Price:
$82,990 reduced USD | Category: Vertical Turret Lathe (VTL)
Capacity: 63" swing-live spindle,4axis with c axis
Ad # 8995
|
| Year:
| 1984
|
| Make:
| Toshiba
|
| Model:
| TMC-13A
|
| Condition:
| Good
|
| Electrical:
| 460/3Phase
|
|
| Machine Status: | In Storage
|
| Shipping Info: | Rigging Fee Extra
|
| Weight: | 18,500kg (40,700lbs)
|
| Dimension: L x W x H | |
Machine Location:
|
| City: |
On Request
|
| State: |
Indiana
|
Country:
|
USA
|
Price: |
$82,990 reduced USD |
Click Here to Print Quote |
|
Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
|
|
| General Description |
- Toshiba TMC-13A Vertical turning & Boring Machine w/ live spindle and c axis
Live spindle & c axis w/ toolchanger
full C Axis and a live spindle(Milling head).
no control-base machine only
Maximum Swing - 1600mm (63")
Table Diameter - 1250mm (49.2")
Maximum height under ram face - 1250mm (49.2")
Horizontal travel of rail head (X-axis) - -800 to +800mm (31.5")
Vertical travel of ram (Z-axis) - 1000mm (39.4")
Vertical travel of crossrail - 750mm (29.5")
Maximum cutting force of square ram - 3,000kg (6,600lb)
Maximum load of table (turning mode) - 10,000kg (22,000 lbs)
Maximum load of table (milling mode) - 7,000kg (15,400 lbs)
Maximum torque of table - 2100 kg-m (15050 ft.lb.)
Maximum torque of spindle - 110 kg-m (785 ft.lb.)
Maximum thrust force on spindle - 3000 kg (6600 lb.)
Table speed (2 ranges) - 4 - 200rpm
Spindle speed (2 ranges) - 20-1500rpm
Cross rail positioning speed - 410mm/min (16.1 in/min)
Table drive motor - 45kw (60hp)
Spindle drive motor - 15kw (20hp)
Number of tools - 24 (8 for turning, 16 for milling)
Tool shank for turning - ISO #60
taper piloted flange mount
Tool shank for milling - ISO #50
Maximum tool weight 50kg (110 lb)
Tool jib crane - 500 lbs
Voltage - 3ph/480V AC, 60Hz
Primary power capacity - 120kVA
Overall machine height - 5600mm (220")
Machine weight - 18,000kg (40,700 lbs)
Note: No control on this machine; it had a Mitsubishi control on it originally, was not supported anymore, model tmc, scrapped it, ready for retrofit of a new control; just needs control, drives rewired, total electrical retrofit needed. Original cabinets included with machine.
Base machine is in great condition ready to retrofit with new controller by buyer.
Notes: Some of the sheet metal and conveyors are in an enclosed semi trailer.
The major components are in the same location
(heated and dry) as the pictures. The machine base components, hydraulic unit and tool changer are all inside our building and dry. The other pics of the electrical cabinet, conveyor, covers and guard, motor, etc. are stored in a semi trailer and dry. The only rust I saw was some surface rust on the telescoping covers for the cross rail. This is typical for a running machine as these covers are not ever painted.
Mechanical: When we received this machine, we
disassembled to the extent necessary to inspect all the slide and inspected the wear surfaces and gibs. They were all in great and everything still had scrape pattern in all surfaces. No scraping was necessary. We also inspected the ball screws and they check out the same as the ways. This machine obviously seen very little use. We do know, it came out of a GE Aircraft facility and run jet engine components only. They replaced this machine will a new OM vertical because of the CNC control was no longer supported. It was a Toshiba controller. The table was removed and the bearing inspected. They were like new also. Basically, the entire machine was checked out mechanically and all was in great shape.
As you can see in the pics, the storage of this machine has no effect on the components. The protective cross slide covers are present with some surface rust, the conveyor look good, the hyd. tank is inside and is shown in one of the pics, the ATC is in our storage area on the shelving and the splash guard and covers are, as far as I can tell, are present and in good shape. Although the components are in 3 different places, they were closely tracked and protected.
This machine is in excent. mechanical condition and used only on aircraft parts manufacture. This machine needs retrofit with new controller and will be sold as is.
|
|
|
|
| Buyers Premium:
A 5 % Buyers Premium applies to the final sale price of this item
|
This Ad Has Been Viewed Times.
|
|
 |
|
|
| Modify / Renew Ad | Delete Ad | Lease Application | Add or Remove Photo |
View All Ads Posted By This User |
01020080-9037 |
 |
***We strongly encourage personal inspection of all pieces of used equipment***
|
***All Price, Location and Specifications Subject to Change without Notice***
|
***Warranty: Machine sold "As is, Where is " buyer inspection encouraged***
|
| Terms:
Offer is subject to withdrawal and prior sale. Price excludes all
applicable taxes, de-installation, rigging/loading and shipping, all of
which will be Buyer's responsibility. Risk of loss and title pass on floor
at current location of equipment immediately upon transfer of funds. All
orders and agreements made by sales representatives are subject to approval
by an authorized officer of the seller. Seller has no direct knowledge
regarding prior use, maintenance, condition or usability for buyer's
purpose, therefore Buyer agrees to inspect the equipment, and verify that it
meets their needs and desires. Descriptions of condition of the equipment
are not warranties. Descriptions are intended only as a courtesy and their
accuracy is not guaranteed. Buyer agrees to verify sell items, descriptions
etc. prior to purchase for his use. All equipment is to be sold AS IS, WHERE
IS, WITH ALL FAULTS, and without warranties of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Seller will not be liable for any incidental
damages, consequential damages, or lost profit damages, including any
damages relating to delayed delivery, and any damages shall be limited to
the price paid to Seller. Buyer and/or users shall be responsible to provide
proper safety devices, equipment and training, and to comply with all
governmental (local, county, state or federal) industry, or company required
safety standards, including, but not limited to ALL OSHA standards. Buyer
shall defend and indemnify Seller and Seller's sales representatives and
partners from any claims or liabilities arising from the setup, operation,
transporting, trucking, shipping, rigging, loading or other use of the
equipment. Any claims against Seller shall be heard in North Carolina courts
without a jury, and be decided under North Carolina State law.
|
|
See Standard Terms And Conditions
|
|
