Quotation

05/06/2024"
We are pleased to offer the following equipment, Machine sold "As is, Where is " buyer inspection encouraged

One (1) Ad # 15365, K. O. Lee Tool Grinder, Model B6062 BB, new in 1994?, including the following specifications and accessories.

General Description
    1. Distance between Tailstocks: 32"
    2. Distance between Centers in Workhead and
    Tailstock:
    B9043 -- 24"
    3. Distance between Collet in Workhead and
    Tailstock:
    B9043 -- 25"
    4. Distance between B946 Chuck Face and
    Tailstock: 9043
    -
    - 23 ½"
    (1"hole through chuck)
    5. Table Working Surface: 5 ¼ x 27 ¼
    6. Sub Table: 8" x 48"
    7. Total Crossfeed Movement: 8"
    Feed per Revolution of Handwheel (.001
    Grad.): .100"
    8. Table Traverse: 20"
    Fast Feed per Revolution of Handwheel: 2
    13/16"
    Slow Feed per Revolution of Handwheel: 9/16
    "
    Ratio -- Fast: Slow: 5:1
    9. Vertical Movement of Column: 10 ½"
    Feed per Revolution of Handwheel: .050
    10. Column Diameter: 6"
    11. Swing Over Table (1" and 2" Raising
    Blocks Available): 12
    ¼"
    12. Minimum Distance Centerline of Wheel
    Shaft to Top of
    Table: 5 3/8"
    13. Maximum Distance Centerline of Wheel
    Shaft to Top of
    Table: 15 ¼"
    14. Maximum Distance from Column to Outside
    of Straight
    Wheel; Dovetail Slide not Extended, Spindle
    90 deg to
    Table:
    6 3/8"
    15. Maximum Distance from Column to Outside
    of Straight
    Wheel; Dovetail Slide Extended, Spindle 90
    deg to Table: 11
    ½"
    16. Centerline Height of Fixtures to Top of
    Table: 6.130"
    17. Table T-Slot: 7/16"
    18. Table Swivels (Calibration: 3" per ft.,
    15 deg either side
    of center): 225 deg
    19. Wheel Head Swivel: 360 deg
    20. Motor Speed RPM: 3450
    Spindle Speed Range (Heavy Duty Grinders):
    2840-5330
    21. Maximum I. D. Depth. Hole Size 9/32" to
    2" Capacity
    with
    Standard Arbors: 3 ½"
    22. Maximum Crossfeed Surface Grinding
    Heavy Duty Grinders (8" Wheel): 5"
    23. Grinding Wheel Hole Size: 1 ¼"
    24. Net Weight (Pounds): 1280

    Other Parts:
    CHEVALIER -- C2AH -- Air Bearing Fixture 5C Collet Taper
    K.O. LEE Radial Grinding Fixtures --BA986
    K.O. LEE Workheads -- Motor-DrivenWorkheads-- B943
    Note: rigging- loading fee extra approx 850.00

Price:$sold USD, Net Payment Due Upon Receipt of Invoice.
Buyers Premium: A 15 % Buyers Premium applies to the final sale price of this item   
FOB California
Equipment will be available for loading upon receipt of full payment

Disclaimer: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.