CAPACITY & DIMENSIONS
Swing over bed 26” (660mm)
Swing over cross slide 18-1/16” (460mm)
Swing in gap diameter 33-1/4” (845mm)
Length of gap infront of face plate 6-1/2” (165mm)
Between centers S2660S 60” (1,524mm) S2680S 80” (2,032mm) S26100S 100” (2,540mm) S26120S 120” (3,048mm) S26160S 160” (4,064mm)
Width of bed 15-3/4” (400mm)
Spindle motor 15HP 3Phase
HEADSTOCK
Spindle bore 4-1/8” (105mm)
Spindle nose D1-11 Camlock
Spindle taper in nose/sleeve M. T. #8
Speed number 12 Steps
Speed ranges 15 ~ 1,200 rpm
CARRIAGE & COMPOUND
Cross slide travel 15” (380mm)
Compound rest travel 10” (255mm)
Leadscrew diameter & thread 1-1/2” (38 mm) 4 T.P.I.
THREADS & FEEDS
Imperial threads 2 ~ 112 TPI x 60 Kinds
Metric threads 0.2 ~ 14 mm pitch x 60 Kinds
Diametral pitch threads 4 ~ 112 D.P. x 50 Kinds
Module pitch threads 0.2 ~ 7 M.P. x 50 Kinds
Longitudinal feeds Imperial 0.0014” ~ 0.0387” /rev. x 50 Kinds Metric 0.037 ~ 1.04 mm/rev. x 50 Kinds
Cross feeds Imperial 0.0007” ~ 0.01935”/rev. x 50 Kinds Metric 0.0185 ~ 0.52 mm/rev. x 50 Kinds
TAILSTOCK
Quill diameter/travel 2-15/16” (75 mm) / 6-5/16” (160 mm)
Quill taper M.T. #5
WEIGHT & MEASURES
Length of machine S2660S 120” (3,048mm) S2680S 140” (3,558mm) S26100S 160-1/8” (4,068mm) S26120S 180-1/4” (4,578mm) S26160S 220-3/8” (5,598mm)
Width of machine 50-3/8” (1,280mm)
Machine height 53-3/8” (1,355mm) for S26 series
Packing dimensions S2660S 121”x45”x67” S2680S 140”x45”x67” S26100S 161”x45”x67” S26120S 185”x45”x67” S26160S 223”x45”x67”
Net weight S2660S 5,126 lb. (2,330 kg) S2680S 5,676 lb. (2,580 kg) S26100S 6,226 lb. (2,830 kg) S26120S 6,776 lb. (3,080 kg) S26160S 7,876 lb. (3,580 kg)
Gross weight S2660S 5,676 lb. (2,580 kg) S2680S 6,270 lb. (2,850 kg) S26100S 6,864 lb. (3,120 kg) S26120S 7,458 lb. (3,390 kg) S26160S 8,646 lb. (3,930 kg)
