Misc. Collets
Various 3/4" Shank Turning Toolholders
4 Live Toolholders
Various ID Toolholders
|
|
| Ad # 8826 | Turning Center 4 - 10 in. chuck |
| 2003 |
Kia Kiatrun |
21 |
Good |
sold |
Photo /
More Info. |
| 8" chuck: Chuck 8"
Turning Diameter 13.8"
Swing 21.6"
Distance Between Centers 16.1"
Motor 15 HP
Spindle Speed 4,000 RPM
Chuck Size 8"
Bar Capacity 2"
Equipped With:
Fanuc OiT Control / CRT
Turb Systems Chip Conveyor
Tool Setter
Parts Catcher
Programmable Tailstock
|
|
| Ad # 6617 | Turning Center 4 - 10 in. chuck |
| — |
JONES & LAMSON |
4512 |
Needs Work |
sold |
Photo /
More Info. |
| JONES & LAMSON MODEL 4512 COMBI CNC LATHE: JONES & LAMSON MODEL 4512 COMBI CNC LATHE
MAXIMUM BAR SIZE: 4-1/2"
MAXIMUM SWING: 22"
SWING OVER CROSS SLIDE: 12-1/2"
LONGITUDINAL TRAVEL (Z-AXIS): 18"
CROSS TRAVEL (X-AXIS): 14"
MAX. DISTANCE SPINDLE TO TURRET FACE: 31"
TOOL POSITIONS: 12
TYPE OF TURRETS: END & SIDE
SPINDLE NOSE: B-1-11"
HOLE THRU SPINDLE: 5-1/4"
SPINDLE SPEEDS: (VAR.) 20 TO 1200 RPM
FEED RATES: (VAR.) .01 TO 300 IPM
RAPID TRAVERSE RATE: 300 IPM
MOTOR: 40 HP
EQUIPPED WITH:
FANUC OT CNC CONTROL
COOLANT
SPLASH/CHIP GUARDS
NOTE - MACHINE REMANUFACTURED AND RETROFIT WITH FANUC OT CNC CONTROL IN 2002.
no manuals
needs work |
|
| Ad # 3264 | Turning Center 4 - 10 in. chuck |
| 1984 |
Hardinge |
CHNC |
Fair |
sold |
Photo /
More Info. |
| Hardinge CHNC Lathe chucker turret lathe: Control: AB Series 7300,7370
3-8Kw motors
8 Position Turret on tailtock slide
Cut off Tool attachment
bar capacity: 1-3/4"
14" Swing over ways
|
|
| Ad # 8761 | Turning Center 4 - 10 in. chuck |
| 2005 |
Akira-Seiki |
SL15 |
Good |
sold |
Photo /
More Info. |
| 5 Collet: Fanuc OTC Deluxe Control
Maximum Swing Over Bed 16"
Maximum Turning Diameter 9"
Maximum Travel in X Axis 5"
Maximum Turning Length
Headstock Spindle Motor Direct Drive/ HI Torqu
15HP
Spindle RPM 20-6,000
Collet/Nose Internal Taper A2-5
Bar Capacity 1.77"
Turret Number of Stations 10 Each
Turning Tool Size (Square Shank) 3/4"
Maximum Boring Bar Size 1"
Equipped With Hydraulic Power Unit
Automatic Lubrication System
Chip Conveyor
Parts Catcher
|
|
| Ad # 1236 | Turning Center 4 - 10 in. chuck |
| 1992 |
YCI/Supermax |
TCM-TC-2 |
Like New |
Sold |
Photo /
More Info. |
| LIKE NEW - LOW HOURS: Fanuc ser O-T, All Options, RS232, All Manuals, Chip Conveyor, Hyd Chuck Cl... |
|
| Ad # 8760 | Turning Center 4 - 10 in. chuck |
| 2005 |
Akira-Seiki |
SL15 |
Good |
sold |
Photo /
More Info. |
| 5 Collet: Fanuc OTC Deluxe Control
Maximum Swing Over Bed 16"
Maximum Turning Diameter 9"
Maximum Travel in X Axis 5"
Maximum Turning Length
Headstock Spindle Motor Direct Drive/ HI Torqu
15HP
Spindle RPM 20-6,000
Collet/Nose Internal Taper A2-5
Bar Capacity 1.77"
Turret Number of Stations 10 Each
Turning Tool Size (Square Shank) 3/4"
Maximum Boring Bar Size 1"
Equipped With Hydraulic Power Unit
Automatic Lubrication System
Dhip Conveyor
Parts Catcher
IEMCA 12' Barfeeder
|
|
| Ad # 14768 | Turning Center 4 - 10 in. chuck |
| 1996 |
Perkasa |
TP 150 |
Good |
sold |
Photo /
More Info. |
| 5" x 25": 1996 Perkasa TP 150
control: Fanuc Series 0-TD
travels: 5" x 25"
8 station Tool Turret
Tailstock
5 C Collet Closer shown
3-Jaw Chuck comes with it..
Wired 440 volt
Taken out of service |
|
| Ad # 9648 | Turning Center 4 - 10 in. chuck |
| 1998 |
HAAS |
HL-2 |
Good |
Sold |
Photo /
More Info. |
| 10 in chuck: Std. machine specs-verify...below
Swing Over Front Apron: 20"
Swing Over Cross Slide: 9.5"
Chuck Size: 8"
Bar Capacity: 2" Max.
Distance Between Centers: 24"
Max. Cutting Diameter: 10"
Max. Cutting Length: 20"
Spinde Speed: 3750 RPM Max.
Spinde Motor: 15 HP Peak
Spindle Bore: 3"
Draw Tube Bore: 2.06"
X-Axis Travel: 8.45"
Z-Axis Travel: 20"
Tailstock Taper: MT4
Tailstock Travel: 20"
10 Station Turret-Style Tool Changer w/tool holders
Electrics: 208/3
Approx. Weight: 9000 lbs.
options on machine-below
10 station turret
ridgid tapping
hydr.tail stock
tool preset eye
10" 3 jaw chuck
thru turret cooling
foot pedals chuck/tailstock
4th axis pre-wired
threading turret
new belts and motors - rebuilt extensivley
6332 cutting hours
Tool eye pre-setter needs repair , all else good |
|
| Ad # 13484 | Turning Center 4 - 10 in. chuck |
| 1980 |
Mazak |
Slant 15 |
Excellent |
sold |
Photo /
More Info. |
| CNC Lathe Mazak Slant 15 : 1980 Mazak Slant 15 CNC Lathe Fanuc 6TA Control
Machine has a serial port to send programs from computer to the machine,
Machine is still quite accurate.
8" Manual chuck
8"Hydraulic chuck
2.2" bore
Grooving tooling
MAX SWING 15"
MAX DIAMETER SHAFT WORK 8 1/4"
MAX BETWEEN CENTERS 42"
SPINDLE BORE 2.2"
SPINDLE SPEED RANGE 15 TO 3000 RPM VARIABLE
TURRET POSITIONS 10
MAIN DRIVE MOTOR 15 HP DC
APPROX WEIGHT 9300 LB
|
|
| Ad # 14751 | Turning Center 4 - 10 in. chuck |
| 1990 |
Okuma & Howa |
Act 3 |
Good |
sold |
Photo /
More Info. |
| 8" Chuck : Okuma & Howa
Act 3
Fanuc System 3 T
Swing 18"
8" x 23" over carriage
Tailstock
10 tool Changer
2" Spindle Bore |
|
| Ad # 14750 | Turning Center 4 - 10 in. chuck |
| 1990 |
Okuma & Howa |
Act 3 |
Good |
sold |
Photo /
More Info. |
| 10" chuck 8" x 23": Okuma & Howa
Act 3
Fanuc System 11 T
Swing 18"
8" x 23" over carriage
Tailstock
10 tool Changer
2" Spindle Bore |
|
current group
groups previously viewed
groups not yet viewed
