Manual Double Self-Centering Vise Assures Burr-Free Cuts

Miter Capabilities 45 degrees Left and 45 degrees Right

Miter Locking Device: Quick, Qccurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right

Operator Controlled Trigger Switch

Capable of Slotting

Two Cutting Speeds

Hardened and Ground Worm and Wheel Gear Box

Worm Wheel of Top Quality Bronze

Chip Drawer

7 Gallon Coolant Tank with Pump

One 10" Diameter (250 mm) HSS Blade

One Blade Wrench

One Gallon Concentrated Coolant

230 or 460 Volt/3 Phase Electrics (must specify voltage)

Warranty: Three Years on Parts

Made in USA

Cutting Speeds Must Specify when Ordering     

LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe LT (Low Turn) 30 rpm / 60 rpm Motor rate: 2.0 hp

HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous materialHT (High Turn) 60 rpm / 120 rpm Motor rate:1.5 hp

SS(Single Speed) designed for 220v 1 ph applications SS (Single Speed) 60 rpm   Motor rate: 2 hp

TUBING 90 Deg 45 Deg (51 mm)

Round 3-3/8" (86 mm) 2" (51 x 51 mm)

Square 3" x 3" (76 x 76 mm) 2" x 2" (51 x 51 mm)

Rectangle 3" x 2-3/8" (76 x 60 mm) 2" x 2" (51 x 51 mm)

SOLID 90 Deg 45 Deg

Round 1-1/2" (38 mm) 1" (25 mm)

Square 1-1/2" x 1-1/2" (38 x 38 mm) 1" x 1" (25 x 25 mm)

Factory Wired    Specify 208 3 ph, 230 3 ph, 460 3 ph, 575 volt, 3 ph 60 hz, 220 1 ph (SS Model Only)

Maximum Diameter Blade 10-3/4", 275 mm

Arbor Bore 1-1/4", 32 mm

Pin Spacing 2/8/45

Width 21-7/8"

Depth 43-1/2"

Height not including handle 53-1/4"

Height from floor to vise 36-1/8"

Shipping Weight 550 lbs.(279 kg)