Home   |   Contact Us   |   About Us   |   Email NetMachinery  |   Tel: 704-904-9123

Home > NetMachinery Equipment Listings > Flame, Plasma, Laser & Water Jet Cutting
We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 2006 Make - Calypso Model - Hammerhead
Mouseover Thumbnails to Enlarge

Price: $54995.00 reduced USD   
Category: Water Jet
Capacity: 4 x 4 table

Ad # 15718

Add/Remove from Checklist
Year: 2006
Make: Calypso
Model: Hammerhead
Condition: Good

Machine Status:Not Under Power
Shipping Info:We can load
Dimension: L x W x H

Machine Location:
City: On Request
State: Florida


$54995.00 reduced USD

Click Here to Print Quote

Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item   

General Description
  • 2006 Calypso CNC water jet.
    American made..
    table :4ft x 4ft
    It was purchased in February of 2016 for
    those just in-case scenarios. It was in
    a government facility and was OVERLY maintained as it has a TOTAL OF 500 HOURS ON IT!!!!!
    It has a KMT 30k (S30) pump and the high pressure
    cylinders (if you know anything about water its) have never even been removed. This unitshows like brand new.
    cost new ($169,000.00 NEW)
    4’ X 4’ Waterjet Cutting System with Calypso PC Based CNC Controller, KMT 30HP 60KPSI Intensifier Style Pump, Up To 1,500 IPM Cutting Speeds, 800 LB Bulk Abrasive Feeder, Programmable Z-Axis, Sealed Control Cabinet, Sealed Waterproof Keyboard and Closed Loop AC for Control Cabinet and with only 500 Operating Hours this system is in “As-New” condition!
    std mfg specs below-please verify actual machines

    Bridge Gantry X-Y table on Uniframe – Full 5 Feet X 5 Feet Work Area
    Fully Sealed Bellow System
    Servo Controlled Z axis, with Auto Tool Lift and Nudge Jog
    Abrasive Cutting Head
    30 HP Intensifier Pump – 60,000 PSI Operating Pressure
    Control Console – Industrially Hardened
    PC Computer with Windows OS

    Calypso’s Exclusive Software Suite – from Drawing to Part
    Abrasive Bulk Hopper
    Digital Abrasive Metering system
    “Rain Gutter” helps provide clean work area


    Actual X axis travel (Bridge travel or width):49”

    Actual Y axis travel (depth):49”

    Z Axis Travel:6” to top of bed

    Table Width:67.5” between side frames

    Table Depth:55”


    Bridge Gantry Driven From Both Sides

    Machine Squareness Maintained Electronically


    True Closed Loop Servo Drive System – Loop Is Closed Back to the Controller

    Brushless Servo Motors

    Precision Rack and Pinion Drive System/planetary Low Backlash Gearheads

    Speed Range (standard): .1 To 500 IPM Standard

    Straight Water Cutting Speeds: Up To 1500 Ipm

    Recirculating Ball Bearing Runner Blocks On Hardened Precision Ground Ways.

    360° Bellows Seal All Motion Components From Abrasive Invasion


    Bulk abrasive Hopper: The system includes a completely integrated Bulk Transfer Vessel, with reinforced flexible transfer hose. The system uses shop compressed air, and can be placed to either side of the cutting table, and has a maximum capacity of 800 lbs.

    Digital Abrasive Control (DAC): Digitally commanded from the PC Control system, DAC provides precise metering and control at the cutting head. The system is computer controlled, the desired abrasive flow rate can be quickly changed at the PC control.


    Calypso’s exclusive control software is the easiest to use in the industry, and

    provides multiple options that improve cutting control, as well as including costing, array nesting, and other features that are “extra” on other waterjet systems.

    Control Console: Calypso systems utilize a roll around, industrially hardened console that contains the PC computer; control electronics and servo drive

    hardware. The PC utilizes the current standard in PC processor speed and hard drives and Windows OS. The system includes a Ethernet card and external sealed Ethernet port. The console has an external 4-port USB hub to accept memory sticks.

    Exterior cables plug directly to military grade connectors on the main control circuit board and operator buttons reside on the front panel board.

    The system utilizes a 30HP 60KPSI Intensifier Style Pump Manufactured Exclusively for Calypso by KMT Waterjet System. This pump is fully integrated to the operating system and controller of the machine and features:

    (1874) 2006 Calypso Hammerhead 55 Waterjet Cutting System - Pic 18.jpg

    Dual Pressure Control for automatic High/Low cycling of pressure.

    Long slow stroke intensifier for extended seal life.

    Ceramic plungers for increased plunger life.

    Cartridge quick-change hydraulic seal design.

    Long seal life design.

    High efficiency Heat Exchanger

    Quiet operation

    INCLUDES: Calypso PC Based CNC Controller, KMT 30HP 60KPSI Intensifier Style Pump, Up To 1,500 IPM Cutting Speeds, 800 LB Bulk Abrasive Feeder, Programmable Z-Axis, Sealed Control Cabinet, Sealed Waterproof Keyboard and Closed Loop AC for Control Cabinet and with only 500 Operating Hours this system is in “As-New” condition!
    we purchased a larger Calypso Water Jet new in 2006 and know this machine inside and out! We
    run our larger water jet every day and wouldn't even consider a different brand. we would be willing to throw in some training and/or help
    in the future as he has been working with
    the same software as on this new unit for 12 years now.

    We are able to load onto a trailer or flat bed. No serious rigging needed (BIG $AVING$)
    due to its size/weight.

Purchase Information
To Receive more info via E-mail Click Here
or Phone NetMachinery.com at 704-904-9123 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed 55570 Times.

Print Friendly Ad Popup Loan Calculator Add/Remove from Checklist

Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User



***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions