|
Quotation
| 04/26/2024" |
We are pleased to offer the following equipment, Machine sold "As is, Where is " buyer inspection encouraged
|
One (1) Ad # 13020, Traub, Model 240-S-1, new in 1985, including the following specifications and accessories.
|
General Description |
1985 Traub Turning Center TND 360 Swing Dia. Above Bed 360 mm Swing Dia. Above Cross Slide 160 mm Center Distance 800 mm Carriage Traverse, Longitudinal 810 mm Carriage Traverse, Transverse 205 mm Main Spindle: Spindle Bore Dia. (max. bar dia) 60 mm Spindle Nose Size A6/DIN 55026 Chuck Dia. 200 mm Bearing Dia. (IN Front Bearing) 110 mm Main Drive: DC Motor With Reduction Gearbox: Rating 27 Kw Transmission Stages: 2 Speed Range: 7-3150 (Programable In Stepless Increments Max. Speed, Stage one 800 RPM Max Speed, Stage two 3150 Max. Torque: Stage One :630 Nm Stage Two: 150 Nm Feed Drive: Contouring Rate: Rapid Traverse 10,000 mm/min Feed 10,000 mm/min Feed Thrust: X Axis 5000 N Z Axis 8000 N Tool Carrier: Number Of Tool Registers 8 External Tool Register: 25x25/110 Long Internal Tools: Direct Register Bolted On Toolholders 20 Dia./25/32 MT 2/3/4 Indexing Time (Direction Logic)1 Sec. (1 Station) Tailstock: Quill Dia. 85 mm Quill Stroke (Hydraulic) 110 mm Quill Thrust N Up To 9000 Quill Register MT5 / DIN229 Steady (Hydraulic,Self Centering) Fixed Steady: Dia. Capacity Range 12-55 mm Traveling Steady: Dia. Capacity Range 15-55 mm |
Price:$5995.00 reduced!! USD, Net Payment Due Upon Receipt of Invoice. | Buyers Premium: A 10 % Buyers Premium applies to the final sale price of this item | FOB Virginia | Equipment will be available for loading upon receipt of full payment
Disclaimer: Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
| |