Welcome to Industrial Machine Services

    Search Machinery:     By:     
Contact Information
Place FREE Ad
Latest Additions
Search Category
Chip Making Machinery
Fabrication Equipment
Non-Metal & Support Equip.
Ad Maintenance

Home > Machinery Listinings > CNC Lathes & Turning Centers

We found 1 matching ad. Now displaying the final ad.

FOR SALE: Year - 1984 Make - Toshiba Model - TMC-13A
Mouseover Thumbnails to Enlarge

Price: $82,990 reduced USD   
Category: Vertical Turret Lathe (VTL)
Capacity: 63" swing-live spindle,4axis with c axis

Ad # 8995

Add/Remove from Checklist
Year: 1984
Make: Toshiba
Model: TMC-13A
Condition: Good
Electrical: 460/3Phase

Machine Status:In Storage
Shipping Info:Rigging Fee Extra
Weight:18,500kg (40,700lbs)
Dimension: L x W x H

Machine Location:
City: On Request
State: Indiana


$82,990 reduced USD

Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item   

General Description
  • Toshiba TMC-13A Vertical turning & Boring Machine w/ live spindle and c axis

    Live spindle & c axis w/ toolchanger
    full C Axis and a live spindle(Milling head).
    no control-base machine only

    Maximum Swing - 1600mm (63")
    Table Diameter - 1250mm (49.2")

    Maximum height under ram face - 1250mm (49.2")

    Horizontal travel of rail head (X-axis) - -800 to +800mm (31.5")

    Vertical travel of ram (Z-axis) - 1000mm (39.4")

    Vertical travel of crossrail - 750mm (29.5")

    Maximum cutting force of square ram - 3,000kg (6,600lb)

    Maximum load of table (turning mode) - 10,000kg (22,000 lbs)

    Maximum load of table (milling mode) - 7,000kg (15,400 lbs)

    Maximum torque of table - 2100 kg-m (15050 ft.lb.)

    Maximum torque of spindle - 110 kg-m (785 ft.lb.)

    Maximum thrust force on spindle - 3000 kg (6600 lb.)

    Table speed (2 ranges) - 4 - 200rpm

    Spindle speed (2 ranges) - 20-1500rpm

    Cross rail positioning speed - 410mm/min (16.1 in/min)

    Table drive motor - 45kw (60hp)

    Spindle drive motor - 15kw (20hp)

    Number of tools - 24 (8 for turning, 16 for milling)

    Tool shank for turning - ISO #60

    taper piloted flange mount

    Tool shank for milling - ISO #50

    Maximum tool weight 50kg (110 lb)

    Tool jib crane - 500 lbs

    Voltage - 3ph/480V AC, 60Hz

    Primary power capacity - 120kVA

    Overall machine height - 5600mm (220")

    Machine weight - 18,000kg (40,700 lbs)

    Note: No control on this machine; it had a Mitsubishi control on it originally, was not supported anymore, model tmc, scrapped it, ready for retrofit of a new control; just needs control, drives rewired, total electrical retrofit needed. Original cabinets included with machine.

    Base machine is in great condition ready to retrofit with new controller by buyer.

    Notes: Some of the sheet metal and conveyors are in an enclosed semi trailer.

    The major components are in the same location
    (heated and dry) as the pictures. The machine base components, hydraulic unit and tool changer are all inside our building and dry. The other pics of the electrical cabinet, conveyor, covers and guard, motor, etc. are stored in a semi trailer and dry. The only rust I saw was some surface rust on the telescoping covers for the cross rail. This is typical for a running machine as these covers are not ever painted.

    Mechanical: When we received this machine, we
    disassembled to the extent necessary to inspect all the slide and inspected the wear surfaces and gibs. They were all in great and everything still had scrape pattern in all surfaces. No scraping was necessary. We also inspected the ball screws and they check out the same as the ways. This machine obviously seen very little use. We do know, it came out of a GE Aircraft facility and run jet engine components only. They replaced this machine will a new OM vertical because of the CNC control was no longer supported. It was a Toshiba controller. The table was removed and the bearing inspected. They were like new also. Basically, the entire machine was checked out mechanically and all was in great shape.

    As you can see in the pics, the storage of this machine has no effect on the components. The protective cross slide covers are present with some surface rust, the conveyor look good, the hyd. tank is inside and is shown in one of the pics, the ATC is in our storage area on the shelving and the splash guard and covers are, as far as I can tell, are present and in good shape. Although the components are in 3 different places, they were closely tracked and protected.

    This machine is in excent. mechanical condition and used only on aircraft parts manufacture. This machine needs retrofit with new controller and will be sold as is.

Purchase Information
To Receive more info via E-mail Click Here
or Phone Industrial Machine Services at (734) 765-0428 Do You need a Trucking Company? Click Here for Trucking Companies
Buyers Premium: A 5 % Buyers Premium applies to the final sale price of this item   

This Ad Has Been Viewed Times.

Add/Remove from Checklist

Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo | View All Ads Posted By This User


70k offer

***We strongly encourage personal inspection of all pieces of used equipment***

***All Price, Location and Specifications Subject to Change without Notice***

***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***

Terms: Offer is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyer's purpose, therefore Buyer agrees to inspect the equipment, and verify that it meets their needs and desires. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental damages, consequential damages, or lost profit damages, including any damages relating to delayed delivery, and any damages shall be limited to the price paid to Seller. Buyer and/or users shall be responsible to provide proper safety devices, equipment and training, and to comply with all governmental (local, county, state or federal) industry, or company required safety standards, including, but not limited to ALL OSHA standards. Buyer shall defend and indemnify Seller and Seller's sales representatives and partners from any claims or liabilities arising from the setup, operation, transporting, trucking, shipping, rigging, loading or other use of the equipment. Any claims against Seller shall be heard in North Carolina courts without a jury, and be decided under North Carolina State law.

See Standard Terms And Conditions