|
Mouseover Thumbnail to Enlarge |
| FOR SALE: Ad # 9616 , Year = New , Make = GMC , Model = GT-2680 | 
| |
Ad #:
| 9616
|
| Year:
| New
|
| Make:
| GMC
|
| Model:
| GT-2680
|
| Equip. Type:
| 26x80HD Manual Lathe
|
| Our Price:
| call
|
| FOB:
| Pomona, CA
|
| Phone:
| 704-660-8130
|
|
|
Standard Equipment
|
| Free Taper turning attachment, , installed 12” 3-jaw chuck with top reversible jaws 20” 4-jaw chuck with top reversible jaws 25” Face plate 10” drive plate 4-3/4” – 10-1/4” large steady rest with roller jaws 1”-3” follow rest Removable gap 4-way tools post Foot brake Halogen Work light Coolant system Oil pump on apron for lubrication to all ways and leadscrews Section splash guard on Apron (2) dead centers and (1) reducing sleeve Thread chasing dial Tool box Full length rear splash guard for GT-2680 only Section splash guard on Apron for GT-26120 only
|
|
| Features:
|
ISO 9001 certified Large spindle bore 4-1/8” Adjustable mechanical spindle clutch for spindle start Forward/reverse and
brake, spindle brake without stop the spindle motor to longer motor 8 times life
than most other Brand lathe with electrical start/stop. 4-way rapid traverse on Longitudinal and cross ways All dual inch/metric dials. Solid cast iron machine base Heavy Duty guideway width 15-1/2” Heavy Duty main motor 15 HP 12 spindle speeds from 36-1,600 rpm Oil pump on apron for all ways and leadscrews Threading and feeding rate change without changing gears Spindle is balanced, hardened and precision ground Spindle is supported at 3-point by high precision bearings All gears and shafts are hardened and precision ground Guideways induction hardened and precision ground Automatic lubrication system in headstock and feed box One year warranty for parts
|
| Specifications:
|
Model
| GT-2680
| Net weight, approx
| 8,700 LBS
| Max. swing over bed
| 26”
| Max. length of workpiece
| 80”
| Max. swing over cross slide
| 16-1/2”
| Max. Swing in gap
| 34-1/4”
| Width of Bed
| 15-1/2”
| Effective length in gap to spindle
| 9”
| Effective length in gap to chuck jaws
| 6”
| Spindle bore
| D1-8 . 4-1/8”
| Taper of spindle center
| MT6
| Spindle speeds
| 36-1,600 rpm / 12 steps
| Longitudinal feeds
| 0.0023-0.093 IPR, 65 kinds
| Cross feeds
| 0.0011-0.04 IPR, 65 kinds
| Inch threads
| 13 & 28-2 TPI, 27 kinds- 28,14,7,3-1/2, 27, 24, 12, 6, 3, 22, 11, 5-1/2, 2-3/4< 20, 10, 5, 2-1/2, 18,9,4-1/2, 2-1/4, 16, 8, 4, 2, 11-1/2, 19
| Metric threads
| 1-14 mm , 22 kinds
| Module threads
| 0.5-7 mm, 18 kinds
| Diameter pitch threads
| 56-4 DP , 24 kinds
| Max. travel of top slide
| 5-3/4”
| Max. travel of cross slide
| 14”
| Longitudinal rapid traverse
| 18 ft / min
| Cross rapid traverse
| 8 ft / min
| Diameter of tailstock quill
| 3”
| Max. travel of tailstock quill
| 6”
| Taper of tailstock quill center
| M.T. # 5
| 4-way tool post size
| 1” x 1”
| Longitudinal leadscrew diameter / pitch
| Diameter: 1-5/8""-Pitch: 1-5/8 TPI
| Main Motor
| 15 HP, 220V/440V, 3 phase, prewired on 220V
| Rapid traverse motor
| 1/3 HP, 220V/440V, 3 phase, prewired on 220V
| Coolant pump motor
| 1/8 HP,220V/440V, 3 phase, prewired on 220V
| Overall dimensions, LxWxH
| 142” x 45” x 58”
|
|
|
|
Ad Summary: |
|
Note: Any Tailgate/Residential Charges NOT INCLUDED!"
|
Purchase Information
To Inquire about this machine contact: NetMachinery 704-904-9123
Or Click Request more information
|
|
|
