| Year |
Make |
Model |
Condition |
Price |
Details |
|
| Ad # 7083 | Turning Center 11 in. & over chuck |
| 1997 |
POREBA |
TRP-93N |
Very Good |
SOLD |
Photo /
More Info. |
| One (1) 1997 POREBA TRP-93N: One (1) 1997 POREBA TRP-93N
Swing Over Guideways 36.6"
Swing Over Saddle 21.6"
Distance Between Centers 118"
Workpiece Weight, In Chuck 1,800 lbs
Workpeice Weight Between Centers 10,000 lbs
Headstock Spindle Spped Range Infinitley Variable 1 to 350 RPM
Number of Ranges 2
Spindle Nose A1-20
Front Bearing 14.75"
Spindle Bore 12.50"
Main Drive 40 HP Continuous 49 HP (50% Duty Cycle)
Cross Slide Travel X Axis 21.5"
Working Geed Range Axis X .0001-9.8
Working Feed Range Axis Z .0001-9.8
Rapid Travel Z Axis 157 IPM
Rapid Travel X Aixs 157 IPM
Feed Thrust Z Aixs 5,500 Lbs
Ball Screw X Axis 1.57"
Ball Screw Z Axis 2.5"
Carriage Length Bearing on Bedways 27.5"
Width of Cross Slideways 9.8"
Eight Position Sauter Tool Turret, Sauter 8 Pos Disk Turret Model 0.5.480.52
Tool Size ACC to VDI3425 50 MM
Max Permissible Cutting Torque at Radial Tool Overhang of 12.5": 53,000
Admissible Feed Force (Axis Z) 44,000 LBF
Swivel time for 180 deg Index 3.0 Sec
Indexing Precision (+/-) 4.0
Repetitive Precision (+/-) 1.6
Tailstock Quill Diameter (Taper) 5.11 (MT6)
Quill Travel 11.80"
Two Speed Quill Movement 1:1 & 1:5
Tailstock Set Off (+/-).6"
Width of Bed 23.00" |
|
| Ad # 7059 | Turning Center 11 in. & over chuck |
| 1982 |
HES |
600 |
Very Good |
Sold |
Photo /
More Info. |
| One (1) 1982 HES 600: One (1) 1982 HES 600
Fanuc 6T Control
40 HP Option
12 Position Turret
15" Chuck
A1-8 Spindle
New Bearing Z Axis
30 Deg Slant Bed
Auto Lube System
3 Speed Headstock Automatic
Hydraulic Tailstock # 4 Taper
Swing Over Bed 24"
Swing Over Cross Slide 12 1/2"
Distance Between Centers 122"
3" Bore
Z Axis Travel 66"
X Axis Travel 14 3/4
Rapid 320 IPM |
|
| Ad # 2284 | Turning Center 11 in. & over chuck |
| 1979 |
IKEGAI |
FX25N |
Very Good |
sold |
Photo /
More Info. |
| IKEGAI FX25N CNC TURNING CENTER: BUILT 1979
FANUC CONTROL
10 & 12" HYDRAULIC CHUCKS
25" SWING
8 STATION TOOL TURRET
LOTS OF TOOLING
LOOKS & RUNS VERY GOOD
HOLDS TOLERANCES VERY GOOD
SHOP READY! |
|
| Ad # 14898 | Turning Center 11 in. & over chuck |
| 1995 |
Daewoo |
Puma-12L-C |
Good |
sold |
Photo /
More Info. |
| 16" hyd.chuck: 1995 Daewoo Puma 12L-C turning center
DAEWOO PUMA 12LC
3 jaw chuck-16"
Control:FANUC O-T,
5.1" SPINDLE BORE,
40" TURNING LENGTH,
TAILSTOCK,
CHIP conveyor
Std Mfg specs below-please verify actual machine
Chuck Size: 16.5"
Max Diameter Bar Capacity: 5.2"
Max Swing Over Bed / Carriage: 22.4" / 14.6"
Max Turning Diameter: 19"
Max Machining Length: 40.2"
Spindle Speed: 20 - 2000 RPM
Spindle Bore: 5.2"
Spindle Nose: A2-11
Spindle Motor: 35 / 30 HP
Spindle Torque: 1009 ft. lbs.
Tools: 12
Rapid Traverse Rates (X / Z): 480 / 630 IPM
X-Axis Travel: 10.2"
Z-Axis Travel: 41.3"
Tailstock Taper: MT#5
Machine Dimensions (L x W x H): 141" x 87" x 89"
Machine Weight: 17,380 lbs.
FEATURES:
FANUC O-T CNC CONTROL
9" Monochrome CRT
3-Jaw Chuck
5.2" Dia. Big Bore Spindle
Tailstock
Two Gear Range Headstock
Slant Bed Box Way Construction
|
|
| Ad # 13707 | Turning Center 11 in. & over chuck |
| 1992 |
Okuma |
LC 30 |
Good |
sold |
Photo /
More Info. |
| 12" Chuck: Okuma LC 30
OSP 5000-L Control
Tail stock
RPM 3000 Max
3" Spindle Bore
12" Chuck included (not shown in pictures)
Swing: 19.69 in Max
Centers:38.58 in
|
|
| Ad # 5474 | Turning Center 11 in. & over chuck |
| 1995 |
Niles-Simmons |
N41-1 |
Good |
SOLD |
Photo /
More Info. |
| 38.78” X 130” Turning Length Niles-Simmons Model N41-1 CNC Slant Bed C: Swing over bed:------------38.78”
Swing over cross slide:----35.44”
Turning length:------------130”
Working Height:------------49.22”
Max Turning diameter:------35.44”
Travel of cross slide:-----23.23”
Travel of longitudinal slide:--49.61”
Spindle nose: ------------ A 15
Diameter of front antifriction bearing:-- 11.03”
Spindle bore:------------- 8.19”
Chuck diameter-Hydraulic:-- 25”
Steady Rests:------- (2) Large programmable
Max workpiece weight between centers:- 13,300 lbs
Max workpiece weight/chuck:----- 750 kg
Tailstock:--- Yes
Programmable tailstock:-- Yes
Main drive:-- dc@100%..63kw, dc@60%...76kW
Speed range:------ 4-1620 RPM
Max torque:---- dc@ 60%...6050Nm
Sauter tool changer:--- 12 positions
· Locating diameter:----------60mm
· Indexing time over 1/6 positions 2/4
· Main cutting force:---- 35kN
· Hole-circle diameter:---- 815mm
· Diameter of tool rotation, max: -- 1180mm |
|
| Ad # 11654 | Turning Center 11 in. & over chuck |
| 1984 |
Monarch/Sydney |
TC1 |
Very Good |
sold |
Photo /
More Info. |
| 16" x 24": Monarch/Sydney TC-1
16" x 17"
12" Chuck
25Hp
50-2500 Rpm
8 Tool Turret Holder OD
6 Tool Turret Holder ID
3"- 1/16" Spindle Bore
GE MarkCentury 2000 Controll
|
|
| Ad # 1407 | Turning Center 11 in. & over chuck |
| — |
OKUMA |
LAW-S 4-Axis Lathes |
Good |
sold |
Photo /
More Info. |
| OKUMA 4-Axis LAW-S Turnining Centers: Swing Over Bed: 24.4"
Max Turning Dia.: 24.4"
Max turning Length: 11"
Spindle Nose: 2-8
Spindle Bore: 3.54"
Spindle HP: 75/60 hp
*No tooling included |
|
| Ad # 10737 | Turning Center 11 in. & over chuck |
| — |
Mazak |
QS-30 |
Good |
sold |
Photo /
More Info. |
| 12" Chuck: QS-30 MAZAK CNC Lathe
Mazak CNC lathe
Machine features a 12 inch chuck and has a 40" center to center
|
|
| Ad # 10736 | Turning Center 11 in. & over chuck |
| 1989 |
Mazak |
QT 15 |
Good |
sold |
Photo /
More Info. |
| collet lathe: Mazak Quickturn 15 CNC lathe nice machine is in
has a collet chuck, no 3 jaw
have collet sleeves
only cut plastic
New: 1989
Mazatrol Cam T-2 CNC Control
17.3" Max. Swing
20" Max. Centers
2.0" Capacity
15 HP
5,000 RPM
8 Position Tool Turret
|
|
| Ad # 14312 | Turning Center 11 in. & over chuck |
| — |
yang |
ck-5a |
Excellent |
sold |
Photo /
More Info. |
| —: YANG MODEL CK5A 20'' X 36'' CNC TURNING CENTER
15'' 3-JAW CHUCK,
2.5'' BORE,
TAILSTOCK,
8 POSITION TURRET,
SPINDLE SPEEDS TO 1000RPM,
CHIP CONVEYOR,
FANUC O-T CNC CONTROLS |
|
| Ad # 14801 | Turning Center 11 in. & over chuck |
| 1990 |
Okuma |
LC20 4axis simulturn |
Good |
sold |
Photo /
More Info. |
| Dual Turret!!:
1-OKUMA LC20 4 AXIS CNC LATHE
SERIAL NUMBER
APPROX. DATE OF Manufacture :
========================================
SPECIFICATIONS SUBJECT TO VERIFICATION:
std mfg.SPECIFICATIONS:below
SWING OVER BED 15.74"MAX.
TURN DIA. x MAX. WORK LENGTH 11.81"x 29.52"
SPINDLE BORE ..... 2.04"
SPINDLE NOSE ....... A2-6
SPINDLE SPEED RANGE .... 65-3500 RPM
LONGITUDINAL TRAVEL, UPPER ... 30.3"
LONGITUDINAL TRAVEL, LOWER 23.58"
CROSS SLIDE TRAVEL, UPPER . 6.49"
CROSS SLIDE TRAVEL, LOWER 4.52"
RAPID TRAVERSE X/Z - 196/393 IPM
NUMBER OF TOOL STATIONS . 8 + 8
TAILSTOCK QUILL STROKE 5.9"
TAILSTOCK TAPER MT#5
MAIN SPINDLE MOTOR DC 15/22 kw
APPROX WEIGHT 14,300 LBS.
EQUIPPED WITH:
- OSP 5000L-G CONTROL w/IGF
- HYDRAULIC COLLET CHUCK
- 8 POSITION UPPER & LOWER TURRETS
- TAILSTOCK
- CHIP CONVEYOR
no tooling
you can turn and bore at same time on this machine! |
|
| Ad # 12710 | Turning Center 11 in. & over chuck |
| 1990 |
Doosan Deawoo |
Pan 20 |
Good |
sold |
Photo /
More Info. |
| 24" Swing X 60" Length: Doosan Deawoo pan 20 lathe
Fanuc 10T Control
15 HP Spindle motor
New coolant tank and pumps
Dual Turret with six front tools and four rear
tools
machine runs good |
|
| Ad # 8842 | Turning Center 11 in. & over chuck |
| 1985 |
Mori Seiki |
SL-8F |
Good |
Sold |
Photo /
More Info. |
| 32" Chuck: Max Swing 51.1"
Max Machining Diameter 51.1"
Spindle Bore 8.5"
Spindle Nose A2-15
Spindle Speeds (3Gear Range) 1-143 RPM
Turret Position 6
Spindle Motor 40HP (AC)
Equipped With
Fanuc OT
32" Manual Chuck
Misc. Tool Holders
Chip Conveyor
|
|
| Ad # 6643 | Turning Center 11 in. & over chuck |
| 1991 |
NAKAMURA TOME METHODS |
SL-3B |
Excellent |
Sold |
Photo /
More Info. |
| NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center: NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Max. swing over door 22.05”
Max. swing over slide cover 27.17”
Max. swing over bed 31.1”
Max. swing over cross slide 18.9”
Max. turning diameter 15.75”
Max. turning length 21.26”
Max. distance between spindle nose and turret face 30.31”
Min. distance between spindle nose and turret face 7.48”
Hole through Spindle 3.15”
Spindle nose A1-8
Hole through draw tube 2.56”
Round collet capacity 2.50”
Spindle speed range 10 to 3500 RPM
X-axis travel 10.83”
Z-axis travel 22.83”
X-axis rapid traverse rate 395 IPM
Z-axis rapid traverse rate 590 IPM
Tailstock quill center size No.3 M.T.
Tailstock quill stroke 3.94”
Tailstock quill diameter 3.54”
EQUIPPED WITH:
12” Dia. 3-jaw power chuck
Tailstock with built-in live center
12-Station turret with large amount of holders
Tool eye arm
Automatic chip conveyor
Work light
Flood coolant system
25 H.P. Spindle drive Motor
Fanuc 11T-A Control, Swivel pendant mount, Color CRT, RS232 port |
|
| Ad # 6644 | Turning Center 11 in. & over chuck |
| 1992 |
NAKAMURA TOME METHODS |
SL-3B |
Excellent |
Sold |
Photo /
More Info. |
| NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center: NAKAMURA TOME METHODS Slant SL-3B 2-axes CNC Turning Center
Max. swing over door 22.05”
Max. swing over slide cover 27.17”
Max. swing over bed 31.1”
Max. swing over cross slide 18.9”
Max. turning diameter 15.75”
Max. turning length 21.26”
Max. distance between spindle nose and turret face 30.31”
Min. distance between spindle nose and turret face 7.48”
Hole through Spindle 3.15”
Spindle nose A1-8
Hole through draw tube 2.56”
Round collet capacity 2.50”
Spindle speed range 10 to 3500 RPM
X-axis travel 10.83”
Z-axis travel 22.83”
X-axis rapid traverse rate 395 IPM
Z-axis rapid traverse rate 590 IPM
Tailstock quill center size No.3 M.T.
Tailstock quill stroke 3.94”
Tailstock quill diameter 3.54”
EQUIPPED WITH:
12” Dia. 3-jaw power chuck
Tailstock with built-in live center
12-Station turret with large amount of holders
Tool eye arm
Automatic chip conveyor
Work light
Flood coolant system
25 H.P. Spindle drive Motor
Fanuc 11T-A Control, Swivel pendant mount, Color CRT, RS232 port |
|
| Ad # 8762 | Turning Center 11 in. & over chuck |
| 1993 |
Amera Seikii |
TC-4LS |
Good |
sold |
Photo /
More Info. |
| 12" and 6": Fanuc OTC Control
3" Bar Capacity
13" Turning Diameter
23.6" Turning Length
30-3000 RPM Spindle Speed
40 HP AC Main Spindle Motor (Max Rating)
15 HP AC Sub Spindle Motor
12 Station Turret
Programmable Sub Spindle
Main and Sub Spindle Orientation
Turret Coolant System
High Intensity Work Light
Cycle Stop Alarm Light
Set of Amera Seiki Tool Holders
12" Kitagawa 3 Jaw Hydraulic Chuck (Main Spindle)
6" Kitagawa 3 Jaw Hydraulic Chuck (Sub Spindle)
Chip Conveyor
Parts Catcher
|
|
| Ad # 5229 | Turning Center 11 in. & over chuck |
| 1995 est |
Mazak |
M-5N |
Very Good |
SOLD |
Photo /
More Info. |
| MAZAK M-5N LARGE BORE FLAT BED CNC TURNING CENTER: MAXIMUM SWING 24.00"
MAXIMUM SWING OVER CROSS SLIDE 13.00"
MAXIMUM CUTTING LENGTH 80.00"
SPINDLE NOSE A2-15
SPINDLE BORE 6.50"
SPINDLE SPEED RANGE 6 - 1,300 RPM
MAIN MOTOR 30 HP
TURRET POSITIONS 14 (8 + 6)
X AXIS TRAVEL 22.00"
Z AXIS TRAVEL 80.90"
RAPID TRAVERSE X/Z 394 IPM
TAILSTOCK QUILL DIAMETER 3.90"
TAILSTOCK QUILL TRAVEL 5.10"
TAILSTOCK CENTER MT # 5
MAZATROL T--PLUS CONVERSATIONAL CNC CONTROL
RS-232C PORT INTERFACE FOR DNC OPERATION
19.5" 3-JAW SMW AIR CHUCK WITH 8" THROUGH HOLE
STEADY REST, (2) TURRETS, HYDRAULIC TAILSTOCK
FULLY ENCLOSED SPLASH & SAFETY GUARDING
STANDARD COOLANT SYSTEM WITH TANK & PUMP
ALL AVAILABLE TOOL HOLDERS & MANUALS |
|
| Ad # 12607 | Turning Center 11 in. & over chuck |
| 1996 |
Monarch |
TC-3 |
Good |
sold |
Photo /
More Info. |
| 28" Swing: Monarch TC-3
28" Swing
Voltage 480
Allen Bradley 9 series control
10 Tool Turret |
|
| Ad # 3152 | Turning Center 11 in. & over chuck |
| 1987 |
St. Etienne |
#H-1152N |
Excellent |
sold |
Photo /
More Info. |
| ST. ETIENNE CNC LATHE: MACHINE SPECIFICATIONS:
Swing Over Bed 45"
Swing over Cross Slides 26"
Distance Between Centers 13'(160")
Main Motor Drive 80 HP
Spindle Speeds 4 to 800 RPM
Hole In Spindle 4.5"
Max. Workpiece Weight w/2 steadies 38,200 lbs.
EQUIPPED WITH:
* 25" 3 Jaw Chuck
* 30" 4 Jaw Chuck
* 39" 4 Jaw Faceplate Chuck
* (5) Steady Rests
* Chip Conveyor
* Coolant System
* CNC Programable Quill On Tailstock
* Heavy Duty 4 Way CNC Controlled Toolpost
|
|
| Ad # 5164 | Turning Center 11 in. & over chuck |
| Dec 81 |
MORI SEIKI |
SL8-A |
Good |
Sold |
Photo /
More Info. |
| 39" swing x 43" Long Slant Bed Mori Seiki With 26" Chuck: SWING OVER BED.........................39.3"
MAX. LONGITUDINAL TRAVEL (Z AXIS)......43.3"
MAX. CROSS TRAVEL (X AXIS).............16.5"
BED WIDTH..............................27.5"
SLANT BED INCLINATION..................60 DEGREE
HOLE THRU SPINDLE......................8 1/2"
SPINDLE SPEEDS.(4 RANGES)..........4 TO 750 RPM
TURRET HEAD............................6 SIDED
MAIN MOTOR.............................60 HP
EQUIPPED WITH:
* FANUC 6T CNC CONTROL WITH CRT AND RS232 PORT
* CHIP CONVEYOR
* 26" 3-JAW COMBINATION MANUAL CHUCK
|
|
| Ad # 3152 | Turning Center 11 in. & over chuck |
| 1987 |
St. Etienne |
#H-1152N |
Excellent |
sold |
Photo /
More Info. |
| ST. ETIENNE CNC LATHE: MACHINE SPECIFICATIONS:
Swing Over Bed 45"
Swing over Cross Slides 26"
Distance Between Centers 13'(160")
Main Motor Drive 80 HP
Spindle Speeds 4 to 800 RPM
Hole In Spindle 4.5"
Max. Workpiece Weight w/2 steadies 38,200 lbs.
EQUIPPED WITH:
* 25" 3 Jaw Chuck
* 30" 4 Jaw Chuck
* 39" 4 Jaw Faceplate Chuck
* (5) Steady Rests
* Chip Conveyor
* Coolant System
* CNC Programable Quill On Tailstock
* Heavy Duty 4 Way CNC Controlled Toolpost
|
|
| Ad # 5169 | Turning Center 11 in. & over chuck |
| 2000 |
Dainichi |
F-45X2000 |
Very Good |
Sold |
Photo /
More Info. |
| 28 x 82 Dianichi Lathe with 24" Chuck and Fanuc 18T: 2000 Dainichi Model F-45X2000 with Fanuc 18T CapII control and all standard... |
|
| Ad # 5154 | Turning Center 11 in. & over chuck |
| 1984 |
OKUMA |
LH-35N |
Good |
Sold |
Photo /
More Info. |
| OKUMA FLAT BED LATHE WITH 15" CHUCK: 13.78" swing over cross slide
80" centers
15" Hyd Chuck-thru hole
2 Steady rests
Tool holders
2 turrets-(1)-bi directional pin wheel and 1 (4 )way single directional
OSP 3000 control
4 gear ranges 20 to 195, 55 to 510, 90 to 840, 240 to 2200, infinitely variable
30 hp dc motor
|
|
| Ad # 11465 | Turning Center 11 in. & over chuck |
| 2006 |
Okuma |
Captain L-370 M BB |
Excellent |
sold |
Photo /
More Info. |
| 3 Axis Universal W-Milling: Specification Description
Swing Over Bed 20.8"
Max. Turning Diameter 14.56"
Max. Turning Length 20.47"
Spindle Speed Range 3800
Main Motor 30 HP
Spindle Bore Diameter 3.15"
Turret Tool Positions VDI 12 Live Positions
Milling Motor 7.5 HP
C-Axis Indexing .001 degree
Spindle Nose A2-8
Equipped With:
OSP 100L CNC Control
12" Kitagawa Chuck
Chip Conveyor
Misc. Standard Tool Holders
4 Live Tools (2-x / 2-z Axes)
Cutting history ....job shop - mild steel
No IGF function
No 10" jaw chuck just 12" jaw chuck
Approx. 6300 Cutting Hrs
Available Now
|
|
| Ad # 10496 | Turning Center 11 in. & over chuck |
| 2005 |
Okuma |
Captain L-470 |
Good |
Sold |
Photo /
More Info. |
| Okuma Model Captain L-470, 2-Axis CNC Lathe: OKUMA Captain
L470/1250 2-Axis CNC Lathe
has 5,455 cutting hrs as of 4-25-11
NEW:2005
Basic Equipment
SMW 12" Hydraulic Powered 3 Jaw Chuck, Quick Change Jaw 12"
Round Bar Stock Capacity 3.469" Dia
SMW Steady-Rest (.591" min dia to 6.692" max dia)
Tailstock(Quill Stroke w/ MT5 Revolving Center 5.90"
12 Station Turret - I.D. or O.D.)
Coolant Thru Tool Blocks
Chip Conveyor (Jorgensen)
Okuma OSP-E100L CNC Control
Part Envelope
X-Axis (upper/lower) Travel 11.81"
Z-Axis (upper/lower) Travel 50.19"
Maximum Turning Diameter 16.54"
Maximum Turning Length 49.20"
Maximum Swing Over Bed 24.41"
Maximum Turning Length 49.20"
Maximum Swing Over Bed 24.41"
Maximum Swing Over Saddle 18.90"
Maximum Turning Length 49.20"
Maximum Chucking Diameter 10 1/2"
Power and Speed
Spindle Motor 30HP
Spindle Ranges 2(low/high)
Spindle Speeds 50-3,000 RPM (cont)
Tool Holders
Tool Shank O.D. 1" square
Boring Bar Shank 1.50" Dia
Machine Weight 16,720 lbs
Jib Hoist Capacity 4,000 lbs
Coolant Tank Capacity 60 Gallons
|
|
| Ad # 14686 | Turning Center 11 in. & over chuck |
| 2002 |
Johnford |
ST-70A |
Good |
sold |
Photo /
More Info. |
| 19" x 62" w/15" chuck: Johnford ST-70A turning center w/ live tooling
control:Fanuc 18I-T
Specifications:please verify below
specs
• Swing Over Bed 790mm (31.1")
• Swing Over Cross Slide 600mm (23.6")
• Cross Travel (X-Axis )320 (12.6")
• Longitudinal Travel (Z-
Axis)800/1200/1600
(31.5"/47.2"/63")
• Bar Capacity :115mm or 4.5" or 5"
without
tube
• Spindle Nose A2-8
• Spindle Bore 115 8"
• Spindle Speed, Step (s)Auto
• Hi-Lo-4,500 rpm
• Spindle Motor 30hp
• ATC 12
chip conveyor
RS232 port
Note:spindle liners included: 1-1/4 to 3-1/4"
&
tooling pictures w/ some live holders
chuck: 15" 3 jaw A2-8
|
|
| Ad # 14688 | Turning Center 11 in. & over chuck |
| 1985 |
Mazak |
slant turn 30ATC-MC |
Good |
sold |
Photo /
More Info. |
| 20" swing x 60"centers: Mazak slant turn 30ATC Mill Center w/live tooling
Mazatrol T-3 Control,
16 Station Tool changer on turretChanger,
20’ swing,
60” centers,
C-axis,
30 hp main spindle,
5 hp power live tooling spindle
hydraulic 12" 3 jaw chuck
Specifications: std specs below please
verify
actual machine
MAZAK Slant-Turn 30 ATC M/C CNC Turning &
Mill Center
Swing Over Bed 18"
Distance Between Centers 60.6"
Cross Travel, X-Axis 13.2"
Z-Axis Travel 60"
C-Axis .001 Degrees
Tool Positions 16
Rotary Tool Spindle Drive 5 HP
Spindle Nose A2-8"
Spindle Hole Diameter 3.15"
Spindle Hole w/ Draw tube 2.75"
Spindle Speed Range 6-2200 RPM
Spindle Drive Motor 30 HP AC
Milling Spindle 1500 RPM
Milling Spindle Motor 5 HP
Feed Range 1-196 IPM
Rapid Feed Rate 393 IPM
Electrics 440/220/3/60
Approximate Dimensions 189"x74"x96"
Approximate Weight 11, 000 Lbs
EQUIPPED WITH:
Mazatrol T3 3-Axis CNC W/ CRT, Micro
Disk
Storage
12" 3-Jaw Chuck
C-Axis Spindle
Live Tooling For
Milling/Drilling/Tapping
16-Station Tool Changing Turret
Approx. 23 Tools: 6-Milling, 9-Boring,
8-
TurningLinear & Circular Interpolation
Programmable Tailstock W/ Built-In Live
Center
Tool Presetter
All Manuals
Splash Enclosure & Coolant System
Note: lots of live tooling & jaws included-
see
picture..runs great!
|
|
| Ad # 14665 | Turning Center 11 in. & over chuck |
| 2012 |
Okuma |
Multus B200II |
Excellent |
sold |
Photo /
More Info. |
| max turning dia: 23.62": 2012 Okuma Multus B200II turning/milling center
chip auger
bar feed 6ft: lns move 52
high pressure coolant
tooling: capto-C6
control: osp-p3005-H
very low hrs...sold new for 850,000
std machine specs below-please verify:
MULTUS B200II
The MULTUS B200II is the ultimate fusion of
turn-
mill operations, with lathe, vertical or
horizontal machining center and material
handling
operations consolidated into one 6-8 inch chuck
class machine. This multi-tasking CNC machine
performs process-intensive machining for shorter deliveries, while making more effective use of floor space. With fewer setups, work in process is drastically reduced and machine utilization is greatly increased.
The MULTUS B200II has a 225° B-axis range with
12,000 rpm H1-milling spindle (opt. 20,000rpm)
with dual function (L/M). The H-1 dual function
spindle head utilizes CAPTO-C6 tooling and has a
16.2/10.8 hp PREX milling motor spindle. The
base
offering has 40-tool ATC, with a 60-tool ATC
available. The H1-turret has a 0.001 degree B-
axis
and compound motion Y-axis for machining
flexibility. The main spindle is equipped with a
full contouring C-axis.
Thermo-Friendly Construction assures high
accuracy, even in the most complex applications,
and the optional W version with sub-spindle
allows
a part to be handed from one spindle to the
other.
The MULTUS B200II is equipped with Okuma’s
THINC-
OSP P300S control that is designed with ease of
operation in mind. With single-mode operation
and
superior graphics, novice operators as well as
professional machinists will experience a
smoother, more effective way of producing parts.
max turning dia: 23.62"
speed range: 45-5000 rpm
hp:15/10
rapids: 1,575/1024ipm
|
|
| Ad # 6240 | Turning Center 11 in. & over chuck |
| 1997 |
Mazak |
Integrex 50Y/1500 |
Good |
Sold |
Photo /
More Info. |
| Mazak Integrex 50Y/1500 CNC Turning Center: Mazatrol T-Plus
60 ATC
15" Chuck
27.9" Cutting Diameter
60" Bed Length
C-Axis
Tailstock
40 HP Spindle |
|
| Ad # 15230 | Turning Center 11 in. & over chuck |
| 2005 |
Sunfirm-SFM |
CST4280-14A |
Good |
sold |
Photo /
More Info. |
| 36" swing x 12ft bed: 2005 SFM-Sunfirm #CST428014A
14" spindle bore:A2-11
8 tool turret
rpm:1-3500
boring bar dia:2"
quill dia 6"
tailstock:6MT
voltage 220/3
swing: 42" over bed ways,27"over crosslide,55" over gap
30 HP
dist.between centers: 12ft
4 jaw chuck:26" dia
control: Fanuc OITC
chip conveyor
|
|
| Ad # 2948 | Turning Center 11 in. & over chuck |
| 1987 |
NEW BRITIAN |
MD5S |
Good |
sold |
Photo /
More Info. |
| NEW BRITIAN MD5S/ 2 AXIS GILDEMEISTER CNC SLANT BED LATHE: Center Distance: 59"
Max.Swing Over Bed: 22 7/8"
Max. Swing Over Cross Slide: 15 7/8"
Max. Colision Free Diameter: 10.23"
Spindle Bore: 3.18"
Spindle Nose: ASA Direct Bolt On Type Size 8
Max. Driving Power: 28 / 25 KW ( approx. 28 HP)
Spindle Speeds: 28 to 4000 RPM
Spindle Speeds Continuously Programmable for
Constant Cutting Speed
Feed Rates: 0.5 to 5000 MM Per Minute
Rapid Traverse Rate: 10 Meters Per Minute
Travels: Y Axis 9.64", X Axis 59.84"
12 Tool Tool Turret (6 positions for boring tools & 6
positions for turning tools)
Tool Shank Diameter 1.57" with Pinion Rack
(Trudex Type )
Tailstock Quill Diameter 3.93" Quill Stroke 4.72"
Tailstock Taper #4 Morse with Built in Center
Bearing
Tailstock Quill Hydraulic Force with Adjustable
Pressure
|
|
| Ad # 6049 | Turning Center 11 in. & over chuck |
| 1994 |
CINCINNATI MILACRON |
300MT/4-1000 |
Good |
Sold |
Photo /
More Info. |
| CNC Turning Center with Twin Turrets and Live Tooling : CINCINNATI MILACRON 300MT/4-1000 CNC Turning Center with Twin Turrets and L... |
|
| Ad # 12354 | Turning Center 11 in. & over chuck |
| — |
BRIDGEPORT |
EZ PATH |
— |
sold |
Photo /
More Info. |
| —: USE D EZ PATHE UNDER POWER
Control
Swing 16.5" Swing Over Bed
Maximum Turning Diameter
Max Center Distance 40"
X Axis Travel
Z Axis Travel
Spindle Speeds (24) High Range 67-3000 RPM -- Low Range 37.5-1500 RPM
Hole Through Spindle
Turret Configuration Steady Rest, Coolant System
Motor HP
Spindle Nose/Taper ASA A2-5" |
|
| Ad # 8499 | Turning Center 11 in. & over chuck |
| — |
Warner & Swasey |
M-5940 Universal |
Good |
Sold |
Photo /
More Info. |
| 15in x 46in Warner & Swasey CNC Lathe With 12in Chuck: Control: GE/Fanuc GN 6 Series
Swing 15.723"
Swing Over Ways: 32" (for a distance of 16")
Length: 46in (approx)
8 Station Turret
Chuck: 12" Diameter Buck Chuck
Bar Capacity: 3.9
Spindle Power: 15 hp
Hydraulic "Drag-Along" Tailstock
Hydraulic Quill
Chip conveyor
|
|
| Ad # 14067 | Turning Center 11 in. & over chuck |
| 2000 |
Daewoo |
Puma 400b |
Good |
sold |
Photo /
More Info. |
| 18" x 40": Dawoo Puma 400b
SPECS
Bar Capacity:4.62 "
# Axis:2
Power:50 hp
Max RPM:2000 rpm
Turning Dia:18.9 "
Swing:28 "
Machining Length:44.1 "
Dimensions:153" x 94"
Weight:19,640
Control:FANUC 18iTB
|
|
| Ad # 12334 | Turning Center 11 in. & over chuck |
| 2007 |
Mazak |
Matrix Nexus QTN 250-ii |
Good |
sold |
Photo /
More Info. |
| 3 Jaw 10" 14" x 18": Mazak Matrix Nexus QTN 250-ii
MAZATROL MATRIX NEXUS
4000RPM
3" Spindle Bore
10" Chuck 3 Jaw
12 Station Turret
Programable tail Stock
Parts catcher
6 Ft Bar Feed
LNS Quick Load 65 |
|
| Ad # 12332 | Turning Center 11 in. & over chuck |
| 2004 |
Haas |
SL-30 |
Good |
sold |
Photo /
More Info. |
| 3 Jaw 10" Chuck 30 HP : HAAS SL-30
3" Spindle Bore
SWING DIAMETER S.A.E. Metric
Over Front Apron 30 " 762 mm
Over Cross Slide 14.5 " 368 mm
CAPACITIES S.A.E. Metric
Chuck Size 10.0 " 254 mm
Maximum Bar Capacity 3.0 " 76 mm
Between Centers 39.0 " 991 mm
Maximum Cutting Diameter 17.0 " 432 mm
Maximum Cutting Length 34.0 " 864 mm
Max Cutting Length w/ Std Workholding 32.0 " 813 mm
SPINDLE S.A.E. Metric
Maximum Speed 3400 rpm 3400 rpm
Torque 300 ft-lb @ 700 rpm 407 Nm @ 700 rpm
Torque w/ optional transmission 850 ft-lb @ 250 rpm 1152 Nm @ 250 rpm
Max Power Rating 30 hp 22 kw
Spindle Nose A2-6 A2-6
Spindle Bore ø 3.50 " 88.9 mm
Draw Tube Bore ø 3.03 " 77 mm
TRAVELS & FEEDRATES S.A.E. Metric
X Axis 11.30 " 287 mm
Z Axis 34.00 " 864 mm
X-Axis Max Thrust 3400 lb 15124 N
Z-Axis Max Thrust 5400 lb 24020 N
Rapids on X 710 in/min 18 m/min
TURRET S.A.E. Metric
Number of Tools 12 12
OD vs ID Tools Any combination Any combination
Tool Size (OD turning) 1.0 " 25 mm
Boring Bar Rear Clearance (from turret face) 4.50 " 114 mm
Index Time (one tool) 1 sec 1 sec
ACCURACY S.A.E. Metric
Positioning (±) 0.0002 " 0.0051 mm
Repeatability (±) 0.0001 " 0.0025 mm
MISCELLANEOUS S.A.E. Metric
Weight 16000 lb 7258 kg
Power Requirement 28 kVA 28 kVA
Volts/Phase 200-250 VAC @ 100 Amp,
3-phase 60 Hz 200-250 VAC @ 100 A,
3-phase 60 Hz
Coolant 50 gallon 189 liter
Air Requirement 4 CFM @ 100 psi 113 lpm @ 6.9 bar
w/ optional Transmission Gearbox
Standard Gearbox
Standard
Peak Horsepower 40 hp 30 kw
Spindle Nose A2-8 A2-8
Spindle Bore ø 4.62 " 117.3 mm
Draw Tube Bore ø 4.06 " 103.1 mm
Power Requirement 28 kVA 28 kVA
WITH TAILSTOCK OPTION S.A.E. Metric
Taper MT4 (MT5 opt) MT4 (MT5 opt)
Travels 33.5 " 851 mm
Thrust (min) 300 lb 1334 N
Thrust (max) 1500 lb 6672 N
as of 6-20-2012 Hrs: 1532 run Hrs & 6772 on time hrs |
|
| Ad # 12331 | Turning Center 11 in. & over chuck |
| 1980s |
Mazak |
M4 |
Fair |
sold |
Photo /
More Info. |
| 20" x 40": Mazak M 4
Fanuc System 6T
20" x 40"
3" Spindle Bore
3 Jaw 12" Chuck
12 Tool Holders |
|
| Ad # 11229 | Turning Center 11 in. & over chuck |
| 1980s |
Okuma |
LSN-10 |
Needs Work |
sold |
Photo /
More Info. |
| —: Used Okuma LSN-10 CNC Lathe
21" swing x 50" centers
15 HP
10 station twin turrets
12" 3 Jaw Chuck
control: OSP 3000 |
|
| Ad # 14623 | Turning Center 11 in. & over chuck |
| 12/2005 |
Haas |
SL30T |
Good |
Sold |
Photo /
More Info. |
| 12" chuck.: 2005 Haas SL30T CNC turning center
12" 3 jaw chuck
tool presetter
tailstock
30HP spindle motor
spindle bore: 3-1/8"
std: specs below -please verify
Haas SL30 2006 tailstock
10 inch 3 jaw
hi intensity lighting
QC
tool presetter
floppy
1MG
no live tooling
belt conveyor
tailstock
2006 Haas SL-30t
CNC Turning Center
Specifications:
Maximum Swing 30"
Max. Cutting Diameter 14.5"
Maximum Machining Length 34"
X-Axis Travel 17"
Z-Axis Travel 34"
Spindle Nose A2-6"
Spindle Bar Capacity 4.00"
Spindle Speed 20 - 3, 400 RPM
Spindle Motor 30 HP
Turret Type Bolt on Type
Rapid Traverse 710 IPM
Tailstock Quill Center Body Trav. MT # 4 33.5"
Equipped With:,(*must be verified by buyer):
Standard Haas 32 Bit CNC Control
Standard RS 232 Port
Standard 3.5 Floppy Drive
Standard 1 Meg Memory
Standard Chuck Size 10" Power Chuck
Standard Rigid Tapping
PTS30L Fully Programmable Hydraulic Tailstock
HIL High Intensity Lighting
CCA30 Chip Conveyor
VQC Haas Visual Quick Code Programming System
LTPS30 Tool Pre-Setter
All Available Manuals
Hours Subject to Change
|
|
| Ad # 5907 | Turning Center 11 in. & over chuck |
| 1988 |
MAZAK |
35-ATC |
Excellent |
Sold |
Photo /
More Info. |
| MAZAK Slant Turn 35-ATC M/C CNC Turning / Milling Center: MAZAK Slant Turn 35-ATC M/C CNC Turning / Milling Center
Equipped With C-Axis, Live Milling, & ATC
Swing Over Bed 18.1"
Swing Over Cross Slide 12"
Maximum Turning Diameter 11.8"
Distance Between Centers 39.37"
Spindle Bore Diameter 3.15"
Spindle Speed Range 12 - 3000 RPM
Spindle Nose A2-8
Main Spindle Motor 30 HP / 25 HP
Rotary Spindle Drive 5 HP
Rotary Spindle Speeds 2000 RPM
Z-Axis Travel 40.47"
EQUIPPED WITH:
C-Axis Spindle Indexing
12" 3-Jaw Hydraulic Chuck
Tailstock
Automatic Chip Conveyor
Mazatrol CAM T-3 CNC Control
Door Interlock
Assorted Tool holders
16 Station Automatic Tool changer
|
|
| Ad # 5906 | Turning Center 11 in. & over chuck |
| 1997 |
MITSUBISHI |
M-TC10B |
Excellent |
Sold |
Photo /
More Info. |
| MITSUBISHI M-TC10B Diaturn 2-axes CNC Slant Bed Turning Center: MITSUBISHI M-TC10B Diaturn 2-axes CNC Slant Bed Turning Center
Max. swing over bed 23.6”
Max. swing over carriage 13.8”
Max. machining diameter(chuck work) 13.4”
Max. machining diameter(center work) 10.2”
Max. length between centers 41.3”
X-axis travel 8.1”
Z-axis travel 42.9”
X-axis rapid rate 591 IPM
Z-axis rapid rate 787 IPM
X,Z-axis feed rate 0.04-275.6 IPM
Spindle speed range 22-3000 RPM
Spindle diameter 5.12”
Spindle bore 3.41”
Spindle nose JIS A2-8
Tailstock spindle diameter 3.94”
Tailstock center size No. 5 M.T.
Tailstock spindle travel 3.94”
EQUIPPED WITH:
12-Station turret
Programmable tailstock
12”Dia. 3-jaw power chuck
Automatic chip conveyor
Remote foot pedal
Flood coolant
Quantity of tool holders and chuck jaws
Door interlock
X-axis MP scale feed back
Work light
15 H.P. AC spindle drive
Mitsubishi Meldas 325 LG-V control with 14” Color CRT,
port, conversational programming
|
|
| Ad # 13287 | Turning Center 11 in. & over chuck |
| 1994 |
Okuma |
LB-25 Big Bore |
Excellent |
sold |
Photo /
More Info. |
| 15" Chuck: Okuma LB-25 Big Bore
Osp 5020 CNC
15" Chuck
4.33" Bore
Tailstock
Chip conveyor |
|
| Ad # 7613 | Turning Center 11 in. & over chuck |
| — |
DAEWOO |
Pan 20 |
Needs Work |
sold |
Photo /
More Info. |
| 20" x 60" CNC Flat Bed Lathe: DAEWOO Pan 20
Control: Fanuc 6T
Swing over Bed: 20"
Swing Over Ways: 26"
Distance Between Centers: 60"
Chuck Size: Kitagawa 12" 3-Jaw Chuck
Spindle Bore: 2-1/2"
Tailstock: Hydraulic with pressure control
Turret: 5 Station
Tool Post: Quick Change, 4 position tool post
Coolant System |
|
| Ad # 13956 | Turning Center 11 in. & over chuck |
| 2005 |
Mazak |
OTN-350 |
Good |
sold |
Photo /
More Info. |
| 3 JAW 12in. Chuck; 4in. Spindle Bore: Mazak quick turn Nexus 350
Model: ONT-350
Year: 2005
208V
CNC Mazatrol 640 TNexus
MAX spindle speed: 3300 RPM
12 tool turret
4-inch spindle bore
Chip Conveyor
Tail Stock
3 JAW 12in. Chuck |
|
| Ad # 10249 | Turning Center 11 in. & over chuck |
| 1996 |
Mazak |
Slant Turn 50N-2000U |
Very Good |
Sold |
Photo /
More Info. |
| 16" chuck : 16" 3 jaw chuck
chip conveyor
25 tool turret-inner & outer dia
control: mazatrol T-plus
steady rest support
tailstock
Std specs below please verify
MAZAK ST 50N Basic Spec Machine Type :horizontalControl :MazatrolNumber of Axes :2Cutting Diameter :356 to 660 mmCutting Length :1524 to 2032 mmBar / Bore :89 to 165 mmTool Stations :15Spindles :1Motor Power :37.29 kwSpindle Speed :0 to 1600 rpm
Specification Description
SPECIFICATIONS
Max. Swing 31.7"
Swing Over Carriage 22"
Max. Cutting Diameter 26"
Distance Between Centers 80"
X Axis Travel 22.64"
Z Axis Travel 82"
Spindle Speed Ranges 4 - 1600 RPM
Spindle Nose A1-11
Spindle Bore 4"
Type Of Turret Decagonal Drum
Number of Turret Positions 15
Rapid Traverse Rate X Axis 475 IPM
Rapid Traverse Rate Z Axis 640 IPM
Tailstock Body Travel 74"
Tailstock Quill Diameter 5.9"
Tailstock Center MT#5
Tailstock Quill Travel 5.12"
Main Motor (30 Min) AC 50 HP
|
|
| Ad # 10223 | Turning Center 11 in. & over chuck |
| — |
Giddings & Lewis |
Smart turn H-18 |
Good |
Sold |
Photo /
More Info. |
| —: |
|
| Ad # 8267 | Turning Center 11 in. & over chuck |
| 1998 |
Johnford |
TC-20-C |
Good |
sold |
Photo /
More Info. |
| 20in x 20 in Johnford CNC Lathe With Barfeeder: Johnford TC-20-C CNC Lathe
Model: TC-20-C
Swing:22"
Swing Over Cross Slide:20"
Turning Length:20.47"
Work Station (1) No of Headstocks:1
Spindle Power:15.33 HP
Spindle Ranges:1
Spindle Bore:2.59"
Bar Capacity:2"
Spindle Nose:A2-6
Spindle Speed:40 - 4000 RPM
Chuck Size:8"
Rotary Axis:C Standard
Rotary Increment:0.001 Deg
Rotary Max. Angle: 360 Deg
Tool Changer 1
Type:Turret
Tool Stations:12
Driven Stations:12
Square:.78"
Round:1.25"
Rotary:1.25"
Driven Tool Speed:6000 RPM
Driven Tool Power:3.06 HP
Axis:X Standard
X Travel:6.69"
X Rapid:590 IPM
Axis:Z Standard
Z Travel:15.74"
Z Rapid:708 IPM
Tail Stock:Standard
Tail Stock Quill Diameter:2.36"
Tail Stock Quill Travel:2.36"
Tail Stock Quill Taper:MT #4 / MT #3
Tail Stock Body Travel:11.81"
Equipped With:
Automatic Bar Feeder w/ Hydraulic Suspension
Make: Iemca
Model: Boss 542 CNC
Year: 1998
Live Tooling w/ 2 Live Tools
Fanuc OT Control
|
|
| Ad # 13226 | Turning Center 11 in. & over chuck |
| 1997 |
AMERA SEIKI |
TC-4L |
Fair |
sold |
Photo /
More Info. |
| 12" chuck: Fanuc CNC Control
Chuck Size 12"
Round Collet Capacity 3"
Hex Collet Capacity 2 9/16"
Square Collet Capacity 2"
Max work length 23.62"
Max Turning Diameter 13"
Max Turning Length 23.62"
Max Swing Diameter Over Slide Center 20"
Spindle Nose A2-8
No. of Tool Stations - 12
X - Axis 8.66"
Z - Axis 25.60"
40 HP AC motor |
|
| Ad # 4634 | Turning Center 11 in. & over chuck |
| — |
Betts-Bridgeford |
— |
Good |
SOLD |
Photo /
More Info. |
| 60" Swing, 85 ft Between Centers CNC Lathe: Two Axis CNC Shaft Lathe W/ 2 Head Stocks and Three Carriages:
CNC Retrofit in 1980 and has been used very little since that time as it was a standby unit.
60" Diameter x 85'-6" Center to Center Capacity
Two Headstocks
69" diameter maximum swing over bed,
85'6" center to center capacity between headstocks
(2) 50 hp. capacity headstocks,
0 to 60 rpm spindle speeds,
3-1/2" diameter hole through spindle,
(2) 63" 4 jaw chucks,
(3) independently controlled power feed carriages w/ GE Mark Century 1050 CNC controls, steady rests,
chip conveyor,
3 taper attachments and tooling.
|
|
| Ad # 14568 | Turning Center 11 in. & over chuck |
| 1982 |
Wasino |
L5-J2 |
Good |
sold |
Photo /
More Info. |
| 12" chuck: Wasino #XXL5-J2 turning center
12" 3 jaw chuck
control: Fanuc 6T
swing: 22.5" over ways
nominal work size: 10" x 24" max 31.5"centers
spindle bore: 3.5"
spindle nose: A2-8
speeds: 8-3000rpm
Z travel: 35"
X travel: 11"
turret-drum type 8 tools
rs232 port
chip conveyor
manuals
Note: nice running machine!
rigging/loading fee:$1600.00 |
|
| Ad # 1781 | Turning Center 11 in. & over chuck |
| 1996 |
Monarch |
TC-3 |
Good |
sold |
Photo /
More Info. |
| Heavy Duty CNC Turret Lathe: Control: Allan-Bradley Series 9
Spindle Nose: A2-11
Spindle power: 30/40 HP (cont/30 min)
3 Speed gear box driven
Single 8-Station Turret
Fitted for flume operation (Central coolant/chip
system)
|
|
| Ad # 7305 | Turning Center 11 in. & over chuck |
| 82/83? |
OKUMA |
LC30-2SC |
Good |
Sold |
Photo /
More Info. |
| OKUMA LC30-2SC 4-AXES CNC LATHE: OSP CNC Control Model 3000
Swing over bed: 19.69”
Swing over cross slide: l6.l4”
Chucking part diameter maximum: l7.72”
Bar capacity (standard): 2.5”
Axis Travel
“X” Axis stroke - Upper Turret: 9.06”
------------------Lower Turret: 5.3l”
“Z” Axis stroke - Upper Turret: 20.47”
------------------Lower Turret: l9.69”
Spindle nose: ASA-A2-8
Standard through hold: 3.03"
Spindle drive motor: 40 HP
Spindle speeds (4 ranges): l5-3000 RPM
Infinite variable
Rapid traverse rate:
“Z” Axis: 400 IPM
“X” Axis: 200 IPM
Turrets (2) : l2 & 8 Stations
Equipped with:
Chip Conveyor
|
|
| Ad # 10047 | Turning Center 11 in. & over chuck |
| 1980 |
LeBlond |
Tapeturn 3220 HD |
Very Good |
Sold |
Photo /
More Info. |
| 32" X 360": 32" X 360" ( 32" swing, 360" between centers)
CNC Lathe with Fanuc O-M Control,
equipped with (2) steady rests,(2)
24" 4 Jaw chucks,
4 positon turret, chip guarding |
|
| Ad # 4464 | Turning Center 11 in. & over chuck |
| 1987/88 |
Daewoo |
Pan 20 |
Good |
sold |
Photo /
More Info. |
| 20" x 60" CNC Gap Bed Lathe: Fanuc l0T Control
Specifications:
Swing over bed: 20.5”
Swing over cross slide: ll.8”
Max. cutting dia.: ll.8”
Max. bar work dia. : 2.5”
Max. cutting length: 52.6”
Bed center distance: 59.l”
Width of bed: l6.5”
Center height over bed: l0.6”
Center height over floor: 43.7”
Spindle nose: ASA A2 #8
Spindle bore dia.: 3”
Spindle bore taper: 3.3, l/20
Spindle center: MT #5
Spindle dia. /Front brg.: 4.7
Spindle speed change: 3 Step
Spindle speed range: 30-2500 RPM
Rapid traverse ‘X’: l97” /min
‘Z’: 394” / min
Stroke ‘X’: 14.2”
‘Z’: 54.5
No. of tools 10: OD-6 ID 4
Tailstock Center: MT #5
Tailstock quill dia.: 3.l”
Tailstock quill stroke: 4.7"
Main motor: l5/20 HP
Equipped with:
6-Station front turret
4-station rear turret
Hydraulic draw cylinder without chuck
Chip conveyor w/coolant system
Tailstock |
|
| Ad # 10048 | Turning Center 11 in. & over chuck |
| 1984 |
Mori Seiki |
LL6 Chucker |
Good |
sold |
No Photo /
More Info. |
| 45" Swing: 45" Swing, 40" B/C, 8.5" Spindle Hole, equipped with (1) 6 position vertic... |
|
| Ad # 7240 | Turning Center 11 in. & over chuck |
| 1996 |
Mori Seiki |
CL-20 B |
Excellent |
Sold |
Photo /
More Info. |
| 18" x 15" Mori CNC Turning Center: Control: Fanuc/Mori MF-T8
Swing Over Bed: 18.5"
Swing Over Slide: 14.96"
Max Turning Diameter: 12.20"
Standard Turning Length: 5.91"
Maximum Turning Length: 12.99"
Bar Capacity: 2.55"
Travels:
X Travel: 7.48"
Z Travel: 14.57"
Rapid Travels:
X Axis: 590 ipm
Z Axis: 787 ipm
Feed/rev:
X Axis: 0 - 19.69"/rev
Z Axis: ) - 19.69"/min
Spindle Speeds: 35 - 3,500 rpm (Infinitely variable)
Spindle Power: 10/7.5 hp
Spindle Through Bore: 2.87" diameter
Spindle - Inner Bearing Diameter: 4.33" diameter
Turret: 8 Station
Square Tool Holder: 1" sq.
Round Tooling: 2" diameter |
|
| Ad # 11933 | Turning Center 11 in. & over chuck |
| 1991 |
Gidding & Lewis |
50U |
Excellent |
sold |
Photo /
More Info. |
| Travel Z 72" x X 9.75": Gidding & Lewis 50U CNC Lathe
Mfg. date 1991
G & L CNC Controller
Max swing, 30"
Max Turning dia. w/ turning
turret, 18"
Max Turning length, 72"
X axis travel, 9.75"
Z axis travel, 72"
Spindle speed, 20- 1440 rpm
Spindle bore, 5.18"
Feedrate, 0.1- 200 ipm
Rapid Traverse rate, 400 ipm
Tailstock quill taper, MT #5
Spindle drive motor, 50 hp
14 tool turret
Chuck 18" dia. Hydraulic
Hydraulic tailstock
RS 422 AND Serial ports
Jorgensen chip conveyor
LNZ Hydrobar barfeeder,
type HY57.114-5.2
5" capacity
993 hours on machine |
|
| Ad # 7207 | Turning Center 11 in. & over chuck |
| 1974 |
MONARCH |
25NC |
Very Good |
Sold |
Photo /
More Info. |
| 30” x 168”cc MONARCH Pathfinder N.C. Straight Bed Lathe, Model 25NC: 30” x 168”cc MONARCH Pathfinder N.C. Straight Bed Lathe, Model 25NC
Max. Swing over bed 31”
Max. Swing over cross-slide 20”
Hole through spindle 3 1/16”
Center size No.6 M.T.
Spindle nose D-1-8-Camlock
Bed width 22”
Tailstock spindle diameter 5 ¾”
Tailstock Spindle travel 10”
4 Ranges spindle speeds (Infinity variable) 10-1250 RPM
Minimum programmable increment .0001”
Longitudinal threading rates up to 150 IPM
Traverse rates up to 275 IPM
EQUIPPED WITH:
Flame hardened bed ways
Interchangeable square tool post and hexagon tool post
Tailstock
Automatic chip conveyor
12” Dia. capacity roller steady rest
Built-in live tailstock center
20” Dia. 3-jaw power chuck w/ extra jaws
Pan bed and Coolant system with sliding splash guard
Automatic coolant supply to each tool
Heavy duty cross bridge on hardened dovetail with ball screw drive
Carriage driven by preloaded rack and pinion with precision feed back and hydraulic Servo Motor
40 H.P. DC Main Drive Motor
G.E. Mark Century 7500 N.C. Controller |
|
| Ad # 13110 | Turning Center 11 in. & over chuck |
| 1996 |
HAAS |
HL-4 |
Good |
Sold |
Photo /
More Info. |
| 14.5" x 39": HAAS
HL-4
Voltage 230/3
10" Chuck
MAX SWING OVER FRONT APRON 24"
SWING OVER CROSS SLIDE 9.5"
MAXIMUM TURNING DIAMETER 14.5"
DISTANCE BETWEEN CENTERS 39"
MAXIMUM CUTTING LENGTH 34"
X AXIS TRAVEL 11.3"
Z AXIS TRAVEL 34"
RAPID TRAVERSE RATE X & Z AXES 710 IPM
SPINDLE BORE 3.0"
MAXIMUM BAR CAPACITY 2.5"
SPINDLE SPEEDS 3400 RPM
SPINDLE MOTOR 30 HP
TURRET CAPACITY 12 STATIONS
Tail stock
|
|
| Ad # 16082 | Turning Center 11 in. & over chuck |
| 2005 |
sunfirm/max tec |
4260 |
Good |
sold |
Photo /
More Info. |
| —: 2005 model SunFirm 4260
with 10" spindle CNC
under power
4 jaw front chuck,
3 jaw rear chuck
MaxTech Sun Firm bought new in 2006. Paid
$210,000.00, |
|
| Ad # 16081 | Turning Center 11 in. & over chuck |
| 2005 |
kingston |
CL-38 |
Good |
sold |
Photo /
More Info. |
| 10ft: 2005 Kingston CL-38
10' between centers,
front 4 jaw,
front & rear turret bought new 2006
paid
around $160,000.00
Chip conveyorstd mfg specs
below..verify actual machines
Fanuc oi-10 control
Swing Over Bed 26″
Maximum Cutting Diameter (2 Turrets) 14.5″
30 hp
2005 Kingston CL-38
10' BC
7" thru hole
under power |
|
| Ad # 14512 | Turning Center 11 in. & over chuck |
| 1984 |
Okuma |
LC30 |
Good |
sold |
Photo /
More Info. |
| 12" hyd chuck: 1984 Okuma LC30 CNC lathe
Equipped With:
OSP-5000L CNC control with IGF, chip conveyor
and
owner manuals. Comes with approximately 40 tool
holders, Tools in turret not included.
Specifications:
Chuck Size 12" Hydraulic Chuck
Swing Over Bed (26") 19.69"
Maximum Turning Diameter 17.72"
X Axis Travel 11.42"
Z Axis Travel 20.47"
Spindle Nose/Spindle Bore A2-8"/3.03"
Spindle Speed 15 ~ 3000 RPM
Spindle Motor 30 HP
Number of Spindle Speeds 4 Speed Ranges
Number of Turret Positions 12 Position Turret
Rapid Traverse Rates X, Z 200 IPM / 400 IPM
Tailstock Quill Diam. / Quill Travel 3.94" /
5.91"
Machine Dimensions 172" x 92"
Machine Weight (approximately) 18,000 lbs.
"Approximately 40 tool holders"
|
|
| Ad # 13084 | Turning Center 11 in. & over chuck |
| 1986 |
Mori seiki |
SL-3H |
Good |
sold |
Photo /
More Info. |
| 22.2" x 24": Mori Seiki
Model SL-3H
Control Fanuc System 6T
22" x 24" Swing
13" Swing over Carriage
12 Station Tool Changer
Tail Stock
3 Jaw 10" Chuck
Needs spindle drive Board, we replaced the drive 3
years ago. Both times the spindle drive went out
we had a power outage. We decided to take out of
surface because one chucking job ran on it 4-5
days a month and we needed the space. Machine
runs solid like a Mori and is a good machine for
chucking. |
|
| Ad # 4375 | Turning Center 11 in. & over chuck |
| 1982 |
OKUMA |
LS-N |
Very Good |
Sold |
Photo /
More Info. |
| Large 4-Axis Turning Center: Control: OKUMA OSP 3000-L
Swing: 22"
Distance Between centers: 54"
Spindle Bore: 2.5"
Spindle Speed: 2,500 rpm (4-Stage Gear Box)
Chuck: 12" 3-Jaw Hydraulic (new)
Front Turret: 4-Way Post
Rear Turret: 6 Station
|
|
